Step by Step to 'Pattern-18'

  1. The pattern project Pattern-17 is open.
    1
    Save the pattern under a new name, e.g 'Pattern-18'
    2
    To draw select any desired drawing tool under the Dibujar group.
    3
    In the Colores de muestra tool window, select the desired pattern colors of the basic pattern from the Colores de hilo color palette (e.g. yarn colors # 3 and # 6) to create the pattern element for the border at the left and right.
    4
    Draw the left / right border into Muestra de diseño.

Border at the left

Border at the right

    5
    Select the area for the pattern element Border at the left.
    6
    Open the context menu with RMB and select Selección -> Crear parte de muestra... .
  1. Pattern element will be saved locally as Partes de muestra.
    2. 7
    Select the pattern element for drawing.
    8
    Draw in the pattern element starting from the third pattern row of the Muestra de diseño up to the end of the basic pattern at the left border.
    : Keep a desired quantity of rows without pattern element (e.g. SJ with yarn color #6) at the end of the basic pattern.
    9
    Select the area for the pattern element Border at the right.
    10
    Open the context menu with RMB and select Selección -> Crear parte de muestra... .
  2. Pattern element will be saved locally as Partes de muestra.
    3. 11
    Select the pattern element for drawing.
    12
    Draw in the pattern element starting from the third pattern row of the Muestra de diseño up to the end of the basic pattern at the right border.
    : Keep a desired quantity of rows without pattern element (e.g. yarn color #6 SJ) at the end of the basic pattern.
    13
    Select the desired total height of pattern rows for CA#1 (e.g. 114 row) in the Pasada de muestra control column.
    14
    Position the cursor in the pattern area.
    15
    Call up the context menu and select Selección / Generar Color Arrangement... .
    -  or  -
    Click directly the button in the ribbon.
  3. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.

Original for Color Arrangement

    16
    Insert the necessary quantity of rows into the executing area.
    17
    Draw-in the needle actions for transferring and weft yarn into the color segments of yarn color #3 (blue).
    18
    Check and correct the entries in the Números de referencia column.
    19
    Make entries to the following control columns:

: The Seleccionar la máquina dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

Alternative CA#2

Usage of the following needle actions

  • Hilo de trama / Transferencia hacia delante con preparación : Combination of transfer to the rear, weft yarn and transfer to the front

    20
    Check the generated Color Arrangement on correct entries with the Verificar button.
    : The knitting procedure cannot be checked!
    21
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aplicar button.
    - or -
    Close the tool window with button.
    22
    Close the prompt with the desired button:
    23
    Enter the generated Color Arrangement CA#1 via the control column into the desired rows of the design pattern.
    24
    Click the Inicio button under Vista previa in the Guiahilos ribbon.
  1. The New Pattern xx document window is opened as view and the Guiahilos ribbon appears.
    2. 25
    Open the dialog box via Mostrar guiahilos.
    26
    Select the yarn carrier with yarn color #3.
    27
    Select in the dialog box under Tipo the Hilo de trama Qw type of yarn carrier.
  2. The yarn carrier will be marked with the icon.
    3. 28
    If necessary or desired, make further settings for allocating yarn carriers.
    29
    Start the Procesamiento técnico:
    Show the Vista del tejido procesado.

Fabric View CA#1 + CA#2

    30
    Generate Sintral.
    31
    Start the Control Sintral.
    32
    Extraer the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-18.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-18.zip can be loaded onto the machine with an USB stick or via Ethernet.