Step by Step to Training Pattern

    1
    Creating a pattern project with one pattern and the desired settings.
    2
    To draw select any desired drawing tool under the Outils de dessin group.
    3
    In the Couleurs de dessin tool window select the desired pattern color from the Couleurs de fil color palette:
  • Couleur du magasin
    • : The yarn carriers are not automatically placed on the yarn carrier rails.
      The yarn carrier home position is determined in the Élaboration technique.
  • Couleurs techniques (do not use to create a design pattern)
    • : Yarn carriers are automatically placed on the yarn carrier rails due to STOLL default settings and are taken into account during the determination of the yarn carrier home position during the Élaboration technique.
  • Couleurs des guide-fils
    • : Yarn carriers are automatically assigned to a yarn carrier rail and remain unchanged during the determination of the yarn carrier home position during the Élaboration technique.
  • Effacer la couleur
  • Couleurs de vanisage
  • Couleurs multi-système
    For multi-system knitting

For drawing the design pattern, with it several yarn carriers may be necessary for each yarn color.

  • Bobbin with color
    Not used within design pattern
  • Bobbin with color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail. Yarn carrier home position can be determined automatically.

For drawing the design pattern, with it one yarn carrier is used for each magazine color.

  • Magazine Color
    Not used within design pattern
  • Magazine Color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail.
Yarn carrier home position can be determined.

Recommendation!

Draw the design pattern by yarn colors or magazine colors in order to get common yarn carrier home positions (order related data) for all the pattern within the order.

For drawing the design pattern, with a yarn carrier already positioned on the corresponding rail for each yarn carrier color in use.

Result:
The yarn carrier home position is already specified when drawing with yarn carrier colors.

: You can change a yarn carrier home position by re-drawing with another yarn carrier color or by the Changer de couleurs de guide-fils dialog box.

Couleurs techniques for creating or changing technical modules.

  • Starts
  • Picking-up after pressing-off
  • etc.
    4
    Draw the motif with the desired yarn color.

: When drawing the motif pay attention if necessary to even numbered heights of the color areas!

    5
    Click the Accueil button under Prévisualisation in the Guide-fil ribbon.
  1. The New Pattern xx document window is opened as view and the Guide-fil ribbon appears.
    2. 6
    Open the Guide-fil tool window.
    In Guide-fil group -> Afficher le guide-fil
  2. The Guide-fil tool window appears with the Fils et guide-fils disponibles tab active.

:
For each color in the pattern color tables used in the design pattern, a color area is created in the color parameter table. This means that you can make only one preset for this color area.
For pattern related, different changes of a color area sub-colors must be created. You have to draw them manually in the design pattern at the point to be changed. Then, other specifications can be set in the color parameter table.

Structure and column headers of the Paramètres de couleurs table:

Group 1: General / Table header:

  • 1st row:
    All the symbols identifying the table columns
  • 2nd Row 'D'
    Default settings for the respective column
    Settings from the STOLL file - cannot be modified at the moment

: Default settings are applied from a STOLL file and cannot be modified at the moment.
These are automatically applied to all colors without specifications.

Group 1: General

1. Column

Entry D for the definition of the 2nd row of the table
(D = Default settings for the table columns)

2. Column

Display for available sub-colors

Couleur

Display of all the colors used in a project

  • Symbol and color:
    Not visible but used within the design pattern.
  • Symbol and color + :
    Visible and used within the design pattern.

: The symbols are depending on the pattern color table they are origin.

Le guide-fil tricote une couleur multi-système

Specifications with multi-system knitting

Le guide-fil tricote une couleur de vanisage

Specifications with plating

Basculer

Settings for the swivelling of intarsia yarn carriers or of autarkic yarn carriers

Quantity of pattern rows for knitting-out, SEN edge and clamping
Define the distance from the end of the color field to the knitting-out, to the shifting to SEN edge or to the clamping.

