Context Menu

• Add Horizontal Dimensioning
  Draws a dimensioning with horizontal positioning between two points.
• Add Vertical Dimensioning
  Draws a dimensioning with vertical positioning between two points.
• How to Assign New Dimensionings
• Add Horizontal Control Dimensioning
  Draws a control dimensioning with horizontal positioning between two points.
• Add Vertical Control Dimensioning
  Draws a control dimensioning with vertical positioning between two points.
• How to Create Control Dimensionings
• Add Symmetrical Point
  Adds the mirrored shape point in correspondence to the selected point.
  not with symmetrical shape points
• Align Points Symmetrically
  Aligns two points symmetrically by click on them successively
•  Remove Symmetry
  Cancels the binding to the opposite shape point.
  only with symmetrical shape points
• Set Y Position to Show All Sizes
  only together with  Show All Sizes
• How to Set the Reference Line for the View of All Sizes
• Delete
  Removes the selected shape point.

• Add Symmetrical Shape Points
  Adds a shape point and its mirrored point.
• Add Shape Point
  Adds a shape point.
• How to Insert New Shape Points
• Property Painter
  Copies the properties of a line:
• Stepping Kind
• Attributes of the Line
• Markings of Line
• How to Transfer Line Properties
• Apply Markings to Mirrored Line
  Applies the markings and their properties to the line on the opposite.
  Markings will possibly be removed to keep the opposite line symmetrical.
  only with lines with markings defined by symmetrical shape points.
• Apply Stepping Parameters to All Sizes
  Applies the attributes to this line within each of the size.
  only for shapes having different sizes.
• Apply Markings to All Sizes
  Applies the markings and their properties to this line within each of the sizes.
  Markings will possibly be removed to keep the other sizes corresponding.
  only for shapes having different sizes.
• Line Properties
  Opens the Line Properties dialog box.
  How to Determine Individual Steppings

• Edit
  Opens the direct input of the dimensioning.
  
• Use as Main Dimensioning
  The active dimensioning gets the main dimensioning.
  You can hide all reuses of this dimensioning.
  together with
  The check mark shows the usage as main dimensioning.
• Flip Dimensioning

• Copy Dimensioning
  Copies the active dimensioning for reuse.
• Click on a new startpoint, move the cursor to a new target point and click on the target point.
  
• Delete Dimensioning
  Removes the active dimensioning.
  The corresponding measure is kept in the table.

• Flip Vertically
  Mirrors the fabric piece at the vertical center axis.
  A multiple selection is possible
  Symmetrical fabrics do not differ in the result
• Duplicate
  Makes a copy of the fabric piece and inserts it.
  A multiple selection is possible
  Example: Back (copy)
• Copy and Split
  Copies the fabric piece and separates the left and right polyline to individual fabric pieces.
• Örgü parçalarını birleştir...
  Combines the left and right polyline of individual fabric pieces to one new fabric piece.
  Combine Fabric Piece Halves (dialog box)
• Hide Fabric Piece
  Shows the fabric piece minimized only.
  
  You can show it again by clicking on the window icon.
  Controls of the View
• Delete
  Deletes the fabric piece after prompt.
  A multiple selection is possible
  The query appears in case of multiple selection for each fabric piece individually.
• Rename
  Opens the Name edit box of the fabric piece.
• Overwrite name and quit the edit box.
• Properties
  Opens the Properties of Fabric Piece dialog box.

