Step by Step to Training Pattern

    1
    Creating a pattern project with one pattern and the desired settings.
    2
    To draw select any desired drawing tool under the 绘图工具 group.
    3
    In the 花型颜色 tool window select the desired pattern color from the 纱线颜色 color palette:
  • 库颜色
    • : The yarn carriers are not automatically placed on the yarn carrier rails.
      The yarn carrier home position is determined in the 工艺处理.
  • 工艺颜色 (do not use to create a design pattern)
    • : Yarn carriers are automatically placed on the yarn carrier rails due to STOLL default settings and are taken into account during the determination of the yarn carrier home position during the 工艺处理.
  • 导纱器颜色
    • : Yarn carriers are automatically assigned to a yarn carrier rail and remain unchanged during the determination of the yarn carrier home position during the 工艺处理.
  • 删除颜色
  • 添纱颜色
  • 多系统颜色
    For multi-system knitting

For drawing the design pattern, with it several yarn carriers may be necessary for each yarn color.

  • Bobbin with color
    Not used within design pattern
  • Bobbin with color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail. Yarn carrier home position can be determined automatically.

For drawing the design pattern, with it one yarn carrier is used for each magazine color.

  • Magazine Color
    Not used within design pattern
  • Magazine Color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail.
Yarn carrier home position can be determined.

Recommendation!

Draw the design pattern by yarn colors or magazine colors in order to get common yarn carrier home positions (order related data) for all the pattern within the order.

For drawing the design pattern, with a yarn carrier already positioned on the corresponding rail for each yarn carrier color in use.

Result:
The yarn carrier home position is already specified when drawing with yarn carrier colors.

: You can change a yarn carrier home position by re-drawing with another yarn carrier color or by the 更换导纱器颜色 dialog box.

工艺颜色 for creating or changing technical modules.

  • Starts
  • Picking-up after pressing-off
  • etc.
    4
    Draw the motif with the desired yarn color.

: When drawing the motif pay attention if necessary to even numbered heights of the color areas!

    5
    Click the 起头 button under 预览 in the 导纱器 ribbon.
  1. The New Pattern xx document window is opened as view and the 导纱器 ribbon appears.
    2. 6
    Open the 导纱器 tool window.
    In 导纱器 group -> 显示导纱器
  2. The 导纱器 tool window appears with the 可用的纱线和导纱器 tab active.

:
For each color in the pattern color tables used in the design pattern, a color area is created in the color parameter table. This means that you can make only one preset for this color area.
For pattern related, different changes of a color area sub-colors must be created. You have to draw them manually in the design pattern at the point to be changed. Then, other specifications can be set in the color parameter table.

Structure and column headers of the 颜色参数 table:

Group 1: General / Table header:

  • 1st row:
    All the symbols identifying the table columns
  • 2nd Row 'D'
    Default settings for the respective column
    Settings from the STOLL file - cannot be modified at the moment

: Default settings are applied from a STOLL file and cannot be modified at the moment.
These are automatically applied to all colors without specifications.

Group 1: General

1. Column

Entry D for the definition of the 2nd row of the table
(D = Default settings for the table columns)

2. Column

Display for available sub-colors

颜色

Display of all the colors used in a project

  • Symbol and color:
    Not visible but used within the design pattern.
  • Symbol and color + :
    Visible and used within the design pattern.

: The symbols are depending on the pattern color table they are origin.

导纱器编织一个多系统颜色

Specifications with multi-system knitting

导纱器编织一个添纱颜色

Specifications with plating

摆动

Settings for the swivelling of intarsia yarn carriers or of autarkic yarn carriers

Quantity of pattern rows for knitting-out, SEN edge and clamping
Define the distance from the end of the color field to the knitting-out, to the shifting to SEN edge or to the clamping.

Specify the maximum distance between the color fields of the yarn carrier.
If this value is exceeded, one of the intended actions will take place:

  • Knitting-out the yarn carrier
  • Move the yarn carrier to the SEN border
  • Clamp Yarn Carrier

Group 2: Knitting-in

开始方向

Specification of the knitting direction for the first row of a color (color area)

无编织带入列数

Quantity of columns (needles) without Knitting-In module

编织带入模块

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

编织带入重复宽度

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

移动脱布行

Column appears automatically if a module for knitting-in with casting-off is used

编织带入的行偏移

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • 花型行
      Default Setting
    • 工艺行
  • 在一个额外行

起头处锁定或打结

Presetting a module for knot / binding at start of a color area without / with knitting-in.