Specify the maximum distance between the color fields of the yarn carrier.
If this value is exceeded, one of the intended actions will take place:

  • Knitting-out the yarn carrier
  • Move the yarn carrier to the SEN border
  • Clamp Yarn Carrier

Group 2: Knitting-in

Direction de départ

Specification of the knitting direction for the first row of a color (color area)

Nombre de colonne sans tricotage en entrée

Quantity of columns (needles) without Knitting-In module

Module pour le tricotage en entrée

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largeur de répétition pour le tricotage en entrée

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

Décalage des rangées pour le démaillage

Column appears automatically if a module for knitting-in with casting-off is used

Décalage de rangées pour le tricotage en entrée

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • Rangées de dessin
      Default Setting
    • Rangées techniques
  • Dans une rangée supplémentaire

Nœud / entrelacement au début

Presetting a module for knot / binding at start of a color area without / with knitting-in.

Décalage de colonne pour le tricotage en entrée avec nœud

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Group 3: Knitting-out

Direction de fin de tricotage

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

Module pour la fin du tricotage

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:
Example

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largeur de répétition pour la fin de tricotage

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

Décalage des rangées pour le démaillage

Column appears automatically if a module for knitting-out with casting-off is used

Décalage de rangées pour la fin du tricotage

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • Rangées de dessin
      Default Setting
    • Rangées techniques
  • Dans une rangée supplémentaire

Nœud / entrelacement à la fin

Presetting a module for knot / binding at end of a color area without or with knitting-out.

Décalage de colonne pour la fin du tricotage avec nœud

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Nœud / entrelacement à la fin column.

Group 4 : Intarsia Binding

Entrelacement intarsia à gauche

Presetting of a binding or no binding at the left border of the color area

Entrelacement intarsia à droite

Presetting of a binding or no binding at the right border of the color area

Direction de l'entrelacement intarsia à gauche

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • Entrelacement en entrée
    Binding at the left at the beginning of a knitting row
  • Entrelacement à la fin du tricotage
    Binding at the left at the end of a knitting row

Direction de l'entrelacement intarsia à droite

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • Entrelacement en entrée
    Binding at the right at the beginning of a knitting row
  • Entrelacement à la fin du tricotage
    Binding at the right at the end of a knitting row

Module pour l'entrelacement intarsia à gauche

Presetting of the knitting mode for binding at the left border of the color area

Module pour l'entrelacement intarsia à droite

Presetting of the knitting mode for binding at the right border of the color area

Group 5: Border Processing

Gradation autorisée sans élaboration du bord, à gauche

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

Gradation autorisée sans élaboration du bord, à droite

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

Module pour l'élaboration du bord à gauche

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the Gradation autorisée sans élaboration du bord, à gauche column.

Module pour l'élaboration du bord à droite

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the Gradation autorisée sans élaboration du bord, à droite column.

    7
    Carry out Élaboration technique if necessary.

: After carrying out the Élaboration technique you are able to view and weigh up the automatic processing, if corrections / optimizations are necessary.

    8
    Back to the Dessin de conception to make pattern-related changes.
    9
    Open the Guide-fil tool window again for this purpose.
    10
    Make the desired changes in the following groups:

Explanation 'Knitting-in':

The yarn carrier is at the fabric selvedge and must be brought into the fabric to knit at the beginning of its color field.

  • Default setting: Using Intarsia yarn carriers (swivelling)
  • To knit-in the yarn carriers there are different technical modules available in the Knit Explorer.
  • For knitting-in the yarn carriers from the fabric selvedge, the shortest distance (way) to the color field is always used by default.
    : Regarding the knitting technique, many options are available.
  • If there are various color areas of the same color available in the design pattern, then the yarn carrier is knitted-out at the end of the color area and then knitted-in again from its last position.

Example with the Tricotage en entrée Flottage - Cueillage, Entrelacement Cueillage technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-in

Direction de départ

Specification of the knitting direction for the first row of a color (color area)

Nombre de colonne sans tricotage en entrée

Quantity of columns (needles) without Knitting-In module

Module pour le tricotage en entrée

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largeur de répétition pour le tricotage en entrée

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

Décalage des rangées pour le démaillage

Column appears automatically if a module for knitting-in with casting-off is used

Décalage de rangées pour le tricotage en entrée

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • Rangées de dessin
      Default Setting
    • Rangées techniques
  • Dans une rangée supplémentaire

Nœud / entrelacement au début

Presetting a module for knot / binding at start of a color area without knitting-in.

