Presser Foot

Correction of the shift points of presser feet.
You can adjust the shift positions of the weft yarn presser foot to the corresponding knitting situation.

0 = shift position (default)
+ = later shift position
– = earlier shift position
↓ = shift-in position
↑ = shift-off position

Explanation

Value range

ESCI 1 -
ESCI 50

1 to 50 indirect specifications to correct the shift points of presser feet.
With one value each for shifting on or off of the functions weft yarn presser foot or knitting-in presser foot.
ESCI 50 is reserved for the change of colors with inverse plating.

Systems

On the machine only!
The active knitting systems of the corresponding knitting row are displayed.

1

2

3

W ↓ +/-

Correction of the shift-in point for the weft yarn presser foot

  • Positive value:
    • Move the shift point in direction of the carriage
    • Presser foot will be set down in delay.
  • Negative value:
    • Move the shift point in opposite direction of the carriage
    • Presser foot will be set down in advance.

Minimum value: 120 NIC
Maximum value: -120 NIC
Step width: 0,5 NIC

 

W ↑ +/-

Correction of the shift-off point for the weft yarn presser foot

  • Positive value:
    • Move the shift point in direction of the carriage
    • Presser foot will be pulled-up in delay.
  • Negative value:
    • Move the shift point in opposite direction of the carriage
    • Presser foot will be pulled-up in advance.

Minimum value: 120 NIC
Maximum value: -120 NIC
Step width: 0,5 NIC

E ↓ +/-

Correction of the shift-in point for the knitting-in presser foot

  • Positive value:
    • Move the shift point in direction of the carriage
    • Presser foot will be set down in delay.
  • Negative value:
    • Move the shift point in opposite direction of the carriage
    • Presser foot will be set down in advance.

Minimum value: 120 NIC
Maximum value: -120 NIC
Step width: 0,5 NIC

Only ADF!

E ↑ +/-

Correction of the shift-off point for the knitting-in presser foot

  • Positive value:
    • Move the shift point in direction of the carriage
    • Presser foot will be pulled-up in delay.
  • Negative value:
    • Move the shift point in opposite direction of the carriage
    • Presser foot will be pulled-up in advance.

Minimum value: 120 NIC
Maximum value: -120 NIC
Step width: 0,5 NIC

Only ADF!

Comment

Comment

ASCII Characters

1 nic = 1/16 inch = 1.5875 millimeters