Required for Stamping-out with Special Techniques

Define binding-off after the body-sleeve-connection:

    1
    Draw in the area for binding-off the body with Suspending.
    2
    Draw in the steps for narrowing the body.
  1. Narrowings will done in the left and right sleeve:
    Narrow entire width of sleeve
    2. 3
    Color Arrangement:
    Enter the reference rows into the body in order to detect the shape data (narrowing stepping).

Define narrowing over the total width of the sleeve:

    1
    Draw in the shape color and the narrowing symbols manually over the total width of the Sleeve shape part.

Narrow entire width of sleeve on the Narrowing tab of the Shape Attributes dialog box does not take effect.

Define remaining narrowing:

    1
    Start the pattern and the Color Arrangement with narrowing rows (1).
    Not with suspending rows (2).

Pattern design

Color Arrangement

Edit the Color Arrangement CA_3 areas-0:2:0-2Y:

    1
    Define the reference rows of both layers (L0 + L1) of the Sleeve shape parts before the first narrowing (remaining narrowing).
    The reference row numbers of the Sleeve shape parts must be intended for the same layer as the reference row numbers of the Body shape part.
  1. The shape data of the Sleeve shape parts will be read correctly.
    3. 2
    Draw in Narrowing over the total width of the Sleeve shape parts.
  3. Corresponds to Narrow entire width of sleeve

Saddle shoulder

    1
    Draw with Separation
    2
    Draw the pattern design with the rows offset.
  1. The shape data of the Body shape part will be read correctly.
    3. 3
    Draw in the shape color and the narrowing symbols manually over the total width of the Sleeve shape part with narrowing the saddle shoulder.

Knit the neck goring separately:

    1
    Draw the left and right side of the gore in the shaped pattern above each other manually.
  1. The gore area will be knitted with one yarn carrier.