Step by Step to Pattern-3

Apply stitch lengths from knitting element to the control columns when drawing:

Condition:
The knitting element 1x1 Yarım selanik örgü has different stitch length entries in the control columns and as in the basic pattern.

1. Select a knitting element.
2. : The Cursor Attributes window with the currently available attributes appears.
   
2. Via the Kumanda sütunlarını uygula button make the desired setting to draw:
3. - Activated
   Stitch lengths from the knitting element are entered in the control columns.
4. - Deactivated
   Stitch lengths from the knitting element are not entered in the control columns.
3. Draw the knitting element in the design pattern.
4. : The stitch length is present in the control column and is therefore valid for the entire technical row. No Power Tension Setting (NPJ) is created.

Apply stitch lengths from knitting elements exactly to the needles when drawing into the design pattern:

Condition:
In the knitting element 1x1 Yarım selanik örgü there are entered different stitch lengths in the needle actions.

1. Select a knitting element.
2. : The Cursor Attributes window with the currently available attributes appears.
   
2. Via the İlmek uzunluğunu uygula button make the desired setting to draw:
3. - Activated
   Stitch lengths from the knitting element will be applied to the design pattern.
4. - Deactivated
   Stitch lengths from the knitting element will not be applied to the design pattern.
3. Draw the knitting element in the design pattern.
4. : Now there are different stitch lengths available for PTS in a single technical row.

Draw stitch lengths from the table needle-exactly into the design pattern:

Condition:

• In the design pattern there are drawn different structures by areas.
• The standard stitch lengths are entered in the control columns and .

1. In the status bar of the design pattern, switch from Desen rengi to İlmek uzunluğu.
2. Open the selection list in the Başlat ribbon under Parametreler at Araç penceresi and select the İlmek uzunluğu (NP) tool window.
3. : The İlmek uzunluğu (NP) tool window appears.
3. Select the Varsayılan tab.
4. Select the desired stitch lengths with the CTRL key in the and columns additively.
5. : The stitch length for the front and rear needle bed are at the cursor.
5. Draw stitch lengths in the desired structure area needle-exactly into the design pattern.
6. : Now, different stitch lengths for PTS exist in one knitting row.

Insert shape line in a shape element:

: The shape lines are inserted symmetrically with both methods by default.

• In the Line Table:
  Entry of a positive value: Widening and upwards
  Entry of a negative value: Narrowing and down
• Enter the desired values in the last table line with the * symbol. When confirming the input with the Enter key a new table line is inserted.
• Select a row -> open the context menu with RMB -> select Ana satır ekle.
• Select a row -> open the context menu with RMB -> select Önüne satır ekle.
  - or -
  Select Arkasına satır ekle.

: Only in the line table it is possible to create an asymmetrical line shape by deactivating Basamaklamayı yansıt.

• In the document window
• Position the cursor on a line of the displayed graphic -> open the context menu with RMB and select -> Kesim çizgisi ekle .

Changing line properties of a shape line

• Global project-related setting of the line properties via Yapılandırma / Tüm kesimler tab
• In the shape regarding a shape line

Changing curve type:

• In the Line Table
• In the Eğri column open the context menu with the RMB and select the desired curve type.
• Select line -> with the Çizgi özellikleri button open the Çizgi özellikleri and select the desired curve type at Basamaklama akışı
• In the document window
• Position the cursor on a line of the displayed graphic -> open the context menu with RMB and select -> Basamaklama akışını ayarla....
  

1. Select the desired Basamaklama akışı in the selection menu.
   
2. When selecting the curve type diğerleri ile aynı şekilde via·Basamaklamayı değiştir, specify the desired values for Height and Width of the steps.
3. : The window for entering specifications is displayed according to the selected curve type.
3. Transfer the entry to the shape line with the Yeniden hesapla button.
4. : The shape line is displayed in the graphic and in the line table as well.

Possibilities for editing an anchor via the context menu

: Knitting element V-yaka başlangıcı, Çapraz is linked with the marking point of the shape element Neck.

: The knitting sequence when binding-off always depends on the carriage stroke!