Step by Step to 'Pattern-16'

A pattern project with one pattern and the desired settings is created.

1: To draw select any desired drawing tool under the Dibujar group.

2: In the Colores de muestra tool window, select the desired pattern colors from the Colores de hilo color palette to draw-in the border.

3: Draw-in the border with the desired width and yarn color (# 6 e.g.) into the Muestra de diseño.


2	CA#1	DJ structure with weft yarn Border at left and right of one needle each
3	CA#2:	Moss stitch structure with weft yarn Border at left and right of two needles each
4	CA#3:	2x2 structure with weft yarn Border at left and right of two needles each

4: Select the total height of pattern rows for CA#1 in the Pasada de muestra control column.

5: Position the cursor in the pattern area.

6: Call up the context menu and select Selección / Generar Color Arrangement... .
- or -
Click directly the button in the ribbon.

The Color Arrangement Editor with the original standard knitting process of the 2 pattern rows is opened.

Original for all 3 Color Arrangements

7: Add the necessary quantity of columns to the color segment of yarn color #31 in the original CA#1.

8: Insert the necessary quantity of rows into the executing area.

9: Draw-in the needle actions for the structure into the color segments of the yarn colors #6 (pink) and #31 (yellow).

10: Correct the entries in the Números de referencia column.

11: Make entries to the following control columns:

Prensador W :

Activate weft yarn presser foot in the technical row 'enclose the weft yarn by knitting'
Define the type of weft yarn presser foot

: The Seleccionar la máquina dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

Corrección de prensador :

Set a different ESCI index for each of both the carriage directions in those technical rows in which the weft yarn presser foot is active.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

Ordenar pasadas técnicas :

Into the technical row with the weft yarn: Pasada de inserción del hilo de trama
Into the technical row to enclose the weft yarn by knitting Pasada de encerramiento del hilo de trama

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

12: Check the generated Color Arrangement on correct entries with the Verificar button.
: The knitting procedure cannot be checked!

13: If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aplicar button.

- or -
Close the tool window with button.

14: Close the prompt with the desired button:

Save: Color Arrangement is saved locally in the CA tool window.
Reject: The changes will not be saved.
Copy: The changed Color Arrangement is saved as copy in the CA tool window.

15: Enter the Color Arrangement via the control column into the desired rows of the design pattern.

16: Select the total height of pattern rows for CA#2 in the Pasada de muestra control column.

17: Position the cursor in the pattern area.

18: Call up the context menu and select Selección / Generar Color Arrangement... .
- or -
Click directly the button in the ribbon.

The Color Arrangement Editor with the original 'default knitting process' for the 2 selected pattern rows is opened.

19: Rename the Color Arrangement if necessary.

20: Modify the original Color Arrangement CA#2 as follows:

Color Arrangement CA #2

21: Check the generated Color Arrangement on correct entries with the Verificar button.
: The knitting procedure cannot be checked!

22: If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aplicar button.

- or -
Close the tool window with button.

23: Close the prompt with the desired button:

Save: Color Arrangement is saved locally in the CA tool window.
Reject: The changes will not be saved.
Copy: The changed Color Arrangement is saved as copy in the CA tool window.

24: Enter the Color Arrangement CA#2 via the control column into the desired rows of the design pattern.

25: Select the total height of pattern rows for CA#3 in the Pasada de muestra control column.

26: Position the cursor in the pattern area.

27: Call up the context menu and select Selección / Generar Color Arrangement... .
- or -
Click directly the button in the ribbon.

The Color Arrangement Editor with the original standard knitting process of the 2 pattern rows is opened.

28: Rename the Color Arrangement if necessary.

29: Modify the original CA#3 as follows:

Color Arrangement CA #3

30: Check the generated Color Arrangement on correct entries with the Verificar button.
: The knitting procedure cannot be checked!

31: If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aplicar button.

- or -
Close the tool window with button.

32: Close the prompt with the desired button:

Save: Color Arrangement is saved locally in the CA tool window.
Reject: The changes will not be saved.
Copy: The changed Color Arrangement is saved as copy in the CA tool window.

33: Enter the Color Arrangement CA#3 via the control column into the desired rows of the design pattern.

34: If necessary, define a cycle in order to extend the structures of the 3 pattern areas via the Ciclo (RS) control column.
: Pay attention to the repeat height of the structure!