Change machine from TC-R to TC4 or TC-T

A pattern created for the CMS 330 TC-R- or CMS 330 TC4-machine can also be knitted with the CMS 330 TC-T-machine. You must convert the TC-R pattern for this purpose.

Convert a pattern generated for the TC-R machine to the TC4 or TC-T machine:

  1. The technical and fabric views of the generated pattern are active.
    1
    Click on Load Expanded Pattern .
  1. The pattern before technical processing will be loaded.
    2
    Select the CMS 330 TC4 or CMS 330 TC-T in the display field via the Pattern Parameters / Change Machine/Gauge/Setup type... menu.
    3
    Confirm entries with OK button.
  1. A dialog box appears with the message that the rackings will be corrected.
    4
    Activate the Resort additional needle bed transfer checkbox and confirm the dialog box with the OK button.
    -  or  -
    Confirm the entries with the OK button and click on theEdit / Resort Additional Bed Transfer menu
  1. The pattern will be converted and the transfer to the additional beds will be resorted.
    The converted pattern is shown in the technical view.

If the dialog box is closed with the Cancel button, the machine is not changed and the pattern is not converted. To restart the conversion, the machine must be selected again with the Change Machine/Gauge/Setup type... function.