Plissee Variant 2

Generate the shape for the variant 2 of the plissee skirt:

    1
    For the shape edge 3, enter the value 12 in the Width Stitches column.
  1. A module with the width of 12 needles will be inserted.
    2. 2
    Enter the value 92 in the Width --- column in order to place the module at the right position.
  2. The module will be inserted 92 needles to right of the left edge in order to have the last needle of the module right in the center of the pattern.
    4. 3
    Call-up the shape attribute Narrowing of this shape edge.
    4
    Enter Width 92.
    5
    Enter Binding-off from stepping 50
    6
    Select the Plissee module for Structure single jersey.
    7
    Call-up the shape attributes Fading-out of this shape edge.
    8
    Enter the fading-out width 0.
    9
    Select the Not knitting module for Structure single jersey.
    10
    Generate shape edge 4 with the Height Stitches 2 and Width \\\ 92.
  4. The pleats are positioned on one row.
    6. 11
    The additional plaits shall have the same width and shall be inserted lying next to each other.
    Generate shape edge 5 as follows:
    1
    Specify the shape attributes Narrowing of this shape edge:
    1
    Specify the shape attributes Fading out of this shape edge:
    1
    Complete the shape table.