What was new in CREATE PLUS V2.8

模型边缘 and 模型标记 Docked to the Pattern

The 模型边缘 and 模型标记 tool windows are always docked to document window of the pattern.

View options of the tool windows:

• Fold or unfold at the edge
• Pull to an edge
• Unpin from edge and position it as desired
• Open it with the O key at the desired cursor position at the corresponding shape edge or shape marking entry within the pattern

You call-up both the tool windows as well in the context menu of the pattern and in the 起头 ribbon / 工具窗口 ribbon group.

Replace Exceeding Modules

Settings in 配置 dialog box / Shape Data tab

You make the following settings on the Shape Data tab:

Behavior of Exceeding Modules

Filling Element for Removed Modules

• Select the path of the desired module.
• Select the module of this path.

Only select modules of size 1x1
With bigger modules you will get a warning.
Only the first stitch of the first row of the module will be inserted repeatedly.

The 边缘组织超界模块 function is no longer available in the context menu of the pattern layer.

Stepping Kind 预设收放针

Up to now only available for 尺寸模型.
Now, in the 线模型 as well.

:

• With a preset stepping, it is not always possible to reach any desired target point!

Example:

• If only even-numbered steps have been specified, no target point can be reached at an odd-numbered position.

Therefore, the line table contains the following information for a preset stepping:

Deviating target point of a line

If the desired target point of a line is not reached in the lined shape, both points are displayed separately.

Line View

In addition to the stepping line, a dashed line appears.

• You can set preference points on the line and remove them via the context menu.
• 添加优先点
• 删除优先点
• The stepping line adapts to this curve as closely as possible, according to the preset stepping.
• You can move the preference points as desired.
  This means, you can form the line as desired according to the preset stepping.

Display of Line Dimensions

If one or more lines are selected in a lined shape, the following information about this selection is displayed.

• Coordinates of the start point
• Coordinates of the endpoint
• Absolute width and height

The start and endpoints correspond to the first and last points of the selected lines of the shape.

This information appears at the lower left of the views.

• Line Table
• Lined Shape Editor
• Lined Shape Layer

Function to Create Control Dimensions in Lined Shapes

Functions in the context menu of 基本模型 or 模型元素 of a lined shape:

• Create Vertical Control Dimensions
• Creates vertical control dimensions for this shape element.
• Create Horizontal Control Dimensions
• Creates horizontal control dimensions for this shape element.
• Delete Control Dimensions
• Deletes all control dimensions.

Open Knitting Elements in a document window with different tabs

With the O key, you can open all knitting elements which are positioned at the current cursor position.

• All the Knitting Elements will appear in one single document window with different tabs.
• All the following Knitting Elements you will open with O key will appear in a different tab of the same document window.

Extensions of Pattern Element Editor

The external pattern element editor is extended with the following functions:

• 剪贴板 ribbon group is added to the 起头 ribbon.
• 颜色排列 context menu is available on row selections of pattern elements.
• 创建花型元素... context menu is available on selections within pattern elements.
• 花型元素tool window is available.

Pattern Elements are only allowed in the Design View

Up to now:

• You could copy a selection of the 工艺处理符号视图 and add it to the 花型元素 tool window.

New:

• As the copy of a selection of the 工艺处理符号视图 is not a pattern element, this selection cannot be pasted into the 花型元素 tool window.

Reworked 新编织元素 Dialog Box

The selection at 编织元素类型 of the 新编织元素 dialog box is restricted to following options:

• 结构模块
• 颜色排列
• 模块排列
• 花型元素

The 新编织元素 function is removed from the context menu of the Windows taskbar.

Team Depot in 编织资源管理器

In the 编织资源管理器, you can set up a shared folder on the local network or in the cloud to manage the knitting elements.

Different users can access this folder and thus use common knitting elements.

• Select a common folder in the 选项 / Project Settings / Storage Location dialog box:

• The Team Depot entry appears in the 编织资源管理器.
• 
• Save and Manage Knitting Elements Centrally Under this Path
• Add Subfolders
• Green checkmark: Folder is synchronized
• - OUT OF SYNC - :
  
• You can synchronize the Team Depot via the context menu of the folder.
  Synchronize

Optimized Options for 单针床编织时在动程里均衡横移类型

In the 配置 dialog box / 优化 tab, the 单针床编织时在动程里均衡横移类型 option could previously only be activated or disabled.

New Options:

• Do Not Equalize Racking
  The racking of single-bed knitting rows will not be changed.
• Equalize Racking With the Same Take-down Values
  In case of identical take-down values, the racking of transfer rows will be applied to a neighboring single-bed knitting row if this results in a shorter running time.
• Equalize Racking Even With Different Take-down Values
  Even in case of different take-down values of both rows, the racking of transfer rows will be applied to the neighboring single-bed knitting row.
  The take-down value of the knitting row will be applied to the transfer row.

Presentation of Pattern Rows in the Yarn Carrier View

You can switch the yarn carrier view to the technical row presentation or pattern row presentation.

• With it, you can recognize the motive in the pattern row presentation of the yarn carrier view.
• You can switch the display in the status bar at the bottom right.