打结编织带入的列偏移

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Group 3: Knitting-out

编织带出方向

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

编织带出模块

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:
Example

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

编织带出重复宽度

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

移动脱布行

Column appears automatically if a module for knitting-out with casting-off is used

编织带出的行偏移

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • 花型行
      Default Setting
    • 工艺行
  • 在一个额外行

结束处锁定或打结

Presetting a module for knot / binding at end of a color area without or with knitting-out.

打结编织带出的列偏移

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the 结束处锁定或打结 column.

Group 4 : Intarsia Binding

左侧嵌花锁定

Presetting of a binding or no binding at the left border of the color area

右侧嵌花锁定

Presetting of a binding or no binding at the right border of the color area

左侧嵌花锁定方向

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • 编织带入加锁定
    Binding at the left at the beginning of a knitting row
  • 编织带出加锁定
    Binding at the left at the end of a knitting row

右侧嵌花锁定方向

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • 编织带入加锁定
    Binding at the right at the beginning of a knitting row
  • 编织带出加锁定
    Binding at the right at the end of a knitting row

左侧嵌花锁定模块

Presetting of the knitting mode for binding at the left border of the color area

右侧嵌花锁定模块

Presetting of the knitting mode for binding at the right border of the color area

Group 5: Border Processing

左侧无边界处理的允许收放针

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

右侧无边界处理的允许收放针

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

左侧边界处理模块

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the 左侧无边界处理的允许收放针 column.

右侧边界处理模块

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the 右侧无边界处理的允许收放针 column.

    7
    Carry out 工艺 处理 if necessary.

: After carrying out the 工艺 处理 you are able to view and weigh up the automatic processing, if corrections / optimizations are necessary.

    8
    Back to the 设计花型 to make pattern-related changes.
    9
    Open the 导纱器 tool window again for this purpose.
    10
    Make the desired changes in the following groups:

Explanation 'Knitting-in':

The yarn carrier is at the fabric selvedge and must be brought into the fabric to knit at the beginning of its color field.

  • Default setting: Using Intarsia yarn carriers (swivelling)
  • To knit-in the yarn carriers there are different technical modules available in the 编织资源管理器.
  • For knitting-in the yarn carriers from the fabric selvedge, the shortest distance (way) to the color field is always used by default.
    : Regarding the knitting technique, many options are available.
  • If there are various color areas of the same color available in the design pattern, then the yarn carrier is knitted-out at the end of the color area and then knitted-in again from its last position.

Example with the 编织带入 集圈-浮线，锁定 集圈 technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-in

开始方向

Specification of the knitting direction for the first row of a color (color area)

无编织带入列数

Quantity of columns (needles) without Knitting-In module

编织带入模块

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

编织带入重复宽度

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

移动脱布行

Column appears automatically if a module for knitting-in with casting-off is used

编织带入的行偏移

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • 花型行
      Default Setting
    • 工艺行
  • 在一个额外行

起头处锁定或打结

Presetting a module for knot / binding at start of a color area without knitting-in.

: Entry in Intarsia color areas.

打结编织带入的列偏移

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Direction of knitting-in yarn carriers:

The knitting-in direction of a yarn carrier is specified by the home position of the yarn carriers.

  • Yarn carrier is on the left side in the clamping and cutting device -> the yarn carrier is knitted from the left to the fabric selvedge.
  • Yarn carrier is on the right side in the clamping and cutting device -> the yarn carrier is knitted from the right to the fabric selvedge.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Two possibilities in the 导纱器 tool window:

  • In the magazine move the yarn carrier manually from 'undefined' to the desired side (left / right) of the magazine.

Automatic

Manually

Yarn carriers are positioned by default in the 'undefined' area in the magazine.

Result:
Yarn carriers are automatically placed on the yarn carrier rails during the technical processing and the yarn carrier home position is determined from it.

Rule:
The yarn carrier is placed on the side in the yarn carrier home position, where the yarn carrier has the shortest distance from their color field to the fabric selvedge.

Place the yarn carrier manually with LMB to the left or right in the magazine.

Result:
Yarn carriers are placed on the yarn carrier rails during the technical processing according to the positioning in the magazine. The yarn carrier home position is determined from it.

: The path for the knitting-in to the color field may be lengthened due to the manual moving.

  • Move the yarn carriers allocated to the yarn carrier rails to the desired rail side.

Example 1

Example 2

1

Yarn carrier on the right side of the yarn carrier rails

Yarn carrier 3A right was manually moved to the left side.

