Step by Step to 'Pattern-17'

  1. A pattern project with one pattern and the desired settings is created.
    1
    To draw select any desired drawing tool under the Çiz group.
    2
    In the Desen renkleri tool window, select the desired pattern colors from the İplik renkleri color palette (e.g. yarn colors # 3 and # 6) to create the pattern element.
    3
    Draw the desired pattern element in the Tasarım deseni.

Example of Pattern Element

Width: 25 stitches

Height: 20 rows

    4
    Select the height and width of the pattern element.
    5
    Open the context menu and select Seçim -> Desen parçası.
  1. Pattern element will be saved locally as Desen parçası.
    2. 6
    Select the pattern element for drawing.
    7
    Draw in the pattern element starting from the third pattern row of the Tasarım deseni.
    : Keep a desired quantity of rows without pattern element (e.g. SJ with yarn color #6) at the end of the basic pattern.
    8
    Select the desired total height of pattern rows for CA#1 (e.g. 114 row) in the Desen sırası control column.
    9
    Position the cursor in the pattern area.
    10
    Call up the context menu and select Seçimden oluştur / Color Arrangement.
    -  or  -
    Click directly the button in the ribbon.
  2. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.

Original for 2 Color Arrangements

    11
    Insert the necessary quantity of rows into the executing area.
    12
    Draw-in the needle actions for the structure and transferring into the color segments of the yarn colors #6 (pink) and #3 (blue).
    13
    Make or correct entries in the Referans numaraları column.
    14
    Make entries to the following control columns:

: The Makine seç dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

    15
    Check the generated Color Arrangement on correct entries with the Kontrol et button.
    : The knitting procedure cannot be checked!
    16
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Uygula button.

    - or -
    Close the tool window with button.
    17
    Close the prompt with the desired button:
    18
    If necessary, enter the CA#1 via the control column into the desired rows of the design pattern.
    19
    Select the desired height of pattern rows for allocating CA#2 in the Desen sırası control column.
    20
    Position the cursor in the pattern area.
    21
    Call up the context menu and select Seçimden oluştur / Color Arrangement.
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.
    2. 22
    Rename the Color Arrangement if necessary.
    23
    Modify the original Color Arrangement CA#2 as follows:

Color Arrangement CA#2 (alternative)

    24
    Check the generated Color Arrangement on correct entries with the Kontrol et button.
    : The knitting procedure cannot be checked!
    25
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Uygula button.

    - or -
    Close the tool window with button.
    26
    Close the prompt with the desired button:
    27
    If necessary, enter the CA#2 via the control column into the desired rows of the design pattern.
    : Only enter, if you want to use both CA's within one pattern.
    28
    Click the Mekikler button under Önizleme in the Başlat ribbon.
  1. The New Pattern xx document window is opened as view and the Mekikler ribbon appears.
    2. 29
    Open the dialog box via Mekikleri göster.
    30
    If necessary, make the desired settings for allocating yarn carriers.
    31
    Start the Teknik işlem:
    Show the Tekniğe göre örme kumaş görünümü.

Fabric View CA#1 + CA#2

    32
    Generate Sintral.
    33
    Start the Sintral Kontrolü.
    34
    Genişlet the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-17.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-17.zip can be loaded onto the machine with an USB stick or via Ethernet.