Yarn Carrier Type Normal2 +/-

Due to the disengaging arms, normal yarn carriers and intarsia yarn carriers can not be used side by side on one track.
Normal Type2 type of yarn carriers does not have disengaging arms but lifts the plunger like the Intarsia yarn carriers in case of a collision.

• You can combine the intarsia yarn carrier type1 or type2 and normal type2 on one track.
  Exclusively use yarn carriers without disengaging arms on one track!
  
  Yarn carrier limiter pointing outward:
  
• You must not combine the normal type2 yarn carrier with other normal or plating yarn carriers on one track.
  Exclusively use yarn carriers with disengaging arms on one track!
  
  Yarn carrier limiter pointing inward:
  
• There must be no yarn carrier with disengaging arms on the next inner neighboring track (2+6; 3+7).
• Sintral command: Y-1A:N2
• Minimal stopping distance among each other 85mm
• Minimal stopping distance to an intarsia yarn carrier type2: 87mm
• Minimal stopping distance to an intarsia yarn carrier type1: 104mm
• Engaging width in the range of 23mm – 46mm
  (mechanical, irreversible machining of the yarn carrier carriage)
• Available engaging widths: 23mm; 29mm and 46mm
• You can select the yarn carrier type Normal2 +/- in the Yarn Field Allocation dialog box in the Yarn Carrier Type column.
• You can change the machine type (CMS-TC <-> CMS-OKC) by the Change Machine/Gauge/Setup type... function in the Pattern Parameters menu.
  The CMS-TC type of machines does not support the normal yarn carrier type2.