Import setup data
The following Sintral data can be imported from the setup file *.set into the M1plus:
- Values for the stitch cams (NP)
- Fabric take-down (WMF)
- Yarn carrier distance (YD)
- Yarn carrier correction (KI)
- Carriage Speed (MSEC)
- Values for the yarn length control (YLC)
Import data into the M1plus and apply them to the pattern:
- The pattern is open.
- 1
- Run the function in the menu.
- 2
- Select a setup file in the Import Setup dialog box.
- The data is imported and entered into the Stitch length table, Fabric take-down table, Carriage speed table, in the Configuration, in the Yarn Field Allocation dialog box ( section), the Yarn Length Control dialog box and the knitting program (Setup) which is saved in the pattern.
So that the values from the setup file can be clearly allocated, their indexes must be contained in the pattern parameters and used in the pattern.
If you change values on the machine when knitting off and save the setup data on the machine, you can quickly update the values in the M1plus with this import function.
The Setup file can be opened and edited with the Setup Editor.