CMS 502 HP [2] with reduced number of comb hooks
Together with the component type 2, the Stoll CMS 502 receives a comb with reduced number of comb hooks.
The machines are created in the :
- CMS 502 HP 5“ [2]
- CMS 502 HP 6“ [2]
Procedure for the use of the comb thread module
- 1
- Generate new pattern.
- 2
- Select the CMS 502 HP 5“ [2] or the CMS 502 HP 6“ [2] machine.
- 3
- Under section activate the
checkbox.
For creating the start the two options 
and are available.
- 1
- Make further settings for the start.
- 2
- Under the section of the tab activate the checkbox.
- After Technical Processing:
- 1. Last comb hook at the right selvedge.
- 2. Positioning the left or right fabric selvedge. Shifting by one or two needles (see table below).
- 3. Widening of the right start width by one comb hook. The distance of the positioning depends on the machine gauge (see table below). The tuck loops added are casted-off late.
- 4. Widening of the right start width and subsequent cast-off.
|
Machine gauge |
Distance |
|
E5, E2,5.2 |
1 |
|
E7, E3,5.2 |
1 |
|
E10 |
1 |
|
E12, E6.2 |
1 |
|
E14, E7.2 |
2 |
|
E16, E8.2 |
2 |
|
E18 |
2 |
The Float and Lock modules for knitting-in are adapted for this.
The Sintral function combthread is adapted to the CMS 502 HP [2] machine type and will be loaded automatically.
combthread_637_comb2.sin
combthread_638_comb2.sin