PTS

The behavior for a stitch length change in a row is specified in this column.

Depending on machine type, the following possibilities are available for selection:

Element

Meaning

No entry

No PTS
The different stitch length will be ignored.

E

Extra Row
Areas with this different stitch length will be shifted to an additional, separate row.

=

The different stitch lengths of two adjacent areas are divided up into equal parts.

!

The stitch length in this area is to remain unchanged. The stitch tension change is carried out in the adjacent area.

Select whether or not a tension area is to remain unchanged:

With a module, an entry that has been transferred from GlobalParameters.mdv can not be changed. However, you can add and edit your own entries.

    1
    Click on the field in which the selection is to be made.
  1. A list field with the symbol appears.
    1
    Click on the symbol .
  1. The list field will be opened.
    1
    Click on the desired command.

When a new entry is inserted, the command = is selected in the default setting.

So that different NP values are possible in a row, the Different stitch length per technical row check box must be activated in Configuration. Otherwise the Adjust stitch lengths dialog box appears during Technical Processing. If the check box has not been selected, the Make no adjustment button can be selected here, to retain the different NP values in a knitting row.

Default machine speed in area of stitch tension change: MSEC=1.0
With the Sintral command MSECNPJ , the machine speed can be specified as desired in the area of the stitch tension change.

Meaning of entries in the following value table for modifying the stitch tensions:
Y = Number of needles for changing the stitch tension by one value
X = Number of needles for the idle time between the stitch tension change

Gauge

MSEC 1.0

MSEC 0.9

MSEC 0.8

MSEC 0.7

MSEC 0.6

MSEC 0.5

 

Y

X

Y

X

Y

X

Y

X

Y

X

Y

X

E 3

1.3

1.2

1.2

1.1

1

1

0.9

0.8

0.8

0.7

0.7

0.6

E 3,5

1.6

1.3

1.4

1.2

1.3

1

1.1

0.9

1

0.8

0.8

0.7

E 5

1.5

1.7

1.4

1.5

1.2

1.4

1

1.2

0.9

1

0.8

0.9

E 7

2.1

2.1

1.9

1.9

1.7

1.7

1.5

1.5

1.3

1.3

1.1

1.1

E5

2.4

2.3

2.2

2.1

1.9

1.8

1.7

1.6

1.4

1.4

1.2

1.2

E10

3

2.8

2.7

2.5

2.4

2.2

2.1

2

1.8

1.7

1.5

1.4

E12

3.6

3.3

3.2

3

2.9

2.6

2.5

2.3

2.2

2

1.8

1.7

E14

4.2

3.7

3.8

3.3

3.4

3

2.9

2.6

2.5

2.2

2.1

1.9

E16

4.8

4.2

4.3

3.8

3.8

3.4

3.4

2.9

2.9

2.5

2.4

2.1

E18

5.4

4.6

4.9

4.1

4.3

3.7

3.8

3.2

3.2

2.8

2.7

2.3