: Entry in Intarsia color areas.

Décalage de colonne pour le tricotage en entrée avec nœud

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Direction of knitting-in yarn carriers:

The knitting-in direction of a yarn carrier is specified by the home position of the yarn carriers.

  • Yarn carrier is on the left side in the clamping and cutting device -> the yarn carrier is knitted from the left to the fabric selvedge.
  • Yarn carrier is on the right side in the clamping and cutting device -> the yarn carrier is knitted from the right to the fabric selvedge.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Two possibilities in the Guide-fil tool window:

  • In the magazine move the yarn carrier manually from 'undefined' to the desired side (left / right) of the magazine.

Automatic

Manually

Yarn carriers are positioned by default in the 'undefined' area in the magazine.

Result:
Yarn carriers are automatically placed on the yarn carrier rails during the technical processing and the yarn carrier home position is determined from it.

Rule:
The yarn carrier is placed on the side in the yarn carrier home position, where the yarn carrier has the shortest distance from their color field to the fabric selvedge.

Place the yarn carrier manually with LMB to the left or right in the magazine.

Result:
Yarn carriers are placed on the yarn carrier rails during the technical processing according to the positioning in the magazine. The yarn carrier home position is determined from it.

: The path for the knitting-in to the color field may be lengthened due to the manual moving.

  • Move the yarn carriers allocated to the yarn carrier rails to the desired rail side.

Example 1

Example 2

1

Yarn carrier on the right side of the yarn carrier rails

Yarn carrier 3A right was manually moved to the left side.

: When using yarn colors; it is also possible to move the yarn carrier to a different rail number.

2

Yarn carrier on the left side of the yarn carrier rails

:

  • Yarn carriers placed on the left side ((2)) are knit-in from the left.
  • Yarn carriers placed on the right side ((1)) are knit-in from the right.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Preset in Direction de départ column:

The following Intarsia process is used by default for the processing with the Élaboration technique.

: This even processing results in a beautiful, even fabric image with the highest machine run time, which is why the yarn carriers are also grouped. This way the run time is reduced.

Direction de départ column:

  • To change the knitting direction of the first stitch row of a color field
    : The change influences the 'even' Intarsia processing.

Preset with Nombre de colonne sans tricotage en entrée:

Nombre de colonne sans tricotage en entrée column:

A

Distance of the color field from the fabric selvedge in needles (columns), where no module is entered to be knit-in.

  • A ≥ value:
    Technical module for knitting-in is entered.
  • A < value:
    No technical module for knitting-in

Preset in Module pour le tricotage en entrée and Largeur de répétition pour le tricotage en entrée column:

  • These two columns work together.
    If a corresponding module is selected in the Module pour le tricotage en entrée column, then the Largeur de répétition pour le tricotage en entrée column is active or displayed.
  • The technical module for knitting-in consists of 2 pieces of information:
    • Binding
    • Repetition

Example

1

Binding

2

Repetition

Selection of the desired technical module for the knitting-in

Example: Tricotage en entrée Flottage - Cueillage, Entrelacement Cueillage

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 4

Preset in Décalage des rangées pour le démaillage column:

  • The Largeur de répétition pour le tricotage en entrée column and the Décalage des rangées pour le démaillage column are active, if in the Module pour le tricotage en entrée column a corresponding knitting-in module with casting-off is selected.
  • The technical module for knitting-in with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

Example

1

Binding

2

Repetition

3

Number of pattern rows for the cast-off

Selection of the desired technical module for the knitting-in

Example: Cueillage et Démaillage, Tricotage en entrée

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows the tuck is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in Décalage de rangées pour le tricotage en entrée column:

Décalage de rangées pour le tricotage en entrée column to move the knit-in row.

Standard behavior when knitting-in a yarn carrier to their color field

Use of the column
Décalage de rangées pour le tricotage en entrée

Yarn carriers are knit-in by default in the first knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-in 2 pattern rows before the start of the color field.

: The yarn carrier is located in the fabric until the color area begins to be knitted.
Recommendation: Using Intarsia yarn carriers.

