Step by Step to 'Pattern-17'

  1. A pattern project with one pattern with DJ structure and the desired settings is created.
    1
    To draw select any desired drawing tool under the Desenhar group.
    2
    In the Cores da amostra tool window, select the desired pattern colors from the Cores de fio color palette to draw the motif:
    3
    In Amostra de desenho draw the desired motif.

    : Original without length adjustment by switchable cycles
    4
    In the Fileira de amostra control column, select the first 2 pattern rows of the motif.
    5
    Call up the context menu and select Seleção / Criar um Color Arrangement... .
  1. The Color Arrangement editor appears with the default CA.
    2. 6
    Make the desired changes in the Color Arrangement:

The use of the knitting-in presser foot depends on the carriage direction. And the knitting-in presser foot works always following the knitting system.

Knitting direction to the left

  • Red arrow
    = presser foot unit inactive
  • Orange arrow
    = presser foot unit active
  • Within the carriage stroke to the left, the presser feet work as knitting-in presser feet on the front.
  • The knitting-in presser feet are active following the knitting system.
  • Rear presser feet are inactive.

 

Knitting direction to right

  • Within the carriage stroke to the right, the presser feet work as knitting-in presser feet on the rear.
  • The knitting-in presser feet are active following the knitting system.
  • Front presser foot units are inactive.

Color Arrangement CA#1- Knitting-in the yarn carriers

 

    7
    Check the generated Color Arrangement on correct entries with the Verificar button.
    : The knitting procedure cannot be checked!
    8
    Use the same procedure to create the Color Arrangements for the following pattern rows.

 

CA#2 – Height of the area 1 of the motif

 

CA#3 – Transition from area 1 to area 2 of the motif

 

CA#4 – Position the yarn carriers at the end of the transition.

 

CA#5 – Height of the area 2 of the motif

: This Color Arrangement is not absolutely necessary, as the automatic processing also resolves this area using the 'Intarsia method'.

 

CA#6 – Knitting-out the Yarn Carriers

 

    9
    Draw the desired cycles for length control into the Cycles control column (RS)

 

Screen section before technical processing

 

    10
    If necessary, make the desired settings in the Guia-fios tool window.
    11
    Make the desired presets in the following control columns:
    12
    Carry out all the steps of processing.

: The extracted file "ADF530-32W.Pattern-17.zip" can be loaded onto the machine with an USB stick or via Ethernet.