Change machine from TC4 or TC-T to TC-R

A pattern created for the CMS 330 TC4- or CMS 330 TC-T-machine can also be knitted with the CMS 330 TC-R-machine. For this purpose, you have to convert the pattern for the CMS 330 TC-R-machine.

Convert a pattern generated for the TC4 or TC-T machine to the TC-R machine:

  1. The technical and fabric views of the generated pattern are active.
    1
    Click on Load Expanded Pattern .
  1. The pattern before technical processing will be loaded.
    2
    Select the CMS 330 TC-R in the display field via the Pattern Parameters / Change Machine/Gauge/Setup type... menu.
    3
    Confirm entries with OK button.
  1. A dialog box appears with the message that the rackings will be corrected.
    4
    Confirm entries with OK button.
  1. The pattern will be converted for the TC-R-machine and the rackings will be corrected.
    The converted pattern is shown in the technical view.

If the dialog box is closed with the Cancel button, the machine is not changed and the pattern is not converted. To restart the conversion, the machine must be selected again with the Change Machine/Gauge/Setup type... function.