Technical view for TC4 and TC-R

The illustrations each show one section of the technical view of the same pattern (transfers, e.g. V-neck) following Technical Processing.

For the first Technical Processing the machine CMS330TC4 was selected, and for the second Technical Processing the machine CMS330TC-R. The additional beds are shown in the technical view. The technical and pattern row, the stroke, the system and the racking are shown in the control column.

Opposing rackings are carried out in one stroke on the TC-R machine.
However, in the technical view for the TC-R machine opposing rackings are shown in two consecutive rows. The stroke and system values are identical for both rows. The control columns are shown without a separating line.

On the TC4 machine four strokes are required for the same transfer operations. The stroke and system values are different for these rows.

Due to the conversion/transferring when the machine is changed, the sequence of the technical rows for the TC-R and TC4 differs.

• Change machine from TC4 or TC-T to TC-R
• Change machine from TC-R to TC4 or TC-T