Step by Step to 'Pattern-14'

A pattern project with one pattern and the desired settings is created.

1: Open the tool window 添纱颜色 with in the 花型颜色 tool window.

2: Create a plating color in line P1 of the 添纱颜色 tool window:

In column A:

Yarn Color #3
The symbol via the selection menu for the weft yarn carrier

In column B:

Yarn color e.g. #1

In column C:

Additional yarn color e.g. #2

3: Create the plating color for the start in line P2.

4: Select the desired YPI indices from the 添纱偏移 (YPI) table and allocate them.

5: In the 花型行 control column, select the first 2 pattern rows.

6: Call up the context menu and select 选择 / 颜色排列.

The Color Arrangement editor appears with the default CA.

7: Make the desired changes in the Color Arrangement:

In the processing area:

Draw needle action 前板线圈 - 后板线圈 together with the plating color P1 into existing rows.
Add additional rows for half Milano and draw-in the 后板线圈 needle action with any desired yarn color.

Modifications in Control Columns:

Control column 机头方向
Control column 系统
Control column W 压脚
Control column 压脚修正
Allocate a new stitch length index to the DJ row via the 前板线圈长度（NPv） control column.
Allocate a new stitch length index to the DJ row via the 后板线圈长度（NP^） control column.

Color Arrangement CA1

8: Check the generated Color Arrangement on correct entries with the 检验 button.
: The knitting procedure cannot be checked!

9: Enter the created Color Arrangement via the control column into the remaining pattern rows of the design pattern.
: If necessary, knit-off 2 pattern rows at end with yarn color #1.

10: Open the Start, Tubular (modified) knitting element.

11: Draw the plating color P2 into the knitting rows.

12: If necessary, make the desired settings in the 导纱器 tool window.

13: If desired, make the desired presets in the following control columns:

线圈长度 (NP)
主牵拉（WMF）
速度 (MSEC)

14: Carry out all the steps of processing.

: The extracted file "ADF530-32W.Pattern-14.zip" can be loaded onto the machine with an USB stick or via Ethernet.