What was new in CREATE PLUS V2.2

Data Backup of Private Files / Automatic Backup

• Content of the Data Backup:
  Backup pour la base de données des éléments de tricotage, pour les fils, pour les machines client et pour les mises en page d'impression de coupes à dimension.
• Sauvegarde des données tab
  Page de démarrage → Options
• 
• The automatic data backup will be done once a day.
  Réaliser automatiquement un backup quotidien lors du premier démarrage du programme
• You can start the data backup manually as often as you like.
  Créer un backup...
• Save

Symbol View / View

In addition to Désactiver le fond, the Désactiver l'avant-plan option is available now. Import for the raster-shape; therefore available within the status bar.

• Up to now:
  Display available only for the background and only by theConfigure View....
• 
• New view with background or foreground disabled by the status bar.
  Correction de groupe de la longueur de la maille (NPGK) button of the configurable view #1.
• 
• Note:
  With another view of #1, reset to STOLL default.
  You will find the function in the context menu of the status bar.
  Restaurer la représentation sur défaut STOLL

Module Selection by Path Navigation

Unified and extended view of the knitting element navigation (breadcrumb):
Restrictions are canceled.
Here as example Configuration:

• Comb thread module within V2.1
• 
• Restricted navigation among both of the directories of the STOLL module database.
• Comb thread module within V2.2
• 
• Unrestricted navigation to all items of the STOLL module database or of the pattern.
• 
  After the technical processing, the STOLL module (S) is shown belonging to the pattern as localized (L).

Symbol View / Drawing and Modifying

• Keyboard commands of the Baguette magique drawing tool
• New function for selecting by the magic wand
• Developed in order to edit the raster-shape (see below)
• The selection will be extended to the whole row if you create a selection by the magic wand and keep the SHIFT key pressed.
• 
• Selection of the blue area by magic wand (SHIFT + click of left mouse button)
• Selection without SHIFT key:
• 
• Selection of the blue area by magic wand (click of left mouse button)
• Hiding drawing attributes temporarily (keyboard command)
• Up to now:
  If there were drawing attributes on the user control and you wanted to create a selection beforehand, then you had to remove the drawing attributes and select them again after the selection had been created.
• New:
  Keeping the ^ key pressed, you can disable the selected attributes.
• Selection
• Press and hold the ^ key
• Execute the action (create new selection)
• Release the ^ key
• By the ^ key, you can recall the attributes which you had deselected by ESC.
• Function Mettre à l'échelle
• Mettre à l'échelle of the Modifier ribbon group.
• 
• You can scale the size of a selection or of a selected pattern element by this function.

Symbol View / Aller à

• The dialog box is extended by the following options:
• Go to Colonne
• Go to Aiguille
• Go to Jacquard Line Number
• Go to Numéro de ligne Sintral
• 
• Call-up of the function by the context menu of the view or by the CTRL + T keys.

Symbol View / Assigning Color Arrangements Automatically

• If the Prendre en compte les zones de dessin monochromes option is enabled in the Attribuer automatiquement les Color Arrangements dialog box, the function regards pattern areas with a single color.
• 

Importer une image

Context menu of the Pattern Elements tool window

• Yarn carrier color may occur in the created pattern element by the import as the colors of picture are related to the pattern colors by the RGB values.
• 
• You can exclude the use of yarn carrier colors by Utiliser les couleurs de guide-fil.

Fully Fashion / Lined Shape

The Découper le dessin function is omitted. The feature of creating a raster-shape (see below) replaces this function.

New graphical tools are available to edit the shape.

• Yableau des lignes / Inverser miroir
• You can select the side of the source when mirroring the stepping and / or the attributes.
• Inverser miroir de gauche à droite
• Inverser miroir de droite à gauche
• 
• Display of shapes in the tool windows
• Lined shapes of the Escaliers input format are marked in the Coupes tool window.
• 
• The display of a pattern with pending shape in the Dessin tool window has changed.
• Up to now:
• 
• New
• 
• A common symbol without concrete contour represents the pending shape.
  Relevant buttons only appear according to the state of processing of the pattern.
• Graphical Editing
• You can edit lined shapes (beside the Escaliers input format) graphically with the new tools.
• If the Modifier le calque de la coupe de ligne (Y) mode is enabled, these new tools are also available for the pending shape directly on the pattern.
• Moving the shape point by the left mouse button
• Adding a shape point at the cursor position
• 
• Moving by the arrow keys of the keyboard
• Moving a shape point is modified.
  The following shape points will no longer be moved accordingly; they will keep their positions.
• Tip: Select the all shape points you want to move.
• Improvement of moving marking points, shape elements and knitting ranges:
  Activating the button of the status bar is required now.
• 
• Multiple selection is possible now.

Fully Fashion / Raster-shape

The new procedure creating fully fashion patterns independently from a pending lined shape.

A raster-shape contains shape edges and shape markings.

The procedures of raster-shape and pending lined shape cannot be mixed up.

With import from M1plus (starting with version 7.5), a fully fashion pattern will always be created as raster-shape.

