1. GKS User Guide
  2. For Example
  3. Colored Stripe
  4. Create a New Dimensioned Shape

Create a New Dimensioned Shape

  • The measure unit cm is set.
  1. Select the basic shape type Set-in Sleeve with Shoulder Gore on the Start page under the New Dimensioned Shape section in the left detail column.
  • The possible settings for the selected shape type appear in the middle detail column.
  1. Select the Shoulder Gore option in the Shoulder list box.
  1. Select the V-neck option in the Neckline and Opening list box.
  1. Select the Left Shoulder option in the Seam Position of Collar list box.
  1. Keep the Widening above the armhole narrowing at the front check box deactivated.
  1. Keep the Widening above the armhole narrowing at the back check box deactivated.
  1. Select the Without Widening or Narrowing option in the Waist list box.
  1. Select the Upright to the Shoulder option in the Dimensioning of the Armhole list box.
  1. Select the Up to the Start of the Shoulder option in the Dimensioning of the Sleeve Length: list box.
  1. Enter the value 32 in the Pattern group box under Stitch Density [10 cm] in the edit box for the Width
  1. Enter the value 38 in the edit box for the Height by Rows .
  1. Select the Stitch v, with Transfer option in the Filling Element list box.
  1. Enter the value 36 in the Waistband of Body group box in the edit box for the Width under Stitch Density [10 cm].
  1. Enter the value 42 in the edit box for the Height by Rows .
  1. Activate the Knitting Element for the Start check box.
  • The options for the waistband of the body appear.
  1. Select Start, 1x1 in the Start module list box.
  1. Select the option 1 System in the Number of Systems list box.
  1. Select the option With elastic thread at the rear in the Elastic Thread list box.
  1. Select the option With protection yarn in the Protection Yarn list box.
  1. Select the option Loose row in the Transition list box.
  1. Select the Fair Isle + Doubling, Stitch v option in the Knitting Element for Doubling list box.
  1. Enter the value 36 in the edit box for the Width under Stitch Density [10 cm] of the Cuff of Sleeve group box.
  1. Enter the value 42 in the edit box for the Height by Rows .
  1. Activate the Knitting Element for the Start check box.
  1. Select Start, 1x1 in the Start module list box.
  1. Select the option 1 System in the Number of Systems list box.
  1. Select the option With elastic thread at the rear in the Elastic Thread list box.
  1. Select the option With protection yarn in the Protection Yarn list box.
  1. Select the option Loose row in the Transition list box.
  1. Select the Fair Isle + Doubling, Stitch v option in the Knitting Element for Doubling list box.
  1. Go to the Collar and Trimmings.
  1. Enter the value 36 in the edit box for the Width under Stitch Density of the Start [10 cm].
  1. Enter the value 42 in the edit box for the Height by Rows .
  1. Enter the value 32 in the edit box for the Width under Stitch Density within Trimming [10 cm].
  1. Enter the value 38 in the edit box for the Height by Rows .
  1. Select the Stitch v, with Transfer option in the Filling Element list box.
  1. Activate the Knitting Element for the Start check box.
  1. Select Start, 1x1 in the Start module list box.
  1. Select the option 1 System in the Number of Systems list box.
  1. Select the option With elastic thread at the rear in the Elastic Thread list box.
  1. Select the option With protection yarn in the Protection Yarn list box.
  1. Select the option Loose row in the Transition list box.
  1. Select the Fair Isle + Doubling, Stitch v option in the Knitting Element for Doubling list box.
  1. Click the Create Dimensioned Shape button.
  • The dimensioned shape appears in the Dimensioning View.
Additional Information