Drawing with container module mirroring

With a mirror container module, which individual module is to be inserted in the pattern can be selected with the marking in the lower right corner. Meaning:

 

Meaning

The module at the lower left from the dialog box (= original module) is inserted on knitting layer 0.

The module at the lower right from the dialog box (= horizontal mirror from original module) is inserted on knitting layer 0.

The module at the upper left from the dialog box (= conversion from original module for knitting layer 1) is inserted on knitting layer 1.

The module at the upper right from the dialog box (= conversion from original module for knitting layer 1 and simultaneously horizontal mirror) is inserted on knitting layer 1.

If the front layer view has been activated in the Pattern presentations k&w toolbar, only the modules for the front layer can be inserted. If the Back layer is activated correspondingly, then only the modules for the back layer can be inserted.

Draw with a mirror container module:

    1
    Click on the position of the individual module to be used for drawing in the Modules toolbar or the Module Explorer for the desired container module within the marking.
    2
    Select the icon to be used for drawing from the Drawing Tools toolbar.
    3
    Draw with the individual module in the pattern.
  1. The individual module used appears in the pattern-local group of the Modules toolbar. The position within the mirror container module from which it originates is displayed with a green square within the marking of the container module .