Step by Step to 'Pattern-1'

A pattern project with one pattern and the desired settings is created.

1: To draw select any desired drawing tool under the Dessiner group.

2: ----------------------------------------

3: Carry out Élaboration technique if necessary.
: After carrying out the Élaboration technique you are able to view and weigh up the result of the automatic processing, if corrections / optimizations are necessary.

4: Back to the Dessin de conception to make pattern-related changes.

5: Open the Guide-fil tool window for this purpose.

6: In the Paramètres de couleurs table make the desired changes in the following groups, if necessary:

Début / fin du tricotage
Entrelacement intarsia
Traitement du bord

7: If desired, make the desired presets in the following control columns:

Stitch Length (NP)
Tirage principal (WMF)
Vitesse (MSEC)

8: If necessary, make the desired presets for combining yarn carriers in the Réglages supplémentaires tab of the Configuration dialog box.

Several yarn carriers are combined in one system by the technical processing (knitting sequence) to optimize the production time.

:
The yarn carriers will be combined only if this is possible based on the color field distances.
The result is visible in the Vue des icônes after the technical processing.

Options in the Configuration dialog box

1: In the ribbon select the Configuration button.

The dialog box appears.

2: Select the Réglages supplémentaires tab.

3: Make the desired presettings for the Regrouper les guide-fils.

Yarn Insertion:
Insertion du fil sûre en cas d'augmentation de la couleur is active (standard)


1	Yarn Insertion
			Do not combine (Default setting)
			No automatic combining of the yarn carriers. : High run time because of regular knitting process for Intarsia: Nice, uniform binding at the color field borders
		Par défaut
		Automatic combining of the yarn carriers, where the result cannot be influenced. : Shortest run time with possible problems with the Intarsia binding (tuck) at the color field border.
		Insertion du fil sûre en cas d'augmentation de la couleur
		Automatic, uniform combining of the yarn carriers with an optimized knitting process for secure yarn insertion with the tuck binding. : Uniform Intarsia binding will be achieved at the color field border. Reduced run time without problems with the Intarsia binding (tuck)
2	NPJ autoriser lors du groupement des guide-fils
		NPJ autorisé (default setting) Result: Two color areas can be combined by the technical processing, due to the distances and the differently defined stitch tensions (NP).
		NPJ autorisé is disabled Result: Two color areas could be combined due to the distances. Due to the differently defined stitch tensions (NP), these color fields are not combined by the technical processing.
3	Distance supplémentaire entre guide-fils pour corrections sur la CMS
	1/16 pouce			Adjust the safety distance in order to make corrections on the machine (YC/YCI in the setup). Default value: 0 : You can specify a shorter yarn carrier distance especially with coarser gauges.

9: Start the Élaboration technique.
With the button, show Symbol view after technical processing.

The yarn carriers are automatically combined after the set specifications and the Intarsia rules (constructive facts of the Intarsia yarn carriers on the machine).