Step by Step to Training Pattern

    1
    Creating a pattern project with one pattern and the desired settings.
    2
    To draw select any desired drawing tool under the Ferramentas de desenho group.
    3
    In the Cores da amostra tool window select the desired pattern color from the Cores de fio color palette:
  • Cores de depósito
    • : The yarn carriers are not automatically placed on the yarn carrier rails.
      The yarn carrier home position is determined in the Processamento técnico.
  • Cores técnicas (do not use to create a design pattern)
    • : Yarn carriers are automatically placed on the yarn carrier rails due to STOLL default settings and are taken into account during the determination of the yarn carrier home position during the Processamento técnico.
  • Cores de guia-fios
    • : Yarn carriers are automatically assigned to a yarn carrier rail and remain unchanged during the determination of the yarn carrier home position during the Processamento técnico.
  • Eliminar cor
  • Cores de vanizagem
  • Cores de sistemas múltiplas
    For multi-system knitting

For drawing the design pattern, with it several yarn carriers may be necessary for each yarn color.

  • Bobbin with color
    Not used within design pattern
  • Bobbin with color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail. Yarn carrier home position can be determined automatically.

For drawing the design pattern, with it one yarn carrier is used for each magazine color.

  • Magazine Color
    Not used within design pattern
  • Magazine Color +
    Used within design pattern

: Yarn carriers will not be allocated automatically to a yarn carrier rail.
Yarn carrier home position can be determined.

Recommendation!

Draw the design pattern by yarn colors or magazine colors in order to get common yarn carrier home positions (order related data) for all the pattern within the order.

For drawing the design pattern, with a yarn carrier already positioned on the corresponding rail for each yarn carrier color in use.

Result:
The yarn carrier home position is already specified when drawing with yarn carrier colors.

: You can change a yarn carrier home position by re-drawing with another yarn carrier color or by the Trocar cores de guia-fios dialog box.

Cores técnicas for creating or changing technical modules.

  • Starts
  • Picking-up after pressing-off
  • etc.
    4
    Draw the motif with the desired yarn color.

: When drawing the motif pay attention if necessary to even numbered heights of the color areas!

    5
    Click the Início button under Pré-visualização in the Guia-fios ribbon.
  1. The New Pattern xx document window is opened as view and the Guia-fios ribbon appears.
    2. 6
    Open the Guia-fios tool window.
    In Guia-fios group -> Exibir guia-fios
  2. The Guia-fios tool window appears with the Fios e guia-fios disponíveis tab active.

:
For each color in the pattern color tables used in the design pattern, a color area is created in the color parameter table. This means that you can make only one preset for this color area.
For pattern related, different changes of a color area sub-colors must be created. You have to draw them manually in the design pattern at the point to be changed. Then, other specifications can be set in the color parameter table.

Structure and column headers of the Parâmetros de cor table:

Group 1: General / Table header:

  • 1st row:
    All the symbols identifying the table columns
  • 2nd Row 'D'
    Default settings for the respective column
    Settings from the STOLL file - cannot be modified at the moment

: Default settings are applied from a STOLL file and cannot be modified at the moment.
These are automatically applied to all colors without specifications.

Group 1: General

1. Column

Entry D for the definition of the 2nd row of the table
(D = Default settings for the table columns)

2. Column

Display for available sub-colors

Cor

Display of all the colors used in a project

  • Symbol and color:
    Not visible but used within the design pattern.
  • Symbol and color + :
    Visible and used within the design pattern.

: The symbols are depending on the pattern color table they are origin.

Guia-fios tece uma cor de sistemas múltiplas

Specifications with multi-system knitting

Guia-fios tece uma cor de vanizagem

Specifications with plating

Bascular

Settings for the swivelling of intarsia yarn carriers or of autarkic yarn carriers

Quantity of Rows for Knitting-out, SEN edge and clamping
Define the distance of color fields from which on you want to knit-out, to move to SEN edge and to clamp.

