Status Line (symbol view, fabric view, technical view)

Module name

Shape Position

1. Position of the lower left corner of the shape.
->
2. Offset value of the position during moving.
=
3. New position during moving
: The display is only visible within the Open and position shape (shv, shp, shr) function.

Stitch length with NP index, NP value and mm value.
A position without a stitch length is displayed with [Unspecified stitch length].
: No mm value is displayed in the module editor.

Yarn number, yarn carrier and color.
In jacquard areas Jacquard: is displayed additionally before the number.
Plating colors are displayed with background and foreground colors.
Yarn carriers are specified with number and page.

Name of needle action

Outside shape is displayed in the area outside a shape.

Bed Front or Rear and color bars for the needle bed or additional needle bed.
: The additional beds are only visible in the technical view. The color bar is shown raised.

Column and row in the fabric view
: The number of the row is dependent on the active presentation type Technical Row Presentation or Pattern Row Presentation .

or

Column and row (technical row, pattern row) in the technical view.
: The column is output as follows:
< | 10: Column 10 left of center

or

Column starting from the center and row (technical row, pattern row) in the technical view with active Needle bed center display function.
: < |: left of the center, |>: right of the center