If the Sintral MC program contains the functions Combthread and FF-Trans, the comb can be activated / deactivated during the production.
1
When beginning to knit the first piece, the setting is RS17=0, thus this piece starts using the comb.
2
If the other fabrics are to be processed without using the comb, the setting must be RS17=1, however, not earlier than after the machine has moved the yarn carrier with the comb thread to the clamping position in the first piece.
3
With RS17=1 the comb is deactivated and the other pieces will be produced connected by the draw thread as one. The yarn carriers remain at the fabric selvedge without clamping and cutting.
4
In case of different start width and end width the cast-off or knitting to the following start width will be carried out by the FF-Trans function.
5
When the piece number set is processed and the piece counter reached the value 1, the machine stops with MS in the last pattern row.
The PRINT message appears in the display. for cast-off set RS17=0.
6
Enter the value for RS17. Currently it is =1
7
If the setting remains RS17=1 it will be processed as before.
8
If it is set RS17=0, the yarn carrier is moved to the clamping and cutting position, the fabric is cast-off and the comb is activated.
