Step by Step to 'Pattern-8_2system'

Stoll-ikat plating ®

For Stoll-ikat plating®, two plating colors (= a plating color combination) per pattern row are required for each color change by one system. You can use a different plating color combination in each system. A maximum of 30 changes of position are allowed in one pattern row, where a distance of 2 inches (with 1.0 m/s) between the color changes is to be respected.

  1. A pattern project with the Pattern-8_1system pattern and the desired settings is created.
    1
    Duplicate the Pattern-8_1system pattern.
  1. The plating color P1 and P2 are entered into all pattern rows of the design pattern.
    2. 2
    Draw the plating colors P3 and P4 manually into the second pattern row.

1

The first pattern row contains P1 and P2, which work in the first knitting system.

2

The first pattern row contains P3 and P4, which work in the second knitting system.

    3
    Create a selection based on the combination of plating colors P1 + P3.
    4
    Create a pattern element via the context menu Seçim -> Desen parçası.
    5
    Use the same procedure to create a pattern element with the plating colors P2 + P4.
  1. Two pattern elements are created.

Pattern Element of P1 + P3

Pattern Element of P2 + P4

    6
    Use the drawing function Çizgiyi doldur Sola ve sağa doğru ara with the settings Arka plan rengi and Hassas Kenar to fill the respective areas.
    7
    If desired, modify the value under Döner vanize in the Diğer ayarlar tab of Configuration.

Maximum quantity of needles with separating knitting rows to several systems.

  • Color fields up to 27 needles wide are divided up = inverse plating
  • Color fields wider than 27 needles are not divided up = Stoll-ikat plating®

: The default setting depends on the gauge: = 2 inch minus one needle.

    8
    Draw the plating color P5 into the local knitting element Başlama, 2x2
    9
    Select an existing shape from the Kesimler tool window and place it on the pattern.
    10
    If necessary, make the desired settings in the Mekikler tool window.
    11
    Carry out all the steps of processing.

: Stoll-ikat plating ®
Inverse plating with changing position of the yarn carriers within the same system.
This means that the pattern rows are not separated into technical rows.

: The extracted file "ADF530-32W.Pattern-8_2system.zip" can be loaded onto the machine with an USB stick or via Ethernet.