Step by Step to 'Pattern-18'

  1. The pattern project Pattern-17 is open.
    1
    Save the pattern under a new name, e.g 'Pattern-18'
    2
    To draw select any desired drawing tool under the Çiz group.
    3
    In the Desen renkleri tool window, select the desired pattern colors of the basic pattern from the İplik renkleri color palette (e.g. yarn colors # 3 and # 6) to create the pattern element for the border at the left and right.
    4
    Draw the left / right border into Tasarım deseni.

Border at the left

Border at the right

    5
    Select the area for the pattern element Border at the left.
    6
    Open the context menu with RMB and select Seçim -> Desen parçası.
  1. Pattern element will be saved locally as Desen parçası.
    2. 7
    Select the pattern element for drawing.
    8
    Draw in the pattern element starting from the third pattern row of the Tasarım deseni up to the end of the basic pattern at the left border.
    : Keep a desired quantity of rows without pattern element (e.g. SJ with yarn color #6) at the end of the basic pattern.
    9
    Select the area for the pattern element Border at the right.
    10
    Open the context menu with RMB and select Seçim -> Desen parçası.
  2. Pattern element will be saved locally as Desen parçası.
    3. 11
    Select the pattern element for drawing.
    12
    Draw in the pattern element starting from the third pattern row of the Tasarım deseni up to the end of the basic pattern at the right border.
    : Keep a desired quantity of rows without pattern element (e.g. yarn color #6 SJ) at the end of the basic pattern.
    13
    Select the desired total height of pattern rows for CA#1 (e.g. 114 row) in the Desen sırası control column.
    14
    Position the cursor in the pattern area.
    15
    Call up the context menu and select Seçimden oluştur / Color Arrangement.
    -  or  -
    Click directly the button in the ribbon.
  3. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.

Original for Color Arrangement

    16
    Insert the necessary quantity of rows into the executing area.
    17
    Draw-in the needle actions for transferring and weft yarn into the color segments of yarn color #3 (blue).
    18
    Check and correct the entries in the Referans numaraları column.
    19
    Make entries to the following control columns:

: The Makine seç dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

Alternative CA#2

Usage of the following needle actions

  • Hazırlık ile öne doğru aktarma / atkı ipliği : Combination of transfer to the rear, weft yarn and transfer to the front

    20
    Check the generated Color Arrangement on correct entries with the Kontrol et button.
    : The knitting procedure cannot be checked!
    21
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Uygula button.
    - or -
    Close the tool window with button.
    22
    Close the prompt with the desired button:
    23
    Enter the generated Color Arrangement CA#1 via the control column into the desired rows of the design pattern.
    24
    Click the Başlat button under Önizleme in the Mekikler ribbon.
  1. The New Pattern xx document window is opened as view and the Mekikler ribbon appears.
    2. 25
    Open the dialog box via Mekikleri göster.
    26
    Select the yarn carrier with yarn color #3.
    27
    Select in the dialog box under Tipi the Atkı ipliği Qw type of yarn carrier.
  2. The yarn carrier will be marked with the icon.
    3. 28
    If necessary or desired, make further settings for allocating yarn carriers.
    29
    Start the Teknik işlem:
    Show the Tekniğe göre örme kumaş görünümü.

Fabric View CA#1 + CA#2

    30
    Generate Sintral.
    31
    Start the Sintral Kontrolü.
    32
    Genişlet the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-18.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-18.zip can be loaded onto the machine with an USB stick or via Ethernet.