Border Processing for Block Jacquard without Shape

Block Jacquard without border processing

Block Jacquard with border processing

The border processing for Block Jacquard with Jacquards with Float or Net rear sides is worked with the Fade-out, Jacquard, Float, Net fade-out module.

: With rear sides knitted on all needles, no border processing is entered.

Stoll technical module with border processing for Block Jacquard

Border processing for Block Jacquard in pattern without shape:

: Attention:
If the pattern is saved, then the border processing cannot be undone.
Because of this, save the pattern project under a different name before the border processing or duplicate the design pattern in the pattern project.

  1. Pattern project with a design pattern is created.
  2. Jacquard areas are drawn into the basic pattern.
  3. Jacquard backs are inserted.
    1
    Open the selection list in the Start ribbon under Dialogs with the button and select Border Processing for Block Jacquard....
    -  or  -
    In the design pattern, select with LMB -> context menu -> Border Processing -> Border Processing for Block Jacquard....
  1. The Border Processing for Block Jacquard dialog box appears.

Search Area

The border processing will be entered in the whole pattern

Border processing only in the selected rows

Fading-out the fabric selvedge at Jacquard

Display of the knitting element

Selection of the Fade-out, Jacquard, Float, Net technical module for the border processing

: Fade-out module: Knitting technique single jersey

Width

Desired fade-out width for the border processing in needles

:
Default Setting: 2 Needles wide
the border curls up with a fade-out width bigger than 2 needles.

    2
    Make the desired presets in the dialog box.
    3
    Tap the Apply key.
  1. The desired border processing will be entered and displayed in the design pattern.
    2. 4
    After entering all necessary border processings in the design pattern, close the dialog box with .
    5
    If necessary, to view open the Expanded Symbol View.
    6
    Start the Technical Processing:
    Show symbol view after Technique.
    7
    Generate Sintral.
    8
    Start the Sintral Check.
    9
    Extract the knitting program.
  2. A program for the knitting machine will be created.
  3. Load knitting program into the machine.

: The extracted file can be loaded onto the machine with an USB stick or via Ethernet.

Procedure with the pattern creation:

: With this possibility, the border processing can be changed or deleted with easy steps. A square shape in the size of the design pattern is created for this purpose.

  1. Pattern project with a design pattern is created.
  2. Jacquard areas are drawn into the basic pattern.
  3. Jacquard backs are inserted.
    1
    To create a project-related lined shape, select the Shapes tab in the tool window.
    2
    Open the context menu with RMB and select Create New Shape of Size M....
  1. The New Lined Shape tool window appears.
    2. 3
    Make the desired entries:
  • Shape Name : Any
  • Input Format : Stitch
    4
    Confirm with the OK key.
  1. The new lined shape (basic shape) is graphically displayed in the Shapes tab and in a new document window New shape xx [size x] as rectangle.
    2. 5
    To adjust the displayed rectangle to the size of the basic pattern, in the ribbon Shape Editing under Properties, click the Line Table button.
    - or -
    Use the graphic displayed in the New shape xx [size x] document window.
    6
    Open Line Table in the ribbon.
  2. The table Lined Shape with the values of the rectangular shape is displayed.
    3. 7
    Adapt the values in the table to the size of the basic pattern.
    8
    Allocate the desired attributes to the shape lines:
  • Fade-out width: Set value to 0, since the different Jacquard areas are not to be hidden with Stitch v, with Transfer.
    9
    In the New Shape xx [Size x] document window, select the desired shape line with the graphic shape presentation.
    10
    Position cursor on the selected shape line.
    11
    Select LMB -> Line Properties context menu.
  1. The Line Properties tool window is opened for the selected shape line.
    2. 12
    Make the following entries under the for Jacquards (float / net) section:
  • Content: Select Fade-out, Jacquard, Float, Net Fade-out Module.
  • Width: specify the desired fade-out width.
    • Default setting: 2 Needles wide
      Attention: The fade-out width is also executed in the rows of the net pick-up and the net ending.
    13
    In the Shapes tool window select the created shape with LMB.
    14
    Open the context menu -> Position Shape -> select Pattern name.
  1. The shape is floating in the selected basic pattern.
    2. 15
    Enable the button of the document window.
    16
    Start the Technical Processing:
    Show symbol view after Technique.
    17
    Generate Sintral.
    18
    Start the Sintral Check.
    19
    Extract the knitting program.
  1. A program for the knitting machine will be created.
  2. Load knitting program into the machine.