Sintral Check (program)

With Sintral Check, knitting programs (Sintral) for BMS, CMS and ADF machines can be tested for knitting ability and correctness.

The program can be called-up in the MC Program / Conduct Sintral Check... menu.

Sintral Check is a standalone program that can be used without the main program active as well.
Just call-up the Window menu / All Programs / Stoll M1 / Sintral Check.

Sintral Check provides the following options:

Test patterns with an available knitting program or any other knitting programs.
Carry out a test run for the knitting program for various machines and/or gauges.
A test run consists of the following phases: syntax check (spelling, grammar), reference check (functions and jumps) and a simulation.
Correct detected errors immediately by calling up the corresponding editors.
After saving the corrections in the corresponding editor, the test run can be repeated immediately without selecting it again.

Make the following settings in this dialog box:

Element	Meaning
	Start Sintral Check and display the test progress in the Simulation window. : This button is only available if a knitting program and a machine are selected.
Pattern section
	In this section, the name and path of the knitting program files used for the Sintral Check are set. : You can also use patterns for which the Sintral was generated. The knitting program data present in the pattern is automatically temporarily extracted and selected for the Sintral Check.
	Call up the Open dialog box for selection of a file.
.mdv / .seq / .zip	display the name of the pattern file or the sequence file.
Sintral	Display name of the Sintral file.
Jacquard	Display name of the jacquard file.
Setup	Display name of the setup file.
Path	Display path of the selected Sintral file. : The path specification is based on the pattern, if you have explicitly selected this in the Open dialog box. The path refers to the temporarily extracted knitting program files if you have run the Sintral Check for the active pattern.
External File section
	This section shows whether the loaded knitting program uses the automatic functions of the Stoll AUTOSINTRAL program and which Autosintral file is used for this purpose.
	None	The knitting program does not use an Autosintral.
	Autosintral	Autosintral file <maschine>.Auto_Sintral.sin of the Autosintral directory is used
	private	The user's own Autosintral file can be allocated.
	Call up the Open dialog box, where you can select one of your own Autosintral files. : The button is only available if the private entry is selected in the list field.
Machine section
	The machine that is active for the knitting program is displayed.
	Call up the Select machine dialog box. You can select another machine to check the knitting program for the desired machine.
Machine Type	Display type of active machine.
EAYSEQ	Enter the EAY command between the sequence elements. If the check box disabled, the S0Y command is entered between the sequence elements. (OKC Operating System 1.4)
Gauge	Display gauge of active machine.
Needle number	Display needle number of active machine.
	Display computer (central processing unit) used in the active machine.
	Display the coupling width (in inches) of the active machine if it is used in tandem mode.
System Distance	Display the system distance (in inches) of the active machine. 5" Distance of the knitting systems (D5) 5.2” Distance of the knitting systems (D5,2) 6" Distance of the knitting systems (D6) 9” Distance of the knitting systems (D9)
Sub section Yarn Carrier Drive	Type 1		Use the precious intarsia yarn carriers (120 mm)
Sub section Yarn Carrier Drive	Type 2		Use the new intarsia yarn carriers (85mm)
Sub section Clamping and Cutting Points	Selection according to the machine:
	8/8 --- 8/8		Use the simple number of clamping and cutting positions
	16/16 --- 16/16		Use the double number of clamping and cutting positions
	16/8 --- 16/8		Use only eight (every second) of the 16 clamping and cutting positions.
	0 --- 12/12		Use all of the 12 clamping and cutting points on the right-hand side
	0 --- 8/8		Use all of the 8 clamping and cutting points on the right-hand side
Tandem mode with Comb/Clamping and cutting	The setting is automatically made with a M1plus pattern for the CMS322TC-M or CMS 822. : Only available with CMS322TC-M or CMS 822.
Trace Section
	Trace is the step-by-step tracking of a program sequence. In this case, the existing Sintral command just selected for testing is displayed inverted in the display field during the simulation.
Switch on trace	Activate or deactivate the step-by-step testing.
Edit Box From line	WKT line from which the activated step-by-step testing is to be displayed.
Display Field
	The test program version, status display and the error which caused canceling are displayed in the text output field at the bottom edge of the main window. : A displayed error can be corrected immediately. Start the corresponding editor via the toolbar. After saving your correction, you can start the Sintral Check again immediately. Tip: If you would like to test a new program, you can remove the old messages beforehand with the Delete function in the context menu of the field.

Sintral Check (program)

Additional Information

For this, see also