Specify the maximum distance between the color fields of the yarn carrier.
If this value is exceeded, one of the intended actions will take place:

  • Knitting-out the yarn carrier
  • Move the yarn carrier to the SEN border
  • Clamp Yarn Carrier

Group 2: Knitting-in

Direção de início

Specification of the knitting direction for the first row of a color (color area)

Número de colunas sem Entrar tecendo

Quantity of columns (needles) without Knitting-In module

Módulo para entrar tecendo

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largura de repetição para entrar tecendo

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

Deslocamento de fileiras para desprender

Column appears automatically if a module for knitting-in with casting-off is used

Fileiras de offset para entrar tecendo

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • Fileiras de amostra
      Default Setting
    • Fileiras técnicas
  • Em fileira extra

Nó / Conexão no início

Presetting a module for knot / binding at start of a color area without / with knitting-in.

Offset de coluna para entrar tecendo com nó

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Group 3: Knitting-out

Direção de saída da tricotagem

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

Módulo para sair tecendo

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:
Example

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largura de repetição para sair tecendo

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

Deslocamento de fileiras para desprender

Column appears automatically if a module for knitting-out with casting-off is used

Offset de fileira para sair tecendo

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • Fileiras de amostra
      Default Setting
    • Fileiras técnicas
  • Em fileira extra

Nó / Conexão no final

Presetting a module for knot / binding at end of a color area without or with knitting-out.

Offset de coluna para sair tecendo com nó

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Nó / Conexão no final column.

Group 4 : Intarsia Binding

Conexão intarsia à esquerda

Presetting of a binding or no binding at the left border of the color area

Conexão intarsia à direita

Presetting of a binding or no binding at the right border of the color area

Direção da conexão intarsia à esquerda

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • Conexão ao entrar tecendo
    Binding at the left at the beginning of a knitting row
  • Conexão ao sair tecendo
    Binding at the left at the end of a knitting row

Direção da conexão intarsia à direita

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • Conexão ao entrar tecendo
    Binding at the right at the beginning of a knitting row
  • Conexão ao sair tecendo
    Binding at the right at the end of a knitting row

Módulo para conexão intarsia à esquerda

Presetting of the knitting mode for binding at the left border of the color area

Módulo para conexão intarsia à direita

Presetting of the knitting mode for binding at the right border of the color area

Group 5: Border Processing

Escalonamento permitido sem processamento de ourelas, lado esquerdo

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

Escalonamento permitido sem processamento de ourelas, lado direito

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

Módulo para processamento de ourelas à esquerda

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the Escalonamento permitido sem processamento de ourelas, lado esquerdo column.

Módulo para processamento de ourelas à direita

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the Escalonamento permitido sem processamento de ourelas, lado direito column.

    7
    Carry out Processamento técnico if necessary.

: After carrying out the Processamento técnico you are able to view and weigh up the automatic processing, if corrections / optimizations are necessary.

    8
    Back to the Amostra de desenho to make pattern-related changes.
    9
    Open the Guia-fios tool window again for this purpose.
    10
    Make the desired changes in the following groups:

Explanation 'Knitting-in':

The yarn carrier is at the fabric selvedge and must be brought into the fabric to knit at the beginning of its color field.

  • Default setting: Using Intarsia yarn carriers (swivelling)
  • To knit-in the yarn carriers there are different technical modules available in the Knit Explorer.
  • For knitting-in the yarn carriers from the fabric selvedge, the shortest distance (way) to the color field is always used by default.
    : Regarding the knitting technique, many options are available.
  • If there are various color areas of the same color available in the design pattern, then the yarn carrier is knitted-out at the end of the color area and then knitted-in again from its last position.

Example with the Entrar tecendo malha retida de fio flutuante, conexão de malha retida technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-in

Direção de início

Specification of the knitting direction for the first row of a color (color area)

Número de colunas sem Entrar tecendo

Quantity of columns (needles) without Knitting-In module

Módulo para entrar tecendo

Specification of the knitting mode for knitting-in

:
The module for knitting-in has two functions:

  • Repeatable knitting mode for feeding-in the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largura de repetição para entrar tecendo

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable.