: When using yarn colors; it is also possible to move the yarn carrier to a different rail number.

2

Yarn carrier on the left side of the yarn carrier rails

:

  • Yarn carriers placed on the left side ((2)) are knit-in from the left.
  • Yarn carriers placed on the right side ((1)) are knit-in from the right.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Preset in 开始方向 column:

The following Intarsia process is used by default for the processing with the 工艺处理.

: This even processing results in a beautiful, even fabric image with the highest machine run time, which is why the yarn carriers are also grouped. This way the run time is reduced.

开始方向 column:

  • To change the knitting direction of the first stitch row of a color field
    : The change influences the 'even' Intarsia processing.

Preset with 无编织带入列数:

无编织带入列数 column:

A

Distance of the color field from the fabric selvedge in needles (columns), where no module is entered to be knit-in.

  • A ≥ value:
    Technical module for knitting-in is entered.
  • A < value:
    No technical module for knitting-in

Preset in 编织带入模块 and 编织带入重复宽度 column:

  • These two columns work together.
    If a corresponding module is selected in the 编织带入模块 column, then the 编织带入重复宽度 column is active or displayed.
  • The technical module for knitting-in consists of 2 pieces of information:
    • Binding
    • Repetition

Example

1

Binding

2

Repetition

Selection of the desired technical module for the knitting-in

Example: 编织带入 集圈-浮线，锁定 集圈

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 4

Preset in 移动脱布行 column:

  • The 编织带入重复宽度 column and the 移动脱布行 column are active, if in the 编织带入模块 column a corresponding knitting-in module with casting-off is selected.
  • The technical module for knitting-in with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

Example

1

Binding

2

Repetition

3

Number of pattern rows for the cast-off

Selection of the desired technical module for the knitting-in

Example: 集圈和脱圈，编织带入

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows the tuck is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in 编织带入的行偏移 column:

编织带入的行偏移 column to move the knit-in row.

Standard behavior when knitting-in a yarn carrier to their color field

Use of the column
编织带入的行偏移

Yarn carriers are knit-in by default in the first knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-in 2 pattern rows before the start of the color field.

: The yarn carrier is located in the fabric until the color area begins to be knitted.
Recommendation: Using Intarsia yarn carriers.

Preset in 起头处锁定或打结 and 打结编织带入的列偏移 column:

These two columns work together, which means that if a corresponding module is selected in the 起头处锁定或打结 column, then the 打结编织带入的列偏移 column is active or displayed.

Example without column offset (default)

1

Module for the knitting-in

2

Selection e.g. of the 打结，集圈，开始，编织带入 module

No entry in this 打结编织带入的列偏移 column

Example with column offset

1

Module for the knitting-in

2

Selection of the 打结，集圈，开始，编织带入 module

Entry of a value in this 打结编织带入的列偏移 column

Example: -2

Explanation 'Knitting-out':

At the end of a color area, the yarn carrier is brought from the fabric to the fabric selvedge (knitted-out).

  • To knit-out the yarn carriers there are different technical modules available in the 编织资源管理器.
  • The knitting-out (direction) of the yarn carriers is entered into the pattern according to the following points:
    • Pattern structure
    • Even Intarsia procedure
    • Yarn carrier positions

Example with the 编织带出 集圈-浮线，锁定 集圈 technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-out

编织带出方向

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

Quantity of Pattern Rows for Knitting-out

Preset of the distance of color areas from which on knitting-out starts.

编织带出模块

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

编织带出重复宽度

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

移动脱布行

Column appears automatically if a module for knitting-out with casting-off is used

编织带出的行偏移

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • 花型行
      Default Setting
    • 工艺行
  • 在一个额外行

结束处锁定或打结

Presetting a module for knot / binding at end of a color area.

: Entry in Intarsia color areas.

打结编织带出的列偏移

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the 结束处锁定或打结 column.

Preset in 编织带出方向 column:

: With the 工艺 处理, the yarn carriers are calculated and knitted-out automatically according to the pattern.

  • 编织带出方向 column, to manually influence the automatic calculation of the knitting-out.

: The manual change of the direction of the knitting-out of a color field influences the processing of the following pattern rows in the basic pattern.