Preset in Nœud / entrelacement au début and Décalage de colonne pour le tricotage en entrée avec nœud column:

These two columns work together, which means that if a corresponding module is selected in the Nœud / entrelacement au début column, then the Décalage de colonne pour le tricotage en entrée avec nœud column is active or displayed.

Example without column offset (default)

1

Module for the knitting-in

2

Selection e.g. of the Nœud, Cueillage, Début, Tricotage en entrée module

No entry in this Décalage de colonne pour le tricotage en entrée avec nœud column

Example with column offset

1

Module for the knitting-in

2

Selection of the Nœud, Cueillage, Début, Tricotage en entrée module

Entry of a value in this Décalage de colonne pour le tricotage en entrée avec nœud column

Example: -2

Explanation 'Knitting-out':

At the end of a color area, the yarn carrier is brought from the fabric to the fabric selvedge (knitted-out).

  • To knit-out the yarn carriers there are different technical modules available in the Knit Explorer.
  • The knitting-out (direction) of the yarn carriers is entered into the pattern according to the following points:
    • Pattern structure
    • Even Intarsia procedure
    • Yarn carrier positions

Example with the Fin de tricotage Flottage - Cueillage, Entrelacement Cueillage technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-out

Direction de fin de tricotage

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

Nombre de rangées pour fin de tricotage

Preset of the distance of color areas from which on knitting-out starts.

Module pour la fin du tricotage

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largeur de répétition pour la fin de tricotage

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

Décalage des rangées pour le démaillage

Column appears automatically if a module for knitting-out with casting-off is used

Décalage de rangées pour la fin du tricotage

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • Rangées de dessin
      Default Setting
    • Rangées techniques
  • Dans une rangée supplémentaire

Nœud / entrelacement à la fin

Presetting a module for knot / binding at end of a color area.

: Entry in Intarsia color areas.

Décalage de colonne pour la fin du tricotage avec nœud

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Nœud / entrelacement à la fin column.

Preset in Direction de fin de tricotage column:

: With the Élaboration technique, the yarn carriers are calculated and knitted-out automatically according to the pattern.

  • Direction de fin de tricotage column, to manually influence the automatic calculation of the knitting-out.

: The manual change of the direction of the knitting-out of a color field influences the processing of the following pattern rows in the basic pattern.

Preset with Nombre de rangées pour fin de tricotage:

Quantity of pattern rows for knitting-out, SEN edge and clamping column in group 1 - General

A

Preset of a distance between two color fields of a yarn carrier in pattern rows

Default setting (A) 3 (pattern rows)

Result:

  • Distance A < 3:
    At the end of the first color area no knitting-out is entered and therefore no knitting-in for the second color area. The yarn carrier stops in the fabric.
    : The use of Intarsia yarn carriers is recommended for this.
  • Distance A ≥ 3:
    At the end of the first color area a 'Knitting-out' technical module is entered and therefore also a 'Knitting-in' technical module for the second color area.
    The yarn carrier is positioned at the fabric selvedge.

Preset in Module pour la fin du tricotage and Largeur de répétition pour la fin de tricotage column:

  • These two columns work together.
    If a corresponding module is selected in the Module pour la fin du tricotage column, then the Largeur de répétition pour la fin de tricotage column is active or displayed.
  • The technical module for knitting-out consists of 2 pieces of information:
    • Binding
    • Repetition

: The behavior of the 'Knitting-out' technical modules is identical with the behavior of the 'Knitting-in' technical modules.

Selection of the desired technical module for the knitting-out

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.
Example: 4

Preset in Décalage des rangées pour le démaillage column when knitting-out:

  • The Largeur de répétition pour la fin de tricotage column and the Décalage des rangées pour le démaillage column are active, if in the Module pour la fin du tricotage column a corresponding knitting-out module with casting-off is selected.
  • The technical module for knitting-out with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

: The behavior of the 'Knitting-out with casting-off' technical module is identical with the behavior of the 'Knitting-in with casting-off' technical module.

Selection of the desired technical module for the knitting-out

Example: Cueillage et Démaillage, Fin de tricotage

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in Décalage de rangées pour la fin du tricotage column:

Décalage de rangées pour la fin du tricotage column to move the knit-out row.