Deslocamento de fileiras para desprender

Column appears automatically if a module for knitting-in with casting-off is used

Fileiras de offset para entrar tecendo

Knitting-in of the yarn carrier by x rows before the beginning of the color area

  • related to
    • Fileiras de amostra
      Default Setting
    • Fileiras técnicas
  • Em fileira extra

Nó / Conexão no início

Presetting a module for knot / binding at start of a color area without knitting-in.

: Entry in Intarsia color areas.

Offset de coluna para entrar tecendo com nó

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Knot / Binding at Start column.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Direction of knitting-in yarn carriers:

The knitting-in direction of a yarn carrier is specified by the home position of the yarn carriers.

  • Yarn carrier is on the left side in the clamping and cutting device -> the yarn carrier is knitted from the left to the fabric selvedge.
  • Yarn carrier is on the right side in the clamping and cutting device -> the yarn carrier is knitted from the right to the fabric selvedge.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Two possibilities in the Guia-fios tool window:

  • In the magazine move the yarn carrier manually from 'undefined' to the desired side (left / right) of the magazine.

Automatic

Manually

Yarn carriers are positioned by default in the 'undefined' area in the magazine.

Result:
Yarn carriers are automatically placed on the yarn carrier rails during the technical processing and the yarn carrier home position is determined from it.

Rule:
The yarn carrier is placed on the side in the yarn carrier home position, where the yarn carrier has the shortest distance from their color field to the fabric selvedge.

Place the yarn carrier manually with LMB to the left or right in the magazine.

Result:
Yarn carriers are placed on the yarn carrier rails during the technical processing according to the positioning in the magazine. The yarn carrier home position is determined from it.

: The path for the knitting-in to the color field may be lengthened due to the manual moving.

  • Move the yarn carriers allocated to the yarn carrier rails to the desired rail side.

Example 1

Example 2

1

Yarn carrier on the right side of the yarn carrier rails

Yarn carrier 3A right was manually moved to the left side.

: When using yarn colors; it is also possible to move the yarn carrier to a different rail number.

2

Yarn carrier on the left side of the yarn carrier rails

:

  • Yarn carriers placed on the left side ((2)) are knit-in from the left.
  • Yarn carriers placed on the right side ((1)) are knit-in from the right.

: The direction of knitting-in of a yarn carrier is always carried out from last position.

Preset in Direção de início column:

The following Intarsia process is used by default for the processing with the Processamento técnico.

: This even processing results in a beautiful, even fabric image with the highest machine run time, which is why the yarn carriers are also grouped. This way the run time is reduced.

Direção de início column:

  • To change the knitting direction of the first stitch row of a color field
    : The change influences the 'even' Intarsia processing.

Preset with Número de colunas sem Entrar tecendo:

Número de colunas sem Entrar tecendo column:

A

Distance of the color field from the fabric selvedge in needles (columns), where no module is entered to be knit-in.

  • A ≥ value:
    Technical module for knitting-in is entered.
  • A < value:
    No technical module for knitting-in

Preset in Módulo para entrar tecendo and Largura de repetição para entrar tecendo column:

  • These two columns work together.
    If a corresponding module is selected in the Módulo para entrar tecendo column, then the Largura de repetição para entrar tecendo column is active or displayed.
  • The technical module for knitting-in consists of 2 pieces of information:
    • Binding
    • Repetition

Example

1

Binding

2

Repetition

Selection of the desired technical module for the knitting-in

Example: Entrar tecendo malha retida de fio flutuante, conexão de malha retida

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 4

Preset in Deslocamento de fileiras para desprender column:

  • The Largura de repetição para entrar tecendo column and the Deslocamento de fileiras para desprender column are active, if in the Módulo para entrar tecendo column a corresponding knitting-in module with casting-off is selected.
  • The technical module for knitting-in with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

Example

1

Binding

2

Repetition

3

Number of pattern rows for the cast-off

Selection of the desired technical module for the knitting-in

Example: Malha retida e malha de desprendimento, Entrar tecendo

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows the tuck is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in Fileiras de offset para entrar tecendo column:

Fileiras de offset para entrar tecendo column to move the knit-in row.

Standard behavior when knitting-in a yarn carrier to their color field

Use of the column
Fileiras de offset para entrar tecendo

Yarn carriers are knit-in by default in the first knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-in 2 pattern rows before the start of the color field.

: The yarn carrier is located in the fabric until the color area begins to be knitted.
Recommendation: Using Intarsia yarn carriers.

Preset in Nó / Conexão no início and Offset de coluna para entrar tecendo com nó column:

These two columns work together, which means that if a corresponding module is selected in the Nó / Conexão no início column, then the Offset de coluna para entrar tecendo com nó column is active or displayed.

Example without column offset (default)

1

Module for the knitting-in

2

Selection e.g. of the Nó, Malha retida, Início, Entrar tecendo module

No entry in this Offset de coluna para entrar tecendo com nó column

Example with column offset

1

Module for the knitting-in

2

Selection of the Nó, Malha retida, Início, Entrar tecendo module

Entry of a value in this Offset de coluna para entrar tecendo com nó column

Example: -2

Explanation 'Knitting-out':

At the end of a color area, the yarn carrier is brought from the fabric to the fabric selvedge (knitted-out).

  • To knit-out the yarn carriers there are different technical modules available in the Knit Explorer.
  • The knitting-out (direction) of the yarn carriers is entered into the pattern according to the following points:
    • Pattern structure
    • Even Intarsia procedure
    • Yarn carrier positions

Example with the Sair tecendo malha retida de fio flutuante, conexão de malha retida technical module

Front Side of Fabric

Back Side of Fabric

Result: Knitting-in and knitting-out with tuck and float is only visible on the fabric back.

: When finishing, the thread ends must be pulled out manually and knotted at the color field selvedge.

Knitting-out

Direção de saída da tricotagem

Preset of the direction for knitting-out of the yarn carrier at the end of a color area

Número de fileiras para sair tecendo

Preset of the distance of color areas from which on knitting-out starts.

Módulo para sair tecendo

Preset of the knitting mode (module) for knitting-out

:
The module for knitting-out has two functions:

  • Repeatable knitting mode for feeding-out the yarn carrier
  • Knitting mode for knot or binding at the edge of the color area

Largura de repetição para sair tecendo

Presetting of the module width in total for the knitting mode of feeding-in the yarn carrier

: The module width is repeatable

Deslocamento de fileiras para desprender

Column appears automatically if a module for knitting-out with casting-off is used

Offset de fileira para sair tecendo

Knitting-out of the yarn carrier by x rows after the end of the color area

  • related to
    • Fileiras de amostra
      Default Setting
    • Fileiras técnicas
  • Em fileira extra

Nó / Conexão no final

Presetting a module for knot / binding at end of a color area.

: Entry in Intarsia color areas.

Offset de coluna para sair tecendo com nó

Move the position of a knot (module) by x columns to the left or right.

: This column is displayed automatically if a module is allocated in the Nó / Conexão no final column.

Preset in Direção de saída da tricotagem column:

: With the Processamento técnico, the yarn carriers are calculated and knitted-out automatically according to the pattern.

  • Direção de saída da tricotagem column, to manually influence the automatic calculation of the knitting-out.

: The manual change of the direction of the knitting-out of a color field influences the processing of the following pattern rows in the basic pattern.

Preset with Número de fileiras para sair tecendo:

Quantity of Rows for Knitting-out, SEN edge and clamping column in group 1 - General

A

Preset of a distance between two color fields of a yarn carrier in pattern rows

Default setting (A) 3 (pattern rows)

Result:

  • Distance A < 3:
    At the end of the first color area no knitting-out is entered and therefore no knitting-in for the second color area. The yarn carrier stops in the fabric.
    : The use of Intarsia yarn carriers is recommended for this.
  • Distance A ≥ 3:
    At the end of the first color area a 'Knitting-out' technical module is entered and therefore also a 'Knitting-in' technical module for the second color area.
    The yarn carrier is positioned at the fabric selvedge.

Preset in Módulo para sair tecendo and Largura de repetição para sair tecendo column:

  • These two columns work together.
    If a corresponding module is selected in the Módulo para sair tecendo column, then the Largura de repetição para sair tecendo column is active or displayed.
  • The technical module for knitting-out consists of 2 pieces of information:
    • Binding
    • Repetition

: The behavior of the 'Knitting-out' technical modules is identical with the behavior of the 'Knitting-in' technical modules.

Selection of the desired technical module for the knitting-out

:

Technical module consists of two parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.
Example: 4

Preset in Deslocamento de fileiras para desprender column when knitting-out:

  • The Largura de repetição para sair tecendo column and the Deslocamento de fileiras para desprender column are active, if in the Módulo para sair tecendo column a corresponding knitting-out module with casting-off is selected.
  • The technical module for knitting-out with casting-off consists of 3 pieces of information:
    • Binding
    • Repetition
    • Casting-off after x pattern rows

: The behavior of the 'Knitting-out with casting-off' technical module is identical with the behavior of the 'Knitting-in with casting-off' technical module.

Selection of the desired technical module for the knitting-out

Example: Malha retida e malha de desprendimento, Sair tecendo

:

Technical module consists of three parts:

  1. Binding: The knitting information is inserted 1x.
  2. Repetition: The knitting information is repeated in the module width defined under in connection to the binding up to the fabric selvedge.
  3. Quantity of pattern rows after which it is to be cast-off.

Specification of the module width for the repetition, which as such is repeated up to the fabric selvedge.

Example: 8

Specification after how many pattern rows is to be cast-off.

Default setting: 1 (pattern row)

Example: 2

: As a result you get a longer float.

Preset in Offset de fileira para sair tecendo column:

Offset de fileira para sair tecendo column to move the knit-out row.

Standard behavior when knitting-out a yarn carrier from their color field

Use of the column

Offset de fileira para sair tecendo

Yarn carriers are knit-out by default in the last knitting row of a color field.

Example: 2 pattern rows

The yarn carrier is knit-out 2 pattern rows after the end of the color field.

: The yarn carrier is located at the end of the color area until the knitting-out in the fabric.
Recommendation: Use Intarsia yarn carriers.

Preset in Nó / Conexão no final and Offset de coluna para sair tecendo com nó column:

These two columns work together, which means that if a corresponding module is selected in the Nó / Conexão no final column, then the Offset de coluna para sair tecendo com nó column is active or displayed.

Example without column offset (default)

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

12

Module for Knitting-out

2

Selection of the Nó, Malha retida, final module

No entry in the Offset de coluna para sair tecendo com nó

Example with column offset

: The behavior of the 'Knot / Binding at End' technical module is identical with the behavior of the 'Knot / Binding at Start' technical module.

13

Module for Knitting-out

2

Selection of the Nó, Malha retida, final module

Entry of a value in the Offset de coluna para sair tecendo com nó column

Example: -2

Explanation 'Intarsia Binding':

Two neighboring knitting areas (color areas) are connected with each other, with the help of the 'Intarsia Binding'.

  • For the Intarsia binding there are different technical modules available in the Knit Explorer.
  • Each color area has a left border and a right border, that can be edited independently from one another.
  • The Intarsia binding is entered corresponding to the carriage direction.

Intarsia Binding

Conexão intarsia à esquerda

Presetting of a binding or no binding at the left border of the color area

Conexão intarsia à direita

Presetting of a binding or no binding at the right border of the color area

Direção da conexão intarsia à esquerda

Specification for inserting the Binding module at the left border of the color area depending on the carriage direction

  • Conexão ao entrar tecendo
    Binding at the left at the beginning of a knitting row
  • Conexão ao sair tecendo
    Binding at the left at the end of a knitting row

Direção da conexão intarsia à direita

Specification for inserting the module Binding at the right border of the color are depending on the carriage direction

  • Conexão ao entrar tecendo
    Binding at the right at the beginning of a knitting row
  • Conexão ao sair tecendo
    Binding at the right at the end of a knitting row

Módulo para conexão intarsia à esquerda

Presetting of the knitting mode for binding at the left border of the color area

Módulo para conexão intarsia à direita

Presetting of the knitting mode for binding at the right border of the color area

'Intarsia Binding at the Left' for the left selvedge of a color field:

Connection at the left selvedge of a color field to their neighboring left color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the Malha retida à frente, conexão Intarsia module.

Use of the Conexão intarsia à esquerda column to make the following settings:

  • Conexão ON : a Intarsia binding at the left of the color field edge will be entered
  • Conexão OFF : no Intarsia binding at the left of the color field edge will be entered
  • Automático : Default Setting
  • Predefinição : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Conexão ON

At the left selvedge of the color field ((2)) a Intarsia binding is entered.

Conexão OFF

NO Intarsia binding is entered at the left selvedge of the color field ((2)).

'Intarsia Binding at the Right' for the right selvedge of a color field:

Connection at the right selvedge of a color field to their neighboring right color field. Each color field is connected with the neighboring color field. This results in a closed selvedge between the two color fields.

: By default, all color fields are automatically () connected with the Malha retida à frente, conexão Intarsia module.

Use of the Conexão intarsia à direita column to make the following settings:

  • Conexão ON : a Intarsia binding at the right will be entered
  • Conexão OFF : no Intarsia binding at the right will be entered
  • Automático : Default Setting
  • Predefinição : Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Conexão ON

At the right selvedge of the color field ((1)) a Intarsia binding is entered.

Conexão OFF

At the right selvedge of the color field ((1)) NO Intarsia binding is entered.

Example: NO Intarsia binding between two color fields

: The Intarsia binding at the right and left was turned off in all color fields. This way a vertical opening results.

Direção da conexão intarsia à esquerda for the left selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

Direção da conexão intarsia à esquerda column

Conexão ao entrar tecendo

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

Conexão ao sair tecendo

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

Predefinição

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

'Direction of the Intarsia Binding at the Right' for the right selvedge of a color field:

The module for the Intarsia binding is entered depending on the carriage stroke.

  • Enter module according to the carriage direction at the start of a knitting row
  • - or -
  • Enter module according to the carriage stroke direction at the end of a knitting row

Direção da conexão intarsia à direita column

Conexão ao sair tecendo

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the end of a color field (left selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the end of a color field (right selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is not inserted securely, since the tuck can be pulled from the needle hook, because of the carriage reversal and the take-up function of the Yarn Tensioner.

Conexão ao entrar tecendo

Default Setting

  • Carriage stroke to the left <<:
    • The Intarsia binding is entered at the start of a color field (right selvedge of the color field) and then the pattern row is knitted.
  • Carriage stroke to the right >>:
    • The Intarsia binding is entered at the start of a color field (left selvedge of the color field) and then the pattern row is knitted.

: The Intarsia binding is inserted securely as the following yarn carrier binds the tuck.

Predefinição

Resetting to default (see preset in the 2nd row 'D' of the color parameters table)

Preset in 'Module for Intarsia Binding at the Left' and 'Module for Intarsia Binding at the Right' column:

  • For the Intarsia binding there are different technical modules available in the Knit Explorer.
    • Binding with tuck
    • Binding with stitch
    • No binding (= vertical opening)
  • Column Módulo para conexão intarsia à esquerda:
    Selection of the module to be used at the left border of the color field
  • Módulo para conexão intarsia à direita column.
    Selection of the module to be used at the right border of the color field
  • Variable module allocation at the left and right color field border

: Combination possibilities of the different bindings:
There are many options how the types of bindings at the color field selvedges
can be combined, where the right and left color field selvedge may also
differ from one another.

