General information for gore technique with tubular structures.
I. Drawing a gore pattern
It is worked with the basic CA:
Yarn color #25 is generally not used in CAs.
To achieve a accurate presentation of the non- knitting areas next to the goring, the yarn color #25 is used with float.
After the technical processing, the non-knitting area is changed to the color count 256.
II. Consider the carriage directions
Activate the Carriage direction control column. Then calculate the carriage direction in the gore area with the system number 1.
|
Direction in the gore observed [correct] | |
|---|---|
|
Basic pattern |
After technical processing |
|
|
|
|
Direction not observed in the gore [wrong] | |
|---|---|
|
Basic pattern |
After technical processing |
|
|
|
III. Drawing in gore areas.
Use of the vertical alignment arrows with fully fashion
- The pattern must use a shape.
- 1
- If this is not the case, create an empty shape.
- 2
- In the non-knitting areas of the gore filling is carried out in the shape with the arrow symbols Suspension downwards or Suspension upwards.
With the align symbol Align Vertically, the gore can be allowed to collapse or open again. This is also possible by areas.
Example fabric: