What's new in CREATE PLUS?

Enhanced settings of the line properties.

Stepping Kind Definito dall'utente

User defined lines are exclusively defined by the sub-rows of the Tabella delle linee.
With selecting the Definito dall'utente stepping kind, no Scalatura and no Funzione will be offered in the Proprietà della linea.

• User defined lines are marked with M in the view of the lined shape.
• In the view of the lined shape, you cannot change a user defined line, as it is exclusively defined by the sub-rows of the Tabella delle linee.
  If a start or end point of a user defined line is moved, the whole line will get moved the same way.
• Line Properties

New variants of Fair Isle within the lined shape.

Four variants of the Andamento della scalatura Fair Isle are available within the lined shape.

The variants are offered in the Proprietà della linea for selection.

• Standard
• Knitting technique as before with the Fair Isle selection.
• Trapezio
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• Dente di sega
• In the Lined Shape:



• Folded-out in the Raster-Shape:



• Piega
• In the Lined Shape:

Each variant has specific options.

The Trapezio and Dente di sega variants can be displayed by the Raster-Shape folded out or folded in.
Fold In/Out button below of the cursor attributes

• Multi-step Narrowing

Each lined shape has its own line table.

Each lined shape has its own Tabella delle linee docked to the document window.

• The Tabella delle linee is pinned to the right edge by default.
  You can drag it to any desired edge of the document window.
• You can expand the Tabella delle linee and unpin it from the edge.
• The table always remains related to the same shape.
• You can dock the Tabella delle linee again to the corresponding lined shape by the Ancora function in the context menu of the title bar.
• You can hide a docked Tabella delle linee via the pin in the title bar.
• You can open and edit several line tables of different shapes at the time.
• You can copy areas of a Tabella delle linee and paste them into another Tabella delle linee.
• Calling up the Tabella delle linee is no longer possible in the Avvio ribbon or the context menu of the lined shape layer.
• Line Table

Adjustable view on the lines of the right and the left shape halves

You can move the areas of the shape lines of the left or right shape half in the Tabella delle linee.

Therefore, drag the separator between the areas as desired to the top or bottom.

Raster-Shape Preview of a Lined Shape

You can get the rasterized view for each lined shape of the Tagli tool window via the context menu.

• Rasterized view appears folded-out.
• Especially helpful for the Trapezio and Dente di sega variants of Fair Isle.
• The rasterized view cannot be edited.



• Context menu on the shape

Modified behavior of starts with positioned shapes (≤ V2.6 vs. V2.7)

• Behavior when positioning a shape without start on a pattern with start:
• The start of the pattern gets allocated to the shape.
• If the shape is moved on the pattern, the start will be moved accordingly.
• With the positioned shape, the start can only be modified by the start module and not within the pattern.
• If the shape is withdrawn from the pattern, the start returns to its original position within the pattern.
• Behavior when loading or importing a pattern of a former version (≤ V2.6):
• The pattern of the former version has a positioned shape.
• The start of this pattern has been modified within the pattern having the positioned shape.
  Therefore, the start within the pattern is different from the start module.
• When loading or importing this pattern in version V2.7, the pattern will be converted to a raster-shape.
  With it, the modified start will be kept in the pattern.

Fully Fashion – Shape Data Print

Improved Print Function for Lined Shapes and Dimensioned Shapes

• File ribbon / Report sui dati di taglio .
• Shape Data Report (view)

The individual topic:

• All shape elements will appear in the preview
• The shape lines of asymmetric shapes appear next to another for the left and right shape halves.
  
• Layouts for asymmetric shapes:
  

Configuration Template in Le mie macchine Dialog Box

• New functions for the Modello di configurazione in the context menu on the entries under Le mie macchine:

• You can freely define the storage location of the Modello di configurazione.
• A Modello di configurazione is basically machine specific.
• However, you can allocate a Modello di configurazione to a different type of machine.
• With it, only the relevant data will be applied.
• Configuration Template
• Select Machine

Loading templates in the New Pattern Project dialog box

• Open the file explorer via the … button and select the template.
• The last selected template is offered in the Nuovo progetto per disegni dialog box.
• If you have selected your own machine (My Machines) with an already allocated Modello di configurazione, this will be applied directly.
• The Modello di dati Setup is only loaded via the Nuovo progetto per disegni dialog box.
• The Modello di dati Setup setting has been removed from the Opzioni dialog box.
• Nuovo progetto per disegni (finestra di dialogo)

Create a new function in the Setup Data Template and assign it.

• Sintral Tab

Multiple Selection of yarn carriers in the Guidafili tool window

You can select several yarn carriers at the same time in the tool window Guidafili.

With it, the available options are reduced as follows:

• Tipo di guidafilo
• Fissaggio del bordo

The same behavior arises in the following situations:

• If you selected a color area within the Parametro colore table or the Vista guidafili to which several yarn carriers are allocated.
  E.g. with plating or multi-system knitting.
• If you have selected several color areas having different yarn carriers.
• Available Yarns and Yarn Carriers Tab

Esclusione dalla pinzatura (YG:n!;)

• With the check box enabled, the yarn carrier will not be clamped but moved to its position at the SEN edge.
  Only with ADF machines.
• Settings for Yarn Carriers

Color Parameter Table

Extra position for the column of row quantity

The column for quantity of rows no longer only refers to knitting-out.
The entry define the distance of color fields from which on you want to knit-out, to move to SEN edge or to clamp.

Therefore, the column is no longer part of the knitting-out group but placed at the left in the general area.

Row-offset for Knitting-in by Technical Rows

You can enter the Row-offset for Knitting-in in pattern rows as well as in technical rows.

• Color Parameters

The Zone di lavoro (SEN) and Tandem (YLR) sectors have been reworked.

Sector Zone di lavoro (SEN) of the Guidafili tool window

• Dati da configurazione are removed from the upper area.
• The SEN areas are shown in the middle and more clearly.

Sector Tandem (YLR) of the Guidafili tool window

• The yarn carrier allocation of both carriages is shown.
• In this view, you can shift the yarn carrier tracks of the right carriage only.

• Knitting Areas (SEN) Tab
• Tandem (YLR) Tab

Detecting opened knitting elements, shapes and patterns

Opened knitting elements, shapes and patterns are marked by OPEN label in the tool window.

• Opened
  Label with gray background
  
• Opened and active
  Label with blue background
  

Marking of modified STOLL machines

If you select a STOLL machine in the Nuovo progetto per disegnidialog box, then you can make settings for this machine at the same time.

• Then, the settings of this machine no longer correspond with the STOLL default.
• An orange button appears next to the machine label representing the deviation from the STOLL default.
• You recall the modifications by click on the orange button.
  Then, the settings of this machine correspond with the STOLL default again.

New function Esecuzione di disegno con selezione

• In the Avvio ribbon / Modifica ribbon group
• In the Selezione ribbon

With Esecuzione di disegno con selezione, the drawing area is at once selected when drawing.

• The selection is added when drawing additively.
  With CTRL
• The selection is canceled when drawing subtractively.
  With CTRL + ALT
• Modify (Ribbon Group)

Groups and orders in the Multiple Processing dialog box

The setting of the Disegno tool window is taken into account by the Lavorazione multipla dialog box.

The working with groups and orders is applied the same way.

• Multiple Processing (group)

Standalone editor for Sintral functions in the Setup Data

You will find these sections in the Sintral tab of the Dati Setup.

• Richiamo della funzione (F:)
• Istruzione Sintral/PRINT
• Funzione Sintral

You can edit functions and Sintral commands in the standalone Sintral Editor much easier, faster and clearer.

Assigning Sintral Functions by the Setup Data

Now, you can assign the Sintral functions for Prima di START and Scarico telo also within the Setup Data.

This selection is no more available via Configuration / Sintral.
There you will find the link to the Sintral functions of the Setup Data.

The selection for the project will be saved with the Setup Data Template.

• Function call
• Sintral Instruction / PRINT
• Sintral Function

The Descrizione column is added to several tool windows.

The Descrizione column is available in the Colori vanisé, Colori a più cadute, Assegnazione filato and Tabella delle linee table.

Ruler in the Vista telo

At the left and upper edge of the Vista telo

Define the unit of measure by cm or inch in the Impostazioni progetto tab of the Opzioni dialog box for new projects.

• Fabric View

Revision of the Options dialog box.

The tabs of the Opzioni dialog box has partly been renamed and updated

The functions within the tabs have been simplified, made more consistent and better organized.

• Options

12th + 13th Gen Intel® Core™ Desktop Processors do not support the Simultaneous Fabric Preview faultlessly.

• Activate the Correct display errors with the latest Intel processors check box in case of error.
  File ribbon group -> Opzioni dialog box -> Generale tab -> Impostazioni grafiche section
• Disable this function again if the presentation gets faulty.