How to Load a New License to the Smart Card

  1. E-mail with credit code
  2. STOLL KM.ON Smart Card at the computer
    1
    Start the CREATE PLUS CREATE DESIGN CREATE LITE.
    2
    If your STOLL KM.ON Smart Card has no license or an invalid license, this input window appears.

    - or -
    Open the input window purposefully.
    File ribbon / Support / Enter Product Key button
    3
    Compare the serial number of the Smart Card in the input window with the one in the e-mail.
    4
    Copy the credit code to the clipboard.
    5
    Click the Paste button at left of the edit boxes.
    6
    Click the OK button.
  1. The successful loading of the card is confirmed to you.

If the credit is already expired:

  1. E-mail with credit code
  2. STOLL KM.ON Smart Card at the computer
  3. No other Smart Card is connected to the current M1plus workstation.
    1
    Start the M1plus .
    2. 2
    Copy the Charge Code to the clipboard.
    3
    Paste Charge Code from the clipboard into the Key edit box.
    4
    Confirm input with OK.
  1. The successful loading of the card is confirmed to you after a short time.

If the credit is not yet expired or for additional features.

  1. E-mail with credit code
  2. STOLL KM.ON Smart Card at the computer
  3. No other Smart Card is connected to the current M1plus workstation.
    1
    Start the Command Prompt.
    Command Prompt.
    2
    Change to the disk drive of the M1plus installation.
    3
    Enter the file path to the M1.exe application file.
    Example: "C:\Program Files (x86)\Stoll\M1plus\6.10.021\bin\m1.exe"
    4
    Add –EVP to the input.
    "C:\Program Files (x86)\Stoll\M1plus\6.10.021\bin\m1.exe" -EVP
    5
    Copy the Charge Code to the clipboard.
    6
    Add the Charge Code from the clipboard to the input.
    7
    Confirm the entry with the Enter key.
  1. The successful loading of the card is confirmed to you after a short time.
    2. 8
    Exit the Command Prompt.

Start CREATE, if the credit is not yet expired or for additional features.

    1
    Start the CREATE PLUS or CREATE LITE.
    2
    Open the input window purposefully.

    File ribbon / Support / Enter Product Key button
    3
    Compare the serial number of the Smart Card in the input window with the one in the e-mail.
    4
    Copy the credit code to the clipboard.
    5
    Click the Paste button at left of the edit boxes.
    6
    Click the OK button.
  1. The successful loading of the card is confirmed to you.