Preset with Quantity of Pattern Rows for Knitting-out:

Quantity of pattern rows for knitting-out, SEN edge and clamping column in group 1 - General

A

Preset of a distance between two color fields of a yarn carrier in pattern rows

Default setting (A) 3 (pattern rows)

Result:

  • Distance A < 3:
    At the end of the first color area no knitting-out is entered and therefore no knitting-in for the second color area. The yarn carrier stops in the fabric.
    : The use of Intarsia yarn carriers is recommended for this.
  • Distance A ≥ 3:
    At the end of the first color area a 'Knitting-out' technical module is entered and therefore also a 'Knitting-in' technical module for the second color area.
    The yarn carrier is positioned at the fabric selvedge.

Preset in 编织带出模块 and 编织带出重复宽度 column:

  • These two columns work together.
    If a corresponding module is selected in the 编织带出模块 column, then the 编织带出重复宽度 column is active or displayed.
  • The technical module for knitting-out consists of 2 pieces of information:
    • Binding
    • Repetition

: The behavior of the 'Knitting-out' technical modules is identical with the behavior of the 'Knitting-in' technical modules.

Selection of the desired technical module for the knitting-out

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.
Example: 4

Preset in 移动脱布行 column when knitting-out:

  • The 编织带出重复宽度 column and the 移动脱布行 column are active, if in the 编织带出模块 column a corresponding knitting-out module with casting-off is selected.
  • The technical module for knitting-out with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

: The behavior of the 'Knitting-out with casting-off' technical module is identical with the behavior of the 'Knitting-in with casting-off' technical module.

Selection of the desired technical module for the knitting-out

Example: 集圈和脱圈，编织带出

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in 编织带出的行偏移 column:

编织带出的行偏移 column to move the knit-out row.

Standard behavior when knitting-out a yarn carrier from their color field

Use of the column

编织带出的行偏移

Yarn carriers are knit-out by default in the last knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-out 2 pattern rows after the end of the color field.

: The yarn carrier is located at the end of the color area until the knitting-out in the fabric.
Recommendation: Use Intarsia yarn carriers.

Preset in 结束处锁定或打结 and 打结编织带出的列偏移 column:

These two columns work together, which means that if a corresponding module is selected in the 结束处锁定或打结 column, then the 打结编织带出的列偏移 column is active or displayed.

Example without column offset (default)

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

12

Module for Knitting-out

2

Selection of the 打结，集圈，结束 module

No entry in the 打结编织带出的列偏移

Example with column offset

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

13

Module for Knitting-out

2

Selection of the 打结，集圈，结束 module

Entry of a value in the 打结编织带出的列偏移 column

Example: -2

Explanation 'Intarsia Binding':

Two neighboring knitting areas (color areas) are connected with each other, with the help of the 'Intarsia Binding'.

  • For the Intarsia binding there are different technical modules available in the 编织资源管理器.
  • Each color area has a left border and a right border, that can be edited independently from one another.
  • The Intarsia binding is entered corresponding to the carriage direction.

Intarsia Binding

左侧嵌花锁定

Presetting of a binding or no binding at the left border of the color area

右侧嵌花锁定

Presetting of a binding or no binding at the right border of the color area

左侧嵌花锁定方向

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • 编织带入加锁定
    Binding at the left at the beginning of a knitting row
  • 编织带出加锁定
    Binding at the left at the end of a knitting row

右侧嵌花锁定方向

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • 编织带入加锁定
    Binding at the right at the beginning of a knitting row
  • 编织带出加锁定
    Binding at the right at the end of a knitting row

左侧嵌花锁定模块

Presetting of the knitting mode for binding at the left border of the color area

右侧嵌花锁定模块

Presetting of the knitting mode for binding at the right border of the color area

'Intarsia Binding at the Left' for the left selvedge of a color field:

Connection at the left selvedge of a color field to their neighboring left color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the 前板集圈，嵌花锁定 module.

Use of the 左侧嵌花锁定 column to make the following settings:

  • 锁定启用 : a Intarsia binding at the left of the color field edge will be entered
  • 锁定关闭 : no Intarsia binding at the left of the color field edge will be entered
  • 自动 : Default Setting
  • 默认 : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

锁定启用

At the left selvedge of the color field ((2)) a Intarsia binding is entered.

锁定关闭

NO Intarsia binding is entered at the left selvedge of the color field ((2)).

'Intarsia Binding at the Right' for the right selvedge of a color field:

Connection at the right selvedge of a color field to their neighboring right color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the 前板集圈，嵌花锁定 module.

Use of the 右侧嵌花锁定 column to make the following settings:

  • 锁定启用 : a Intarsia binding at the right will be entered
  • 锁定关闭 : no Intarsia binding at the right will be entered
  • 自动 : Default Setting
  • 默认 : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

锁定启用

At the right selvedge of the color field ((1)) a Intarsia binding is entered.

