Pattern Parameters

Call up the 起头 tab -> 参数 group -> Pattern Parameters button.

Select the section where you want to make the settings.

Depending on the properties of the selected machine, different sections are available.

The different tabs of the selected section will be displayed.

项目
Filtering Pattern Parameters

Open Second View
Opens a second view of the Pattern Parameters .

The following sections are available in the Pattern Parameters dialog box:

牵拉	显示WM-值表。 Take-down (Pattern Parameters)
导纱器	显示直接和间接导纱器修正YC/YCI值表。 Yarn Carriers (Pattern Parameters)
线圈长度	显示NP值表。 Stitch Lengths (Pattern Parameters)
速度	显示MSEC值表。 Speed (Pattern Parameters)
行循环	Show the table with row cycles. Row Cycles (Pattern Parameters)
Column Cycles	Show the table with column cycles. Column Cycles (pattern parameters)
横移	显示横移修正（VCI）。 Racking (Pattern Parameters)
压脚	Display table with correction values for presser feet. Presser Feet (Pattern Parameters) This tab only appears if a machine with presser feet is selected.
送纱器	Display the table with the settings of the feed wheels. Feed Wheels (Pattern Parameters) This tab only appears when an electronic feed wheel was selected in the 配置 dialog box, in the 机器属性 tab.
纱线长度	Display the table with the settings for the measuring wheels. Yarn Lengths (Pattern Parameters)
注释	Enter a comment to the Setup entries. Comments (Pattern Parameters)
Sintral	Show the table of Sintral functions and instructions. Function call Sintral Instruction / PRINT Sintral Function
Needle Bed Distance	Show the Needle Bed Distance table. Needle Bed Distance This tab only appears FLEX series of ADF machines.
线圈密度	Show stitch density table. Stitch Density