Parameter

The specifications for the yarn carriers, stitch length, fabric take-down and carriage speed which were taken from the Sintral function header are displayed in this section.
For display, the Sintral function must be selected in the Sintral function table. The name of the selected function appears in the Function display field.

The display is not available when no or several Sintral functions is/are selected.
For Sintral functions of type Head, no information is read out and displayed, as this type is only used for comments.

The parameters are visible in tables with consecutive line numbers in the following tabs:

Tab	Column	Meaning
YC		Contains the relationships of the yarn carriers to the yarn and to the yarn carrier position. If the Sintral function with the Used checkbox is switched on, then the entries are adopted in the Yarn field allocation dialog box. : If the entries in the Yarn field allocation are not present, use the Initialize button. The entries in the YC tab can be edited. To do this, click in the corresponding column to display the input cursor or a list field.
	YC rail	Specification of yarn carrier rail
	YC type	Specification of yarn carrier type. : The list field contains the entries N (Normal), I (Intarsia) and Empty field (without type) .
	Yarn No.	Specification of yarn number
	Yarn type	Specification of yarn type
	Position	Specification of yarn carrier position : The list field contains the entries left and right.
	Comment	Comment on yarn carrier
NP		Contains the specifications on the stitch length. If the Sintral function with the Used checkbox is switched on, then the entries are adopted in the Stitch length table. : The entries in the tab cannot be edited.
	NP index	Specification of the NP indexes
	Value	Specification of the NP value
	mm	With the checkbox active the value is in mm.
	Comment	Comment on stitch length
PNP		Contains the settings on reclaiming. If the Sintral function is switched on by the Used checkbox, then the entries are adopted in the PNP table. : CMS 730 S / CMS 830 S only.
	NP index	Specification of the PNP indexes
	Value	Specification of the PNP value
	Comment	Comment on reclaiming
NPS		Contains the specifications on the stitch length (second stitch tension). If the Sintral function is switched on by the Used checkbox, then the entries are adopted in the PNP table. : CMS 730 S / CMS 830 S only.
	NPS-Index	Specification of the NPs indexes
	Value	Specification of the NPS value
	Comment	Comment on second stitch tension
WMF		Contains the specifications for main take-down. If the Sintral function with the Used checkbox is switched on, then the entries are adopted in the Fabric take-down table. : The entries in the tab cannot be edited.
	WMF Index	Specification of the WMF indexes You have to specify the values for the main take-down.
	Comment	Comment on fabric take-down
W+F		Contains settings for the auxiliary take-down. If the Sintral function is switched on by the Used checkbox, then the entries are adopted in the Auxiliary Take-down table. : The entries in the tab cannot be edited.
	W+F-Index	Specification of the W+F indexes. You have to specify the values for the auxiliary take-down.
	Comment	Comment on auxiliary take-down
MSEC		Contains the specifications on the carriage speed. If the Sintral function with the Used checkbox is switched on, then the entries are adopted in the Carriage speed table. : The entries in the tab cannot be edited.
	MSEC index	Specification of the MSEC index
	m/s	Specification of the speed value in meters/second
	Comment	Comment on carriage speed
RS	RS	Number of the cycle counter If the Sintral function is switched on by the Used checkbox, then the entries are adopted in the Cycles table.
	Value	Value of the cycle counter
	Comment	Comment on cycle counter

With the same index (NP, PNP, NPS, WMF, W+F or MSEC) within the pattern and within the Sintral function, the index of the pattern will win.

The following buttons are present in the section:

Button	Function
Apply	Changes in the YC tab are applied for the pattern. : The button is available if the input cursor has been positioned in another field following a change.
Reset	Changes in the YC tab are undone and replaced with the value previously present. : The button is available if the input cursor has been positioned in another field following a change.
Reload	The parameters are reloaded in the display from the Sintral function. : The function is not available when no or several Sintral functions is/are selected.

For this, see also

Tables