Step by Step to 'Pattern-16'

  1. A pattern project with one pattern and the desired settings is created.
    1
    To draw select any desired drawing tool under the 绘图 group.
    2
    In the 花型颜色 tool window, select the desired pattern colors from the 纱线颜色 color palette to draw-in the border.
    3
    Draw-in the border with the desired width and yarn color (# 6 e.g.) into the 设计花型.

2

CA#1

DJ structure with weft yarn

  • Border at left and right of one needle each

3

CA#2:

Moss stitch structure with weft yarn

  • Border at left and right of two needles each

4

CA#3:

2x2 structure with weft yarn

  • Border at left and right of two needles each

    4
    Select the total height of pattern rows for CA#1 in the 花型行 control column.
    5
    Position the cursor in the pattern area.
    6
    Call up the context menu and select 选择 / 颜色排列.
    -  or  -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor with the original standard knitting process of the 2 pattern rows is opened.

Original for all 3 Color Arrangements

    7
    Add the necessary quantity of columns to the color segment of yarn color #31 in the original CA#1.
    8
    Insert the necessary quantity of rows into the executing area.
    9
    Draw-in the needle actions for the structure into the color segments of the yarn colors #6 (pink) and #31 (yellow).
    10
    Correct the entries in the 基准号码 column.
    11
    Make entries to the following control columns:

: The 选择机器 dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

    12
    Check the generated Color Arrangement on correct entries with the 检验 button.
    : The knitting procedure cannot be checked!
    13
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the 应用 button.

    - or -
    Close the tool window with button.
    14
    Close the prompt with the desired button:
    15
    Enter the Color Arrangement via the control column into the desired rows of the design pattern.
    16
    Select the total height of pattern rows for CA#2 in the 花型行 control column.
    17
    Position the cursor in the pattern area.
    18
    Call up the context menu and select 选择 / 颜色排列.
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor with the original 'default knitting process' for the 2 selected pattern rows is opened.
    2. 19
    Rename the Color Arrangement if necessary.
    20
    Modify the original Color Arrangement CA#2 as follows:

Color Arrangement CA #2

    21
    Check the generated Color Arrangement on correct entries with the 检验 button.
    : The knitting procedure cannot be checked!
    22
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the 应用 button.

    - or -
    Close the tool window with button.
    23
    Close the prompt with the desired button:
    24
    Enter the Color Arrangement CA#2 via the control column into the desired rows of the design pattern.
    25
    Select the total height of pattern rows for CA#3 in the 花型行 control column.
    26
    Position the cursor in the pattern area.
    27
    Call up the context menu and select 选择 / 颜色排列.
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor with the original standard knitting process of the 2 pattern rows is opened.
    2. 28
    Rename the Color Arrangement if necessary.
    29
    Modify the original CA#3 as follows:

Color Arrangement CA #3

    30
    Check the generated Color Arrangement on correct entries with the 检验 button.
    : The knitting procedure cannot be checked!
    31
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the 应用 button.

    -  or  -
    Close the tool window with button.
    32
    Close the prompt with the desired button:
    33
    Enter the Color Arrangement CA#3 via the control column into the desired rows of the design pattern.
    34
    If necessary, define a cycle in order to extend the structures of the 3 pattern areas via the 循环（RS） control column.
    : Pay attention to the repeat height of the structure!
    35
    Click the 起头 button under 预览 in the 导纱器 ribbon.
  1. The New Pattern xx document window is opened as view and the 导纱器 ribbon appears.
    2. 36
    Open the dialog box via 显示导纱器.
    37
    If necessary, make the desired settings for allocating yarn carriers.
    38
    Start the 工艺 处理:
    Show symbol view after technical processing.

Result after technical processing

    39
    Generate Sintral.
    40
    Start the Sintral 检验.
    41
    提取 the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-16.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-16.zip can be loaded onto the machine with an USB stick or via Ethernet.