Standard behavior when knitting-out a yarn carrier from their color field

Use of the column

Décalage de rangées pour la fin du tricotage

Yarn carriers are knit-out by default in the last knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-out 2 pattern rows after the end of the color field.

: The yarn carrier is located at the end of the color area until the knitting-out in the fabric.
Recommendation: Use Intarsia yarn carriers.

Preset in Nœud / entrelacement à la fin and Décalage de colonne pour la fin du tricotage avec nœud column:

These two columns work together, which means that if a corresponding module is selected in the Nœud / entrelacement à la fin column, then the Décalage de colonne pour la fin du tricotage avec nœud column is active or displayed.

Example without column offset (default)

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

12

Module for Knitting-out

2

Selection of the Nœud, cueillage, fin module

No entry in the Décalage de colonne pour la fin du tricotage avec nœud

Example with column offset

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

13

Module for Knitting-out

2

Selection of the Nœud, cueillage, fin module

Entry of a value in the Décalage de colonne pour la fin du tricotage avec nœud column

Example: -2

Explanation 'Intarsia Binding':

Two neighboring knitting areas (color areas) are connected with each other, with the help of the 'Intarsia Binding'.

  • For the Intarsia binding there are different technical modules available in the Knit Explorer.
  • Each color area has a left border and a right border, that can be edited independently from one another.
  • The Intarsia binding is entered corresponding to the carriage direction.

Intarsia Binding

Entrelacement intarsia à gauche

Presetting of a binding or no binding at the left border of the color area

Entrelacement intarsia à droite

Presetting of a binding or no binding at the right border of the color area

Direction de l'entrelacement intarsia à gauche

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • Entrelacement en entrée
    Binding at the left at the beginning of a knitting row
  • Entrelacement à la fin du tricotage
    Binding at the left at the end of a knitting row

Direction de l'entrelacement intarsia à droite

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • Entrelacement en entrée
    Binding at the right at the beginning of a knitting row
  • Entrelacement à la fin du tricotage
    Binding at the right at the end of a knitting row

Module pour l'entrelacement intarsia à gauche

Presetting of the knitting mode for binding at the left border of the color area

Module pour l'entrelacement intarsia à droite

Presetting of the knitting mode for binding at the right border of the color area

'Intarsia Binding at the Left' for the left selvedge of a color field:

Connection at the left selvedge of a color field to their neighboring left color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the Cueillage devant, Entrelacement intarsia module.

Use of the Entrelacement intarsia à gauche column to make the following settings:

  • Entrelacement MARCHE : a Intarsia binding at the left of the color field edge will be entered
  • Entrelacement ARRÊT : no Intarsia binding at the left of the color field edge will be entered
  • Automatique : Default Setting
  • Par défaut : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Entrelacement MARCHE

At the left selvedge of the color field ((2)) a Intarsia binding is entered.

Entrelacement ARRÊT

NO Intarsia binding is entered at the left selvedge of the color field ((2)).

'Intarsia Binding at the Right' for the right selvedge of a color field:

Connection at the right selvedge of a color field to their neighboring right color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the Cueillage devant, Entrelacement intarsia module.

Use of the Entrelacement intarsia à droite column to make the following settings:

  • Entrelacement MARCHE : a Intarsia binding at the right will be entered
  • Entrelacement ARRÊT : no Intarsia binding at the right will be entered
  • Automatique : Default Setting
  • Par défaut : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Entrelacement MARCHE

At the right selvedge of the color field ((1)) a Intarsia binding is entered.

Entrelacement ARRÊT

At the right selvedge of the color field ((1)) NO Intarsia binding is entered.

Example: NO Intarsia binding between two color fields

: The Intarsia binding at the right and left was turned off in all color fields. This way a vertical opening results.

