Working in the View of Yarn Carriers

I. Opening the Yarn Carrier View:

  1. The motive is already created in the Tasarım deseni.
    1
    Open Mekikler.
    Başlat ribbon -> Önizleme -> Mekikler
  1. An additional New Pattern xx document window is opened as Yarn Carrier view and the Mekikler ribbon appears.
    2. 2
    Make the desired settings for the view of Mekikler the status bar:
  1. Tasarım deseni is displayed by yarn colors or magazine colors.

II. Opening the Color Parameter Table:

  1. The New Pattern xx document window is enabled.
  2. The Mekikler ribbon is enabled.
    1
    Open the Mekikler tool window via Mekikleri göster.
  1. The Renk parametreleri table appears inside of the tool window.
  2. Plating colors are displayed.
    3. 2
    Make the desired presettings.

For each color in the pattern color tables used in the design pattern, a color area is created in the color parameter table. This means that you can make presettings only once for this color area.
For pattern related, different changes of a color area sub-colors must be created. You have to draw them manually in the design pattern at the point to be changed. Then, other specifications can be set in the color parameter table.

III. Presettings of the Yarn Carrier Tool Window:

  1. The New Pattern xx document window is enabled.
  2. The Mekikler ribbon is enabled.
    1
    Open the Mekikler tool window via Mekikleri göster.
  1. The Mekikler tool window appears and the yarn carriers for the plating color P1 are displayed undefined in the magazine (center).
    2. 2
    Allocate the yarn carriers to the yarn carrier bars by the Rayları tahsis et button.
    3
    Then select the desired yarn carrier type for the yarn carriers.
    4
    Select the yarn carrier.
    5
    In the right area of the tool window select the desired yarn carrier type via the selection list under Type.
    6
    For the yarn carrier with the allocation of the type Değişken yakalama mesafesi +/- (Ua/b) under Çekiş değeri [mm] enter the values Sol (Ua) and Sağ (Ub).
    7
    Close the Mekikler tool window with .
    - or -
    Select Uygula ve kapat in the Düzenle group.
  1. The New Pattern xx document window will be closed and the presettings applied.