Adjust the Needle Bed Distance of ADF Flex

Row by row, you can adjust the Needle Bed Distance as required by different knitting situation.

• New Needle Bed Distance tab of the Pattern Parameters dialog box
• Apply the entries of this tab via the Needle Bed Distance control column into the pattern.
• The adjustment values is carried out in the carriage return.

The first three entries are part of Needle Bed Distance tab by default. These cannot be deleted or edited.

• Small
  Approximately the same distance as the standard machine.
• Medium
  Approximately the same distance as the multi gauge machine.
• Large
  Approximately the same distance as the k&w machine.

New Pattern Report

You can open the Pattern Report dialog box in the 视图 ribbon.

In this dialog box, you make all the settings to create the Pattern Report.

Select the patterns in the upper part of the dialog box.

• The report can be created after 工艺处理 only.
  You cannot select patterns which are not yet technically processed in this dialog box.
• The patterns will be displayed the same way as in the 花型 tool window.

Select the desired data for the Pattern Report in the lower part of the dialog box.

• Select the Pattern Parameters .
• Specify for the selected Pattern Parameters to display the Statistics data as well.

Automatic Saving

选项 dialog box / 数据备份 section

Make the following settings in the Save Project Automatically section:

• Save Project after Technical Processing
  The total project will be saved after Technical Processing.
• Save Project after Create Sintral
  The total project will be saved after Create Sintral.

Automatic Saving with Multiple Processing

Function of the Multiple Processing dialog box:

• Save Project after Multiple Processing
  The total project will be saved after each Multiple Processing despite the settings in the dialog box.

Canceling the Multiple Processing will prevent saving the project.

Working with Jacquard Symbols

Now, you can use Jacquard symbols within new pattern projects.

Settings for new projects in 选项 / Project Settings / MC Jacquard for New Projects

You can draw with Jacquard symbols into the following areas:

• Design View of the Pattern
• Pattern Element
• CA
  Only in the searching row

Watch out following:

• The Jacquard symbols will appear below the status bar of the document windows.
• Jacquard symbols have to be converted to needle actions in the pattern by a CA.
  If not, an error message appears with 展开 or 工艺处理
• Export a pattern as MC Jacquard.
  Function of the context menu on the pattern in the Pattern tool window.
  
• Import a MC Jacquard into a pattern project.
  The function is available via 文件 / 导入
  
• MC 提花 from selection.
  The function is available in the context menu on the selection within the pattern.
  

New functions of the 编织资源管理器

Following new functions available in the 起头 ribbon:

Configuring the Fabric Take-down of Empty Rows

Settings in the 配置 dialog box / 更多设置 tab

Take-down in Empty Strokes

• W0
  Empty rows are done with W0.
• Folgenden Wert verwenden
  The take-down value of the following row will be used for the empty rows.

Multiple Selection of Yarn Carriers in the Yarn Carriers View

Enhanced options for commonly selected yarn carriers

Move Starts Horizontally

• Via the 替换起头 dialog box
• In the Pattern
• In the Lined Shape
• In the Dimensioned Shape
• Positive value of the edit box moves the start to the right.
  Negative values to the left.

In the Pattern

更换花型起头... context menu / 替换起头 dialog box

In the Lined Shape

模型属性 / 替换起头 dialog box

In the Dimensioned Shape

织片属性 / 替换起头 dialog box

New functions of the Text drawing tool

Enhanced Options for Protection Rows

配置 dialog box / 编织区域颜色 tab

New Options

New options for protection rows in 配置 / 编织区域颜色:

• Automatic
  Using the pattern color of the last knitting row
• Use Colors From Module
  The pattern color of the module is used in the protection rows.

New Modules

4 new modules for protection rows in the module database

• Safety rows with cast off, 1 YC, knitting ranges in sequence, YC from the left
• Both sides will be knit one after the other by the same yarn carrier.
• The protection rows starts on the left side.
• Safety rows with cast off, 1 YC, knitting ranges in sequence, YC from the right
• Both sides will be knit one after the other by the same yarn carrier.
• The protection rows starts on the right side.
• Protection rows with Cast-off, 1 YC, Pass over neckline
• Both sides will be knit by 1 yarn carrier.
• The neckline will be passed-over by 1x1.
• Safety rows with cast off, 2 YC
• The protection rows are knit by 2 yarn carrier.
• Notice:
  For this, Use Colors From Module must be active.

Enhanced functions of Technical Processing and Create Sintral

Expanders are added to the Technical Processing and Create Sintral functions of the Start ribbon.

Select the desired function in the expander of technical processing:

• Technical Processing
• Technical Processing and Create Sintral
• Technical Processing, Create Sintral and Sintral Check
• Technical Processing, Create Sintral, Sintral Check and Extract

Select the desired function in the expander of Create Sintral:

• Generate Sintral
• Create Sintral and Sintral Check
• Create Sintral, Sintral Check and Extract

The selection of functions is displayed and retained under the icon. If you click the icon again, the last selection will be executed.

默认 within Needle Area

Drawing in the needle area with 默认 does the following:

• All visible control column data except racking is set to default in the captured rows.