Step by Step to 'Pattern-17'

  1. A pattern project with one pattern and the desired settings is created.
    1
    To draw select any desired drawing tool under the Desenhar group.
    2
    In the Cores da amostra tool window, select the desired pattern colors from the Cores de fio color palette (e.g. yarn colors # 3 and # 6) to create the pattern element.
    3
    Draw the desired pattern element in the Amostra de desenho.

Example of Pattern Element

Width: 25 stitches

Height: 20 rows

    4
    Select the height and width of the pattern element.
    5
    Open the context menu and select Seleção -> Criar parte de amostra... .
  1. Pattern element will be saved locally as Partes de amostra.
    2. 6
    Select the pattern element for drawing.
    7
    Draw in the pattern element starting from the third pattern row of the Amostra de desenho.
    : Keep a desired quantity of rows without pattern element (e.g. SJ with yarn color #6) at the end of the basic pattern.
    8
    Select the desired total height of pattern rows for CA#1 (e.g. 114 row) in the Fileira de amostra control column.
    9
    Position the cursor in the pattern area.
    10
    Call up the context menu and select Seleção / Criar um Color Arrangement... .
    -  or  -
    Click directly the button in the ribbon.
  2. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.

Original for 2 Color Arrangements

    11
    Insert the necessary quantity of rows into the executing area.
    12
    Draw-in the needle actions for the structure and transferring into the color segments of the yarn colors #6 (pink) and #3 (blue).
    13
    Make or correct entries in the Números de referência column.
    14
    Make entries to the following control columns:

: The Selecionar máquina dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

    15
    Check the generated Color Arrangement on correct entries with the Verificar button.
    : The knitting procedure cannot be checked!
    16
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aceitar button.

    - or -
    Close the tool window with button.
    17
    Close the prompt with the desired button:
    18
    If necessary, enter the CA#1 via the control column into the desired rows of the design pattern.
    19
    Select the desired height of pattern rows for allocating CA#2 in the Fileira de amostra control column.
    20
    Position the cursor in the pattern area.
    21
    Call up the context menu and select Seleção / Criar um Color Arrangement... .
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.
    2. 22
    Rename the Color Arrangement if necessary.
    23
    Modify the original Color Arrangement CA#2 as follows:

Color Arrangement CA#2 (alternative)

    24
    Check the generated Color Arrangement on correct entries with the Verificar button.
    : The knitting procedure cannot be checked!
    25
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Aceitar button.

    - or -
    Close the tool window with button.
    26
    Close the prompt with the desired button:
    27
    If necessary, enter the CA#2 via the control column into the desired rows of the design pattern.
    : Only enter, if you want to use both CA's within one pattern.
    28
    Click the Guia-fios button under Pré-visualização in the Início ribbon.
  1. The New Pattern xx document window is opened as view and the Guia-fios ribbon appears.
    2. 29
    Open the dialog box via Exibir guia-fios.
    30
    If necessary, make the desired settings for allocating yarn carriers.
    31
    Start the Processamento técnico:
    Show the Vista do tecido após técnica.

Fabric View CA#1 + CA#2

    32
    Generate Sintral.
    33
    Start the Controle Sintral.
    34
    Extrair the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-17.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-17.zip can be loaded onto the machine with an USB stick or via Ethernet.