Example: Module Malha retida à frente, conexão Intarsia (Standard)
  • Light blue marking:
    Intarsia Binding at the Left: Tuck
  • Light green marking:
    Intarsia Binding at the right: Tuck

: Tuck binding is not visible on the front side of the fabric.

Example: Module Malha à frente, conexão intarsia

  • Light blue marking:
    Intarsia Binding at the Left: Stitch
  • Light green marking:
    Intarsia Binding at the right: Stitch

: Stitch binding is visible on the front side of the fabric.

Front Side of Fabric

Explanation 'Border Processing':

The concept 'Border processing' describes the processing of the steps at the left / right border of a color area (edge) depending on the carriage stroke direction. The yarn carrier is positioned according to the shape for the following knitting row, with the help of the border processing.

  • For the Processamento de ourelas there are different technical modules available in the Knit Explorer.
    • Feed:
      The concept 'Feed' describes the positioning of a yarn carrier regarding the following knitting row of its own color field. For this, there are different options regarding the knitting technique.
  • Each color area can be edited differently at the left / at the right.
  • The modules are entered according to the carriage direction.

Group: Border Processing

Escalonamento permitido sem processamento de ourelas, lado esquerdo

Maximum number of needles when widening at the left border of the color area without automatic border processing.

: No module is inserted.

Escalonamento permitido sem processamento de ourelas, lado direito

Maximum number of needles when widening at the right border of the color area without automatic border processing.

: No module is inserted.

Módulo para processamento de ourelas à esquerda

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the setting in the Escalonamento permitido sem processamento de ourelas, lado esquerdo column.

Módulo para processamento de ourelas à direita

Presetting of the knitting mode for the border processing (feeding) in case of large widenings (stepping) of the color area

: With steppings greater than the settings in the Escalonamento permitido sem processamento de ourelas, lado direito column.

Escalonamento permitido sem processamento de ourelas, lado esquerdo and Escalonamento permitido sem processamento de ourelas, lado direito for the borders of a color field:

'Allowed stepping' describes the number of needles, where the module for the border processing is not entered.

: Default value with 'allowed stepping' at the left and right is 1 needle.

  • Escalonamento permitido sem processamento de ourelas, lado esquerdo
  • Escalonamento permitido sem processamento de ourelas, lado direito

Examples
Escalonamento permitido sem processamento de ourelas, lado direito

Allowed stepping: 1 needle (standard)

Allowed stepping: 2 needles

Allowed stepping: ≥ 3 needles

:

The yarn carrier is kicked and then with the module for knitting-in is fed to the following knitting row.

Selection Módulo para processamento de ourelas à esquerda and Módulo para processamento de ourelas à direita for the borders of a color field:

For the border processing of a color area there are different knitting techniques available as technical modules.

: The Malha retida, --v--, Processamento de ourelas technical module is used by default.

  • Módulo para processamento de ourelas à esquerda
  • Módulo para processamento de ourelas à direita

Examples for Módulo para processamento de ourelas à direita

14

Border processing in the carriage stroke from right to left

2

Border processing in the carriage stroke from left to right

Black marking = Intarsia binding

About the procedure based on the technical module for border processing at the right Malha retida, --v--, Processamento de ourelas

A

The information is entered 1 time each at the start and end of the knitting row

B

The information is entered x times according to the step width.

: The entire steps width minus 2x area width (A) minus preset under Allowed stepping without border processing at the right (C) = rest of the step width. This rest is now filled up with area width (B).

C

The information is entered x times according to the preset under Allowed stepping without border processing at the right.

    11
    Start Technical Processing:
    12
    Generate Sintral.
    13
    Start the Controle Sintral.
    14
    Extrair the knitting program.
  1. A program for the knitting machine will be created: CMS530. Exercise_Pattern.zip.
  2. Load knitting program into the machine.

: The extracted file "CMS530.Exercise_Pattern.zip" can be loaded onto the machine with an USB stick or via Ethernet.