Further possibilities for the processing of Intarsia patterns over corresponding control columns

Pattern related settings in the following control columns:

导纱器交错排列（YD）/（YDI） control column:

Automatic staggering at the fabric selvedge YDopt
: Default setting in the control column.
Manual staggering at the fabric selvedge YD / YDI

Working with YDopt (default setting):

The technical processing determines optimized parking positions at the fabric selvedge. Frequently used yarn carriers are positioned as close as possible to the fabric selvedge less used somewhat distant.

1: In the ribbon over 配置 open the dialog box.

2: Select the 优化 tab.

3: Make the desired settings under 导纱器到布边距离（YD）:

第一个导纱器距离的 [1/16英寸]
距布边距离的 [1/16英寸]

按行优化 YD （YDopt）		Automatic yarn carrier staggering is activated. (default setting) : Yarn carriers are staggered automatically at the fabric selvedge according to specifications.
		Automatic yarn carrier staggering is disabled. Yarn carriers are manually staggered according to the specifications in the 导纱器交错排列（YD）/（YDI） control column. Default setting: Usage of YD
第一个导纱器距离的 [1/16英寸]			Distance of the first stopped yarn carrier from fabric selvedge Default value: 1.0 Value range 0 - 20 [1/16 inch]
距布边距离的 [1/16英寸]			Distance of the following stopped yarn carriers Default value: 6.0 Value range 1-20 [1/16 inch]

Working with YD / YDI in the control column:

Pattern is displayed as design pattern.
In the 配置 dialog box / 优化 tab, 按行优化 YD （YDopt） is disabled.
The 导纱器交错排列（YD）/（YDI） control column is displayed.
Default setting: Use of values from the YD table

1: Place the cursor in the control column.

2: Open the context menu with RMB.

The context menu is displayed.

		YD	Standard entry in the control column: Table with Stoll default values for a yarn carrier staggering process at the fabric selvedge : The values can be modified.
		YDI	Indirect tables for the yarn carrier staggering process YDI (I= Index) : YDIn: n = 1-20 3 tables (YDI1- YDI3) are predefined by Stoll with a yarn carrier staggering. Further yarn carrier staggerings YDI can be saved in the table.
	Default		Reset entry to the default entry : See preset in the table header of the control column.
	删除		Delete entry (Don't care) : In these technical rows, no YD / YDI is defined, which means that Don't care is used. This means that the last yarn carrier staggering used is applied by the technical processing.
	在表中显示		The position of the cursor in the control column determines in the context menu which table entry is selected and displayed in the table.

3: Select the desired YDI Index from the context menu.

4: Enter the selection from the control column in the desired pattern areas.

5: Start Technical Processing

6: Then open the symbol view after technical processing with the button.

7: Select 显示导纱器 in the status bar.

The yarn carrier staggering and yarn carrier paths are displayed

Create private YDI table:

Pattern is displayed as design pattern.
In the 配置 dialog box / 优化 tab, 按行优化 YD （YDopt） is disabled.

8: Place the cursor in the control column.

9: Open the context menu with RMB.

The context menu is displayed.

10: Select 在表中显示 in the context menu.

Setup Data dialog box, 导纱器 section is opened.


1	导纱器交错排列（YD）/（YDI）	Tab in the 导纱器 section for settings YD YDI
2	4 YDI+YDI 5	Table entries without specifications for yarn carrier staggering : Use to create private yarn carrier staggering
3	*	Over marked rows (*) it is possible to insert new rows in the table, to define further private yarn carrier staggerings.
4	Slider	Input options for values for the yarn carrier staggering
4		Input options for values for the yarn carrier staggering

11: Use an existing entry.
- or -
Create a new entry in the table.

12: Set the values for the yarn carrier staggering in the graphic using the sliders or the edit box.

13: Close the dialog box.

Entries are saved and can be entered into the control column.

导纱器修正 (YC / YCI) control column:

Yarn carrier correction for yarn carriers in the fabric YC
: Default setting: Entry YC in the control column in the entire pattern.
This YC entry contains a table with all the yarn carriers used in the pattern without a correction value.
Manual yarn carrier correction in the fabric YCI

Working with YC / YCI in the control column:

Pattern is displayed as design pattern.
The 导纱器修正 (YC / YCI) control column is displayed.
Default setting: Use of values from the YC table

1: Place the cursor in the control column.

2: Open the context menu with RMB.

The context menu is displayed.

		YC	Standard entry in the control column: Table for YC contains all yarn carriers used in the pattern without correction values. : Values can be defined at the machine.
		YCI	Indirect tables for the yarn carrier correction YCI (I= Index) : YCIn: n = 1-20 5 tables (YCI1- YCI5) without correction values are saved as favorites. The fields in the table are empty (=Don't Care), which means that if no value is entered, then the value from the previous yarn carrier correction is kept. Further tables for yarn carrier correction values YCI can be added. YCI19 table: Yarn Carrier Correction for 编织带入和带出，集圈 : Only with ADF machines: Knitting-in with Intarsia with Tuck YCI20 table: Yarn Carrier Correction for 编织带入和带出，添纱 : Better catching of the plating yarn by the presser foot
	Default		Reset entry to the default entry : See preset in the table header of the control column.
	删除		Delete entry (Don't care) : In these technical rows, no YC / YCI is defined, which means that Don't care is used. This means that the last yarn carrier correction values used are applied by the technical processing.
	在表中显示		The position of the cursor in the control column determines in the context menu which table entry is selected and displayed in the table.

3: Select the desired YCI Index from the context menu.

4: Enter the selection from the control column in the desired pattern areas.

5: Start Technical Processing

6: Then open the symbol view after technical processing with the button.

7: Select 显示导纱器 in the status bar.

The yarn carrier staggering and yarn carrier paths with yarn carrier corrections are displayed

Create private YCI table:

Pattern is displayed as design pattern.

8: Place the cursor in the control column.

9: Open the context menu with RMB.

The context menu is displayed.

10: Select 在表中显示 in the context menu.

Setup Data dialog box, 导纱器 section is opened.


1	导纱器修正 (YC / YCI)	Tab in the 导纱器 section for settings YC YCI
2	YCI 1 - YCI 5	Table entries without specifications for yarn carrier corrections : Use to create private yarn carrier corrections at the machine
3	*	Over marked rows (*) it is possible to insert new rows in the table, to define further private yarn carrier corrections.
4		Input options for values for the yarn carrier corrections
A	Contents of the selected table entry YC / YCI	YC: All yarn carriers from the pattern have the 0.00 correction value YCI1-YCI20: all yarn carriers from the pattern have 'Don't Care'. Enter values only if the yarn carrier correction should be different from the previous value.

11: Use an existing entry.
- or -
Create a new entry in the table.

12: Set the values for the yarn carrier staggering in the graphic using the sliders or the edit box.

13: Close the dialog box.

Entries are saved and can be entered into the control column.

导纱器预设置 control column:

摆动 : all yarn carriers of a technical row are swiveled
不摆动 : all yarn carriers of a technical row are not swiveled

嵌花锁定 control column:

启用嵌花锁定 : Intarsia binding is entered in the technical row for all color areas (standard)
关闭嵌花锁定 : Intarsia binding is not entered in the technical row for all color areas

编织带出 control column:

编织带出 : all yarn carriers of a technical row are knitted-out (standard)
无编织带出 : all yarn carriers of a technical row are not knitted-out.
: The yarn carriers stop in the fabric! The yarn carriers are knitted-out with the YG-Home function at the end of the fabric.
Recommended: Use Intarsia yarn carriers