Direction de l'entrelacement intarsia à gauche for the left selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

Direction de l'entrelacement intarsia à gauche column

Entrelacement en entrée

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

Entrelacement à la fin du tricotage

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

Par défaut

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

'Direction of the Intarsia Binding at the Right' for the right selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

Direction de l'entrelacement intarsia à droite column

Entrelacement à la fin du tricotage

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

Entrelacement en entrée

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

Par défaut

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Preset in 'Module for Intarsia Binding at the Left' and 'Module for Intarsia Binding at the Right' column:

  • For the Intarsia binding there are different technical modules available in the Knit Explorer.
    • Binding with tuck
    • Binding with stitch
    • No binding (= vertical opening)
  • Column Module pour l'entrelacement intarsia à gauche:
    Selection of the module to be used at the left border of the color field
  • Module pour l'entrelacement intarsia à droite column.
    Selection of the module to be used at the right border of the color field
  • Variable module allocation at the left and right color field border

: Combination possibilities of the different bindings:
There are many options how the types of bindings at the color field selvedges
can be combined, where the right and left color field selvedge may also
differ from one another.

Example: Module Cueillage devant, Entrelacement intarsia (Standard)
  • Light blue marking:
    Intarsia Binding at the Left: Tuck
  • Light green marking:
    Intarsia Binding at the right: Tuck

: Tuck binding is not visible on the front side of the fabric.

Example: Module Maille avant, entrelacement intarsia

  • Light blue marking:
    Intarsia Binding at the Left: Stitch
  • Light green marking:
    Intarsia Binding at the right: Stitch

: Stitch binding is visible on the front side of the fabric.

Front Side of Fabric

Explanation 'Border Processing':

The concept 'Border processing' describes the processing of the steps at the left / right border of a color area (edge) depending on the carriage stroke direction. The yarn carrier is positioned according to the shape for the following knitting row, with the help of the border processing.

  • For the Traitement du bord there are different technical modules available in the Knit Explorer.
    • Feed:
      The concept 'Feed' describes the positioning of a yarn carrier regarding the following knitting row of its own color field. For this, there are different options regarding the knitting technique.
  • Each color area can be edited differently at the left / at the right.
  • The modules are entered according to the carriage direction.

Group: Border Processing

Gradation autorisée sans élaboration du bord, à gauche

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

Gradation autorisée sans élaboration du bord, à droite

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

Module pour l'élaboration du bord à gauche

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the Gradation autorisée sans élaboration du bord, à gauche column.

Module pour l'élaboration du bord à droite

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the Gradation autorisée sans élaboration du bord, à droite column.

Gradation autorisée sans élaboration du bord, à gauche and Gradation autorisée sans élaboration du bord, à droite for the borders of a color field:

'Allowed stepping' describes the number of needles, where the module for the border processing is not entered.

: Default value with 'allowed stepping' at the left and right is 1 needle.

  • Gradation autorisée sans élaboration du bord, à gauche
  • Gradation autorisée sans élaboration du bord, à droite

Examples
Gradation autorisée sans élaboration du bord, à droite

Allowed stepping: 1 needle (standard)

Allowed stepping: 2 needles

Allowed stepping: ≥ 3 needles

:

The yarn carrier is kicked and then with the module for knitting-in is fed to the following knitting row.

Selection Module pour l'élaboration du bord à gauche and Module pour l'élaboration du bord à droite for the borders of a color field:

For the border processing of a color area there are different knitting techniques available as technical modules.

: The Cueillage, --v--, Traitement du bord technical module is used by default.

  • Module pour l'élaboration du bord à gauche
  • Module pour l'élaboration du bord à droite

Examples for Module pour l'élaboration du bord à droite

14

Border processing in the carriage stroke from right to left

2

Border processing in the carriage stroke from left to right

Black marking = Intarsia binding

About the procedure based on the technical module for border processing at the right Cueillage, --v--, Traitement du bord

A

The information is entered 1 time each at the start and end of the knitting row

B

The information is entered x times according to the step width.

: The entire steps width minus 2x area width (A) minus preset under Allowed stepping without border processing at the right (C) = rest of the step width. This rest is now filled up with area width (B).

C

The information is entered x times according to the preset under Allowed stepping without border processing at the right.

    11
    Start Technical Processing:
    12
    Generate Sintral.
    13
    Start the Contrôle du Sintral.
    14
    Extraire the knitting program.
  1. A program for the knitting machine will be created: CMS530. Exercise_Pattern.zip.
  2. Load knitting program into the machine.

: The extracted file "CMS530.Exercise_Pattern.zip" can be loaded onto the machine with an USB stick or via Ethernet.