Step by Step to 'Pattern-18'

  1. The pattern project Pattern-17 is open.
    1
    Save the pattern under a new name, e.g 'Pattern-18'
    2
    To draw select any desired drawing tool under the 绘图 group.
    3
    In the 花型颜色 tool window, select the desired pattern colors of the basic pattern from the 纱线颜色 color palette (e.g. yarn colors # 3 and # 6) to create the pattern element for the border at the left and right.
    4
    Draw the left / right border into 设计花型.

Border at the left

Border at the right

    5
    Select the area for the pattern element Border at the left.
    6
    Open the context menu with RMB and select 选择 -> 创建花型元素....
  1. Pattern element will be saved locally as 花型元素.
    2. 7
    Select the pattern element for drawing.
    8
    Draw in the pattern element starting from the third pattern row of the 设计花型 up to the end of the basic pattern at the left border.
    : Keep a desired quantity of rows without pattern element (e.g. SJ with yarn color #6) at the end of the basic pattern.
    9
    Select the area for the pattern element Border at the right.
    10
    Open the context menu with RMB and select 选择 -> 创建花型元素....
  2. Pattern element will be saved locally as 花型元素.
    3. 11
    Select the pattern element for drawing.
    12
    Draw in the pattern element starting from the third pattern row of the 设计花型 up to the end of the basic pattern at the right border.
    : Keep a desired quantity of rows without pattern element (e.g. yarn color #6 SJ) at the end of the basic pattern.
    13
    Select the desired total height of pattern rows for CA#1 (e.g. 114 row) in the 花型行 control column.
    14
    Position the cursor in the pattern area.
    15
    Call up the context menu and select 选择 / 颜色排列.
    -  or  -
    Click directly the button in the ribbon.
  3. The Color Arrangement Editor appears with the original standard knitting process of the 2 pattern rows.

Original for Color Arrangement

    16
    Insert the necessary quantity of rows into the executing area.
    17
    Draw-in the needle actions for transferring and weft yarn into the color segments of yarn color #3 (blue).
    18
    Check and correct the entries in the 基准号码 column.
    19
    Make entries to the following control columns:

: The 选择机器 dialog box graphically displays the position and the set type of weft yarn presser foot.

The following link opens the corresponding chapter of the online help:

W Presser Foot

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Presser Foot Correction

: Use the Back button of the browser to go back chapter by chapter.

The following link opens the corresponding chapter of the online help:

Sorting Technical Rows

: Use the Back button of the browser to go back chapter by chapter.

Color Arrangement CA #1

Alternative CA#2

Usage of the following needle actions

  • 纬纱 / 向前翻针及准备 : Combination of transfer to the rear, weft yarn and transfer to the front

    20
    Check the generated Color Arrangement on correct entries with the 检验 button.
    : The knitting procedure cannot be checked!
    21
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the 应用 button.
    - or -
    Close the tool window with button.
    22
    Close the prompt with the desired button:
    23
    Enter the generated Color Arrangement CA#1 via the control column into the desired rows of the design pattern.
    24
    Click the 起头 button under 预览 in the 导纱器 ribbon.
  1. The New Pattern xx document window is opened as view and the 导纱器 ribbon appears.
    2. 25
    Open the dialog box via 显示导纱器.
    26
    Select the yarn carrier with yarn color #3.
    27
    Select in the dialog box under 型号 the 衬纬纱 Qw type of yarn carrier.
  2. The yarn carrier will be marked with the icon.
    3. 28
    If necessary or desired, make further settings for allocating yarn carriers.
    29
    Start the 工艺 处理:
    Show the 工艺花型织物视图.

Fabric View CA#1 + CA#2

    30
    Generate Sintral.
    31
    Start the Sintral 检验.
    32
    提取 the knitting program.
  1. A program for the knitting machine will be created: CMS530W.Pattern-18.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530W.Pattern-18.zip can be loaded onto the machine with an USB stick or via Ethernet.