Cycle counters in Setup or Sintral

Cycle counters of Setup2 pattern can optionally be written into Setup2 (recommended) or into Sintral.
You can make the following settings via Tools / Program Settings… on the Sintral tab:

Element	Meaning
Cycle counters in Sintral with Setup1 section
before START	Enter cycle counter before START.
afterSTART	Enter cycle counter after START.
As Comment	Enter cycle counter as comment.
not in Sintral	Do not enter cycle counter. Use the cycle counters of the CMS. : with Setup1 only
Cycle counters in Sintral with Setup2 section
before START	Enter cycle counter before START.
afterSTART	Enter cycle counter after START.
As Comment	Enter cycle counter as comment.
in Setup2	Enter cycle counter into Setup2. Without comment in Sintral. : with Setup2 only

: This setting takes effect to all patterns generated hereafter.

Even switchable cycles will be written to and read from Setup2

If Undefined (empty line) is stated in the Standard column the Min value of the first found cycle will be entered.
If another value as Undefined (empty line) is stated in the Standard column, this value will be entered into Setup2.

For this, see also