Edit and modify inserted Jacquards

I. Edit the inserted Jacquards:

  1. In the pattern there are areas with inserted Jacquard modules.
    1
    In the Início ribbon under Janela de ferramentas, open the Jacquards tool window.
    - or -
    Click on the Abrir Jacquards... in the context menu on the pattern.
  1. The Jacquards tool window is opened.

1

Selecionar as entradas das tabelas selecionados na amostra

The Jacquards selected in the table are not displayed as selection in the pattern.
: Selection via the first column in the table.

The Jacquards selected in the table are displayed as selection in the pattern.

ID

Consecutive numbering of the Jacquard areas

2

For drawing a Jacquard module in the pattern

  • The Jacquard area has the same colors as the selected Jacquard:
    No other entry necessary in the table
  • The Jacquard area has different colors from the selected Jacquard:
    Another entry necessary in the table

Index Color: Application in the search area of a Color Arrangement

: If there exist several patterns in the pattern project, the color is marked according to the active document (pattern) with (utilizado).

3

Módulo de Jacquard
Elemento de tricotagem para o avesso de Jacquard

  • Name of the Jacquard module with the 'L' identifier for local
  • Allocated knitting element color under Propriedades

4

Seqüência de cores
Ordem das cores de jacquard no avesso

Display for the color sequence for the first and second pattern row if Segunda seqüência de cores is not active.

5

Segunda seqüência de cores
Segunda seqüência das cores de jacquard para cada segunda fileira de amostra no avesso

Display for the color sequence for the second pattern row if Segunda seqüência de cores is active.

6

Graduação
Graduação para a área de Jacquard

Specification for the stitch length which is to be used in the pattern:

  • utilizar da amostra
  • do módulo
  • Personalizado

7

Offset de X

Deslocar horizontalmente o ponto de início do avesso.

Value in needles for the horizontal offset of a Jacquard module

8

Avesso mais estreito

Avesso em n agulhas mais estreito que a face da imagem

Value in needles, regarding how much the Jacquard back side is to be narrower in relation to the picture side.

:
If there are various entries, get a new Jacquard created with the desired value for Avesso do Jacquardmais estreito em.

9

Face da imagem
Face da imagem do jacquard na frontura dianteira e traseira

  • à frente
  • Rear
  • á frente e atrás

10

Início de rede Jacquard de bloco
Início de rede para o Jacquard de bloco

Display of the knitting elements in use for the net pick-up with continuous Jacquards

11

Cor de início de rede

Specification of the color (yarn carrier) which is used for the net pick-up knitting element

12

Fim de rede Jacquard de bloco
Fim de rede para o Jacquard de bloco

Display of the knitting elements in use for the net ending with continuous Jacquards

13

Cor de fim de rede

Specification of the color (yarn carrier) which is used for the knitting element

14

Início de rede Jacquard em intarsia
Início de rede para o Jacquard em intarsia

Display of the knitting elements in use for the net pick-up with Intarsia with Jacquard back

15

Eliminar Jacquards selecionados

The selected Jacquard is deleted in all the pattern where it is in use.

16

Seqüência de cores e graduação

Display or edit box for the stitch length per color / system for rear needle bed

: Depends on the selection under Graduação ((6)).

Display of the color sequence from the left for the Jacquard area selected in the table

Display or edit box for the stitch length per color / system for front needle bed

: Depends on the selection under Graduação ((6)).

Adicionar nova cor...

Segunda seqüência de cores

Default setting
The color sequence is the same as in the first pattern row

Definition of the color sequence for the second pattern row is possible.

:
The input panel for the color sequence for the second pattern row is displayed.

17

Amostra com atual Jacquard

List of the patterns, where the Jacquard selected in the table is in use.

: Attention:
By default, the Jacquard areas with the same Jacquard module and the exact same colors are grouped.

Ungroup the grouped Jacquard areas.

: Necessary, if different settings must be made for the Jacquard areas.

The Jacquard module inserted in the pattern will be removed from the area in the pattern.

Result:
In the pattern area, no Jacquard module is attached anymore.

    2
    Select the Jacquard to be changed in the table.
    3
    Make the desired changes in the tool window.
    4
    Close the tool window with X.
  1. The changes will be applied to the pattern.

II. Direct selection of a Jacquard module in the pattern:

  1. In the pattern there are Jacquard modules in use.
    1
    Position the cursor in a Jacquard area with an inserted Jacquard module.
    2
    Apply the Jacquard module with the F5 key.
    3
    Enter the selected Jacquard module via the control columns in the entire pattern width or only in an area within the pattern.
  1. The selected Jacquard module is inserted.

Pay attention whether the exact same colors are in use in the area to be entered or not!

III. Selection of a Jacquard module in the Jacquard table:

  1. In the pattern there are Jacquard modules in use.
  2. All the Jacquard modules in use are contained in the table.
    1
    In the Início ribbon under Janela de ferramentas, open the Jacquards tool window.
    2
    Select the desired Jacquard in the Jacquards tool window in the column.
    : Pay attention to the Jacquard colors in use!
    3
    Enter the selected Jacquard module via the control columns in the entire pattern width or only in an area within the pattern.
  1. The following message appears:
    Na área onde você desenhou existe pelo menos uma cor que não está contida no Jacquard da tabela. Área é conectada com um Jacquard apropriado. Se não existir nenhum, um novo Jacquard será gerado.
    2. 4
    Confirm message with:

IV. Adding an extra color:

The colors identified with knit only on the Jacquard back.

  1. In the pattern there are Jacquard modules in use.
  2. All the Jacquard modules in use are contained in the table.
  3. The Jacquards tool window is open.
    1
    Select a Jacquard in the first column of the Jacquards tool window.
  1. The color sequence is displayed in the tool window under Seqüência de cores e graduação.
    2. 2
    Select an additional color (additional color) in the empty edit box at the end of the displayed color sequence by the icon from the Cores da amostra tool window.
  1. The additional color is added to the color sequence and identified with .

V. Deleting an additional color marked with :

The colors identified with knit only on the Jacquard back.

  1. In the pattern there are Jacquard modules in use.
  2. All the Jacquard modules in use are contained in the table.
  3. The Jacquards tool window is open.
    1
    Select a Jacquard with additional colors in the first column of the Jacquards tool window.
  1. The color sequence is displayed in the tool window under Seqüência de cores e graduação.
    2. 2
    Position the cursor on the additional color -> click the Remover cor context menu.
  1. The additional color is removed from the color sequence.