Uninterruptable power supply UPS

An uninterruptable power supply is recommended in addition to the usual power supply to ensure reliable, fault-free operation of the M1plus pattern workstation.
Depending on the design, this assumes the power supply for a certain time in when the usual power supply fails.

Design	Bypass time	Use
Minimum	10 min	Completion of the current pattern editing step and saving of the open pattern file
Maximum	60 min	Continued working until the regular power supply is restored Completion of pattern editing and saving of the open pattern file

Comply with the consumption data of your pattern workstation when you specify the uninterruptable power supply.

Select the total output of the UPS system depending on the desired bypass time.

The bypass time can be extended by approx. 25% by switching off a picture-tube monitor and by approx. 10% by switching off a TFT monitor (70 VA).