锁定关闭

At the right selvedge of the color field ((1)) NO Intarsia binding is entered.

Example: NO Intarsia binding between two color fields

: The Intarsia binding at the right and left was turned off in all color fields. This way a vertical opening results.

左侧嵌花锁定方向 for the left selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

左侧嵌花锁定方向 column

编织带入加锁定

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

编织带出加锁定

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

默认

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

'Direction of the Intarsia Binding at the Right' for the right selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

右侧嵌花锁定方向 column

编织带出加锁定

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

编织带入加锁定

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

默认

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Preset in 'Module for Intarsia Binding at the Left' and 'Module for Intarsia Binding at the Right' column:

  • For the Intarsia binding there are different technical modules available in the 编织资源管理器.
    • Binding with tuck
    • Binding with stitch
    • No binding (= vertical opening)
  • Column 左侧嵌花锁定模块:
    Selection of the module to be used at the left border of the color field
  • 右侧嵌花锁定模块 column.
    Selection of the module to be used at the right border of the color field
  • Variable module allocation at the left and right color field border

: Combination possibilities of the different bindings:
There are many options how the types of bindings at the color field selvedges
can be combined, where the right and left color field selvedge may also
differ from one another.

Example: Module 前板集圈，嵌花锁定 (Standard)
  • Light blue marking:
    Intarsia Binding at the Left: Tuck
  • Light green marking:
    Intarsia Binding at the right: Tuck

: Tuck binding is not visible on the front side of the fabric.

Example: Module 前板线圈，嵌花锁定

  • Light blue marking:
    Intarsia Binding at the Left: Stitch
  • Light green marking:
    Intarsia Binding at the right: Stitch

: Stitch binding is visible on the front side of the fabric.

Front Side of Fabric

Explanation 'Border Processing':

The concept 'Border processing' describes the processing of the steps at the left / right border of a color area (edge) depending on the carriage stroke direction. The yarn carrier is positioned according to the shape for the following knitting row, with the help of the border processing.

  • For the 边界处理 there are different technical modules available in the 编织资源管理器.
    • Feed:
      The concept 'Feed' describes the positioning of a yarn carrier regarding the following knitting row of its own color field. For this, there are different options regarding the knitting technique.
  • Each color area can be edited differently at the left / at the right.
  • The modules are entered according to the carriage direction.

Group: Border Processing

左侧无边界处理的允许收放针

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

右侧无边界处理的允许收放针

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

左侧边界处理模块

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the 左侧无边界处理的允许收放针 column.

右侧边界处理模块

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the 右侧无边界处理的允许收放针 column.

左侧无边界处理的允许收放针 and 右侧无边界处理的允许收放针 for the borders of a color field:

'Allowed stepping' describes the number of needles, where the module for the border processing is not entered.

: Default value with 'allowed stepping' at the left and right is 1 needle.

  • 左侧无边界处理的允许收放针
  • 右侧无边界处理的允许收放针

Examples
右侧无边界处理的允许收放针

Allowed stepping: 1 needle (standard)

Allowed stepping: 2 needles

Allowed stepping: ≥ 3 needles

:

The yarn carrier is kicked and then with the module for knitting-in is fed to the following knitting row.

Selection 左侧边界处理模块 and 右侧边界处理模块 for the borders of a color field:

For the border processing of a color area there are different knitting techniques available as technical modules.

: The 集圈，--v--，边界处理 technical module is used by default.

  • 左侧边界处理模块
  • 右侧边界处理模块

Examples for 右侧边界处理模块

14

Border processing in the carriage stroke from right to left

2

Border processing in the carriage stroke from left to right

Black marking = Intarsia binding

About the procedure based on the technical module for border processing at the right 集圈，--v--，边界处理

A

The information is entered 1 time each at the start and end of the knitting row

B

The information is entered x times according to the step width.

: The entire steps width minus 2x area width (A) minus preset under 右侧无边界处理的允许收放针 (C) = rest of the step width. This rest is now filled up with area width (B).

C

The information is entered x times according to the preset under 右侧无边界处理的允许收放针.

    11
    Start Technical Processing:
    12
    Generate Sintral.
    13
    Start the Sintral 检验.
    14
    提取 the knitting program.
  1. A program for the knitting machine will be created: CMS530. Exercise_Pattern.zip.
  2. Load knitting program into the machine.

: The extracted file "CMS530.Exercise_Pattern.zip" can be loaded onto the machine with an USB stick or via Ethernet.