Pattern Parameters
The following functions are contained in the menu of the M1plus main program:
|
Function |
Target |
|---|---|
|
|
Open the Configuration dialog box with the pattern parameters. |
|
|
Select a new machine, a gauge or the Setup type for the pattern. |
|
|
Select machine attributes for the pattern. |
|
|
Call up tables:
|
|
|
Open stitch length table and assign stitch length to the pattern or module. |
|
|
Open stitch length table and assign stitch length (second tension) to the pattern or module. |
|
|
Open PNP table and assign reclaiming to the pattern or module. |
|
|
Open fabric take-down table and assign fabric take-down to the pattern or module. |
|
|
Open Auxiliary Take-down table and assign auxiliary take-down to the pattern or module. |
|
|
Allocate a cycle to the pattern or module. |
|
|
Open carriage speed table and assign carriage speed to the pattern or module. |
|
|
Open racking correction table and assign racking correction to the pattern or module. |
|
|
Open the Setup data in the Setup2 Editor. |
|
|
Reduce the memory size of the pattern. |
|
|
Open GlobalParameters dialog box. |
: New patterns are automatically cleaned up.