Without Adjustment - Keep Grouping of Pattern
With this setting, you determine for the direct insertion mode, whether the grouping from the module will be applied or the grouping in the pattern is retained.
With an active setting, the modules without row alignment will be inserted in the pattern without applying the grouping from the module.
With it the groupings are canceled for insertion in a manner not visible to the user. As a result, it is, for example, possible to position a module with several pattern rows in the pattern in a pattern row if this row contains the same or more technical rows than the entire module.
Insert module without row alignment and retain groupings in the pattern:
This function is only available for expanded patterns before the technical processing.
- The design pattern is expanded or the pattern was generated in the technical mode.
- The rackings of the individual technical rows in the module do not match the rackings of the corresponding technical rows in the pattern.
- The Technical View is active in the Technical Row presentation.
- 1
- Select module.
- 2
- Run the function in the menu.
- or -
Click the
icon in the toolbar. - 3
- Activate the setting in the / menu.
- 4
- Click the icon
in the module data toolbar.
- The fabric view opens with the expanded symbol view.
- 5
- Position the module on the desired technical row.
- The module echo is yellow if the module can be placed.
Empty rows which may arise when the module is placed are not automatically removed.
The module echo is red when a conflict exists. The module can be inserted, however, by pressing the ^ key simultaneously. Conflicts can occur in the following cases:
- A knit is set to a transfer row in the pattern.
If the module is inserted anyway, transfer actions in this row are removed from the pattern. - A transfer is set to a knitting row in the pattern.
If the module is inserted anyway, knitting needle actions in this row are removed from the pattern. - The module specifies a racking different from that specified by the pattern.
If the module is inserted anyway, the racking of the module is applied in the pattern.
If you switch the expanded symbol view or change to another view, the function will be deactivated. The function is automatically activated after Technical Processing to prevent accidental insertion of modules following Technical Processing.