• Add Symmetrical Marking Points
  Adds a marking point and its mirrored point.
• Add Marking Point
  Adds a marking point.
• How to Insert Markings for Buttons
• Remove Symmetry of All Shape Points
  Cancels symmetry of all shape points and with it of all lines.
• Remove Symmetry of All Marking Points
  Cancels the symmetry of all marking points.
• Create Symmetry
• Create Symmetry of All Shape Points, Left -> Right
  Aligns all the shape points, and with it all lines, of the right side symmetrically to the left side.
  Missing shape points will be added.
  Surplus of shape points will be deleted.
• Create Symmetry of All Shape Points, Right -> Left
  Aligns all the shape points, and with it all lines, of the left side symmetrically to the right side.
  Missing shape points will be added.
  Surplus of shape points will be deleted.
• Create Symmetry of All Marking Points, Left -> Right
  Aligns all the marking points of the right side symmetrically to the left side.
  Missing marking points will be added.
  Surplus of marking points will be deleted.
• Create Symmetry of All Marking Points, Right -> Left
  Aligns all the marking points of the left side symmetrically to the right side.
  Missing marking points will be added.
  Surplus of marking points will be deleted.
• Arka plan resmini örme paneli yükle...
  Opens the Open dialog box in order to select a graphic file.
• Supported formats: *.bmp; *.jpg; *.png.
• Yeni kesim elemanı ekle
  Adds a new shape element to the fabric piece.
  You determine the type and the symmetry of the shape element in the submenu.
• Yaka açıklığı
  Simetrik
  Asimetrik
• Doldurulmuş yaka açıklığı
  Simetrik
  Asimetrik
• Tiktak
  Simetrik
  Asimetrik
• Delik
  Simetrik
  Asimetrik
• Pens
  Simetrik
  Asimetrik
• Şekil dahilinde
  Simetrik
  Asimetrik
• Example
  
• Tüm boyutlandırmayi sil
  Removes all dimensionings from the fabric piece without changing its geometry.

• New Fabric Piece
  Adds a new, not dimensioned fabric piece.
  
• For example: Add the Fabric Pieces for Collar and Armhole Cuff
• Add New Sizes...
  Opens the Add New Sizes dialog box.
  Add New Sizes
• Auto Arrange Fabric Pieces
  Arranges the fabric pieces clearly within the dimensioning view.
  
• Görünüm
• Örgü parçası çerçevesini daima göster
  Shows the frame around the edit box not only with mouse over.
• Başlık çubuğunu daima göster
  Shows the title bar of the edit box not only with mouse over.
• Key combination: J
• Duvar kağıdıni yükle
  Opens the Open dialog box in order to select a graphic file.
• Supported formats: *.bmp; *.jpg; *.png.
• The image in the dimensioning view with title and handles
  
• Continue:
  Context menu Resimden yeni örme paneli oluştur
• Show ToolTip
  Shows information about the object on which the cursor is positioned.
  Key combination: , (Comma)
  

• Yatay boyutlandırma ekle
  Draws a dimensioning with horizontal positioning between two points.
• Dikey boyutlandırma ekle
  Draws a dimensioning with vertical positioning between two points.
• Yatay kontrol boyutlandırması ekle
  Draws a control dimensioning with horizontal positioning between two points
• Dikey kontrol boyutlandırması ekle
  Draws a control dimensioning with vertical positioning between two points.
• Simetrik nokta ekle
  Adds the mirrored marking point in correspondence to the selected point.
  not with symmetrical marking points
• Simetri iptal
  Cancels the binding to the opposite marking point.
  only with symmetrical marking points
• Noktaların hizalamasını kaldır
  Cancels the alignment in vertical or horizontal direction.
  Click the desired points.
• Yeniden düzenle
  Moving the position of the marking point.

• Tüm boyutların gösterimi için Y pozisyonu ayarla
  Only together with Tüm bedenleri göster
  How to Set the Reference Line for the View of All Sizes
• Sil
  Removes the selected marking point.
• Özellikleri aktar
  Copies the properties of the selected marking point by click on it and transfers it to the marking point you click on next.
• How to Define and Transfer Properties of Marking Points
• İşaret noktası özellikleri
  Opens the Marking Point Properties tool window.
  = tool window is open.

Remove Start of Knitting

• Removes all settings concerning the start
• Knitting elements and other options
• Stitch Density
• Knitting Elements for Doubling
• Shape points and dimensions will be kept

• Duplicate
  Makes a copy of the shape element and inserts it.
• Flip Vertically
  Mirrors the shape element at the vertical center axis.
• Flip Horizontally
  Mirrors the shape element at the horizontal center axis.

• Delete
  Deletes the shape element without prompt.
• Properties
  Opens the Shape Element Properties dialog box for the active shape element.
  Shape Element Properties