• Raster-shape / Shape Symbols
• You will find the shape symbols for editing the raster-shape in the Actions de l'aiguille tool window.
  Needle Actions
• 
• Extérieur de la forme
• Intérieur de la forme
• Lisières de forme (F2)
• Marquages de forme
• Aligner vers la gauche
• Aligner vers la droite
• Goussets
• Séparation
• Remplir l'encolure
• Remplir l'encolure
• Masquer
• Longueur de maille sur lisière de forme avant
• Longueur de maille sur lisière de forme arrière
• Supprimer les données de coupe
• If the shape symbols are not mutually exclusive, you have a multiple selection by the CTRL key.
• You can no longer insert the Extérieur de la forme needle action into the pattern.
• Note 1:
  The selected shape symbol overwrites the existing shape symbols when inserting it into the pattern.
  You can enter the shape symbol in addition by the CTRL key pressed.
  You can remove the shape symbol by the CTRL-ALT key.
• Note 2:
  Supprimer les données de coupe Removes all shape symbols and the edge colors.
  If you select Supprimer les données de coupe in combination with another shape symbol, only the selected shape symbol will be removed from the pattern.
• Note 3:
  The same logic is now used for the do not sink symbols as well.
• Raster-shape / View
• You can toggle the shape edges (at the left of image) and shape symbols (at the right of the image) by both of the new button of the status bar.
• Note: Use the F2 key to toggle both buttons together.
• 
• Combined with the new buttons Désactiver le fond / Désactiver l'avant-plan, the pattern will be displayed in its raster-shape.
• 
• Raster-shape / Context Menu
• Special items for the raster-shape are available in the context menu of the symbol view of the pattern.
• 
• Convertir la coupe en forme de quadrillage
  The data of the lined shape of a pattern with pending shape will converted to a raster-shape.
• Ouvrir les lisières de forme... and Ouvrir les marquages de forme... display the tool windows of the same names.
• Vérifier la forme de quadrillage
  Errors are reported as warnings.
• Supprimer la forme de quadrillage
  Removes all shape symbols from the pattern.
  After it, you can position a lined shape again.
• Now, the functions Compléter les icônes de forme manquants and Créer une nouvelle coupe à partir de la forme de quadrillage... apply to the raster-shape.
• Raster-shape / Creating
• Converting a pending lined shape creates automatically a complete raster-shape.
• If there is no lined shape available for the pattern, create the raster-shape manually by drawing-in the Extérieur de la forme areas, the shape edges, the shape symbols and the markings.
  All drawing tools are available for it.
• In the Lisières de forme tool window, you create, edit and select for drawing, the shape edge and its knitting technique for fading-out or its special stitch length.
• 
• In the Direction column, you specify the side of the fabric piece for the shape edge.
  The upright line represents Extérieur de la forme.
  The direction is important for modules greater 1x1 used for fading-out.
• In the Marquages de forme tool window, you create, edit and select for drawing, the shape markings and their knitting technique, their anchor points and distances.
• 
• In the Niveau Z column, you can specify the order if overlaying knitting techniques of different shape markings occur.
  The example shows the needle action above the cable module.
• Note: Shape edges and shape markings in use are shown in the Icônes de forme section of the Actions de l'aiguille tool window.
• Raster-Shape / Modifying
• A new tool has been developed in order to edit the raster-shape graphically and quickly. This appears at the user control if a edge color with shape symbol is selected.

1. Modifying a Shape Edge
2. 
• By the F7 key at the cursor position (left marking of the image), the shape data will be applied to the user control and the tool appears (right marking of the image).
• Meaning starting from the left:
  Tool applies to shape color #5 / widen the shape edbe by 1 / reduce the shape edge by 1 / set the shape edge to the selected width
• The shape symbol will be shifted according to the selection.
• The narrowing shape symbol will be kept untouched if you remove it from the selection (with the small x).
  Only the narrowing shape symbol will be modified if you remove the fading-out shape symbol.
• Repeated tapping the F7 key at cursor position:
  
2. Modifying within selection
• Selection via shape edge:
  Shape edge #5 will be modified within the selection.
• Switching off the selection icon by the small x button activates the shape edge in total.
• 
• Selection of several shape edges:
  The shown shape edge will be modified within the selection. You can switch to the other shape edge by picking its color with F6 (color under the cursor)
• 
• Switching off the edge color by the small x button activates all shape edges within the selection.
• 
• 
  You can modify both sides of the shape in common by a row selection.
  You can make the row selection quickly by the magic wand and the pressed SHIFT key.
  You can create each new selection without deselecting the shape attributes.
  Therefore, press the ^ key.

Knitting Program

ASCON device for the yarn length control is supported.

• Yarn Length Control (YLC)
• Select the operating mode in Configuration / Réglages supplémentaires.
• 
• Selecting an operating mode makes the Contrôle de la longueur du fil (YLC) control column available.
• 
• You can exclude individual pattern areas from measuring and controlling via the control column.
• 
• You allocate the yarn carriers to the measuring wheels in the Guide-fil tool window of the preview of yarn carriers.
• 
• After the allocation, the data will be applied to theLongueur du fil tab of the Setup Data tool window.
• 
• Note:
  You can select the operation mode directly in the Setup data as well. The selected operation mode will be adjusted between Setup data and configuration and vice versa.