Step by Step to 'Pattern-8_2system'

Stoll-ikat plating ®

For Stoll-ikat plating®, two plating colors (= a plating color combination) per pattern row are required for each color change by one system. You can use a different plating color combination in each system. A maximum of 30 changes of position are allowed in one pattern row, where a distance of 2 inches (with 1.0 m/s) between the color changes is to be respected.

  1. A pattern project with the Pattern-8_1system pattern and the desired settings is created.
    1
    Duplicate the Pattern-8_1system pattern.
  1. The plating color P1 and P2 are entered into all pattern rows of the design pattern.
    2. 2
    Draw the plating colors P3 and P4 manually into the second pattern row.

1

The first pattern row contains P1 and P2, which work in the first knitting system.

2

The first pattern row contains P3 and P4, which work in the second knitting system.

    3
    Create a selection based on the combination of plating colors P1 + P3.
    4
    Create a pattern element via the context menu Sélection -> Élaborer la partie de dessin... .
    5
    Use the same procedure to create a pattern element with the plating colors P2 + P4.
  1. Two pattern elements are created.

Pattern Element of P1 + P3

Pattern Element of P2 + P4

    6
    Use the drawing function Remplir la ligne rechercher vers la gauche et vers la droite with the settings Couleur de fond and Bord exact to fill the respective areas.
    7
    If desired, modify the value under Vanisage renversé in the Réglages supplémentaires tab of Configuration.

Maximum quantity of needles with separating knitting rows to several systems.

  • Color fields up to 27 needles wide are divided up = inverse plating
  • Color fields wider than 27 needles are not divided up = Stoll-ikat plating®

: The default setting depends on the gauge: = 2 inch minus one needle.

    8
    Draw the plating color P5 into the local knitting element Début, 2x2
    9
    Select an existing shape from the Coupes tool window and place it on the pattern.
    10
    If necessary, make the desired settings in the Guide-fil tool window.
    11
    Carry out all the steps of processing.

: Stoll-ikat plating ®
Inverse plating with changing position of the yarn carriers within the same system.
This means that the pattern rows are not separated into technical rows.

: The extracted file "ADF530-32W.Pattern-8_2system.zip" can be loaded onto the machine with an USB stick or via Ethernet.