Generate Combination Module

Generate a combination module:

    1
    Run the New / Combination Module... function in the Module menu.
    2
    The New Combination Module dialog box appears.
    3
    Select a module from the Module bar or the Module explorer and position it in a field of the dialog box.
    -  or  -
    Pull the module into the dialog box with Drag & Drop.
  1. The picture of the module appears in the field in which the module has been positioned. The module name is shown below the picture. The module width is automatically entered in the input field below it. The height of the respective modules must be identical for the modules in the bottom and top row. If you hold the cursor on the module in the dialog box, the module name will be displayed as well and additionally the size of the module. Here the first number indicates the number of needles of the module and the second number the number of pattern rows.
    4
    Change the values in the input fields.
    -  or  -
    Leave the values as they are specified.
    5
    Click on the OK button.
  1. The picture of the combination module appears as local module in the Module bar. For this purpose the <Pattern name> entry in the list field must be selected. If the changed value is less than the module width, the modules are inserted overlapping.
    The value 0 can be allocated to the modules in the left and right column. As a result, these modules are not inserted in the pattern during drawing.
    If no pattern was open when generating the combination module, then a prompt appears asking whether the combination module is to be saved to the module database. In this case the module appears in the Module explorer in the New modules module group.

The pictures of the combination modules have the symbol in the lower right corner.