Assembly - rear carriage box

The plush attachment is built-in in the rear carriage box.

3-system machine
4-system machine
Tandem machine 2x2
Tandem machine 2x3

For doing this, proceed as follows:

1: Remove the rear carriage box

2: Remove the cam plate and the step motors

3: Dismantle cams

EKC machine OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E10│E12│E14│ E6.2│E7.2
EKC machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 2.0 machine
CMS 740
ST 611 to ST 811 ST 168 to ST 468

4: Built-in sliders.
Check height of pins. If necessary, bang in the sliders slightly; they may not project more than 0.4 mm over the sliders (if required, grind the pins down somewhat).

EKC machine OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E10│E12│E14│ E6.2│E7.2
EKC machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 2.0 machine
CMS 740
ST 611 to ST 811 ST 168 to ST 468

5: Build-in cams.

EKC machine OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E10│E12│E14│E7.2
EKC machine OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E6.2
EKC machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 2.0 machine
CMS 740
ST 611 to ST 811 ST 168 to ST 468

6: Exchange the jack sliders and the plungers.
When assembling the jack sliders, use new retaining rings.

EKC machine OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E10│E12│E14│ E6.2│E7.2
EKC machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 6.0 machine OKC 5.0 machine OKC 3.0 machine E5│E7│E8│ E2,5.2│E3,5.2│E5.2
OKC 2.0 machine
CMS 740
ST 611 to ST 811 ST 168 to ST 468