Border Processing for Block Jacquard without Shape

Block Jacquard without border processing

Block Jacquard with border processing

The border processing for Block Jacquard with Jacquards with Float or Net rear sides is worked with the Ocultar, Jacquard, Fio flutuante, Rede fade-out module.

: With rear sides knitted on all needles, no border processing is entered.

Stoll technical module with border processing for Block Jacquard

Border processing for Block Jacquard in pattern without shape:

: Attention:
If the pattern is saved, then the border processing cannot be undone.
Because of this, save the pattern project under a different name before the border processing or duplicate the design pattern in the pattern project.

  1. Pattern project with a design pattern is created.
  2. Jacquard areas are drawn into the basic pattern.
  3. Jacquard backs are inserted.
    1
    Open the selection list in the Início ribbon under Caixas de diálogo with the button and select Processamento de ourelas para Jacquard de bloco....
    -  or  -
    In the design pattern, select with LMB -> context menu -> Processamento de ourelas -> Processamento de ourelas para Jacquard de bloco....
  1. The Processamento de ourelas para Jacquard de bloco dialog box appears.

Área de procura

The border processing will be entered in the whole pattern

Border processing only in the selected rows

Ocultar ourela do tecido no Jacquard

Display of the knitting element

Selection of the Ocultar, Jacquard, Fio flutuante, Rede technical module for the border processing

: Fade-out module: Knitting technique single jersey

Largura

Desired fade-out width for the border processing in needles

:
Default Setting: 2 Needles wide
the border curls up with a fade-out width bigger than 2 needles.

    2
    Make the desired presets in the dialog box.
    3
    Tap the Aceitar key.
  1. The desired border processing will be entered and displayed in the design pattern.
    2. 4
    After entering all necessary border processings in the design pattern, close the dialog box with .
    5
    If necessary, to view open the Expanded Symbol View.
    6
    Start the Processamento técnico:
    Show symbol view after Technique.
    7
    Generate Sintral.
    8
    Start the Controle Sintral.
    9
    Extrair the knitting program.
  2. A program for the knitting machine will be created.
  3. Load knitting program into the machine.

: The extracted file can be loaded onto the machine with an USB stick or via Ethernet.

Procedure with the pattern creation:

: With this possibility, the border processing can be changed or deleted with easy steps. A square shape in the size of the design pattern is created for this purpose.

  1. Pattern project with a design pattern is created.
  2. Jacquard areas are drawn into the basic pattern.
  3. Jacquard backs are inserted.
    1
    To create a project-related lined shape, select the Cortes tab in the tool window.
    2
    Open the context menu with RMB and select Criar novo corte em tamanho M....
  1. The Novo corte de linhas tool window appears.
    2. 3
    Make the desired entries:
  • Nome de corte : Any
  • Formato de entrada : Stitch
    4
    Confirm with the OK key.
  1. The new lined shape (basic shape) is graphically displayed in the Cortes tab and in a new document window New shape xx [size x] as rectangle.
    2. 5
    To adjust the displayed rectangle to the size of the basic pattern, in the ribbon Edição de corte under Propriedades, click the Tabela de linhas button.
    - or -
    Use the graphic displayed in the New shape xx [size x] document window.
    6
    Open Tabela de linhas in the ribbon.
  2. The table Corte de linhas with the values of the rectangular shape is displayed.
    3. 7
    Adapt the values in the table to the size of the basic pattern.
    8
    Allocate the desired attributes to the shape lines:
  • Fade-out width: Set value to 0, since the different Jacquard areas are not to be hidden with Malha v, com transferência.
    9
    In the New Shape xx [Size x] document window, select the desired shape line with the graphic shape presentation.
    10
    Position cursor on the selected shape line.
    11
    Select LMB -> Propriedades de linha context menu.
  1. The Propriedades de linha tool window is opened for the selected shape line.
    2. 12
    Make the following entries under the para Jacquards (fio flutuante / rede) section:
  • Content: Select Ocultar, Jacquard, Fio flutuante, Rede Fade-out Module.
  • Width: specify the desired fade-out width.
    • Default setting: 2 Needles wide
      Attention: The fade-out width is also executed in the rows of the net pick-up and the net ending.
    13
    In the Cortes tool window select the created shape with LMB.
    14
    Open the context menu -> Posicionar corte -> select Pattern name.
  1. The shape is floating in the selected basic pattern.
    2. 15
    Enable the button of the document window.
    16
    Start the Processamento técnico:
    Show symbol view after Technique.
    17
    Generate Sintral.
    18
    Start the Controle Sintral.
    19
    Extrair the knitting program.
  1. A program for the knitting machine will be created.
  2. Load knitting program into the machine.